clamped pdf Datasheet P12 Full Text Search --- IC-ON-LINE

clamped Datasheet PDF File

For clamped Found Datasheets File :: 9063 Search Time::0.984ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | <12> | 13 | 14 | 15 |

				MICREL[Micrel Semiconductor]
Part No.	MIC2557 MIC2557BM MIC2557BMTR
OCR Text	...e and EN0 = EN1 = 0, VPP OUT is clamped to ground, providing a logic low signal. The clamp does not require DC bias current for operation. MOSFET drive and bias voltage is derived from VPP IN. Internal device control logic is powered from V...
Description	PCMCIA Card Socket VPP Switching Matrix
File Size	51.40K / 6 Page	View it Online	Download Datasheet

				MICREL[Micrel Semiconductor]
Part No.	MIC2558 MIC2558BM MIC2558BMR MIC2558BMT
OCR Text	...e and EN0 = EN1 = 0, VPP OUT is clamped to ground, providing a logic low signal. The clamp does not require any DC bias current for operation. VPP IN +12V Micrel MOSFET drive and bias voltage is derived from VPP IN. Internal device con...
Description	PCMCIA Dual Card Socket VPP Switching Matrix
File Size	61.10K / 6 Page	View it Online	Download Datasheet

				Micrel Semiconductor,Inc. MICREL[Micrel Semiconductor]
Part No.	MIC2560 MIC2560-0BWM MIC2560-1BWM
OCR Text	...tput Rise Time select VPP OUT = clamped to ground 1 0.2 0.55 0.7 2 0.75 1 1 3 2 10 A A k Logic 1 Input Voltage Logic 0 Input Voltage Input Current 0 V < VIN < 5.5V 2.2 -0.3 15 0.8 1 V V A Parameter Conditions Min Typ Max Units VPP Swi...
Description	PCMCIA Card Socket VCC and VPP Switching Matrix
File Size	57.36K / 12 Page	View it Online	Download Datasheet

				MICREL[Micrel Semiconductor] Micrel Semiconductor,Inc. Micrel Semiconductor, Inc.
Part No.	MIC2561 MIC2561-0BM MIC2561-1BM
OCR Text	...VPP OUT = 3.3V Select VPP OUT = clamped to Ground 0.1 50 A 0.2 0.55 0.7 2 0.75 1 1 3 2 A RO Switch Resistance, IPP OUT = 50A (Sinking) k VPP SWITCHING TIME (See Figure 1) t1 t2 t3 t4 t5 t6 Output Turn-On Rise Time Output ...
Description	PCMCIA Card Socket VCC & VPP Switching Matrix PCMCIA Card Socket VCC & VPP Switching Matrix 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14
File Size	50.79K / 8 Page	View it Online	Download Datasheet

				Micrel Semiconductor,Inc. MICREL[Micrel Semiconductor]
Part No.	MIC2562A MIC2562A-0BM MIC2562A-1BM
OCR Text	... mA (Sourcing) Select VPP OUT = clamped to ground IPP OUT = 50A (Sinking) 0.2 1 10 A 0.4 1.8 3.3 2.5 5 A RO Switch Resistance, Select VPP OUT = 12V Switch Resistance, Select VPP OUT = 0V 0.6 1 RO 2500 3900 ...
Description	PCMCIA/CardBus Socket Power Controller
File Size	100.21K / 9 Page	View it Online	Download Datasheet

				Micrel Semiconductor,Inc. MICREL[Micrel Semiconductor]
Part No.	MIC2563A MIC2563A-0BSM MIC2563A-1BSM
OCR Text	... mA (Sourcing) Select VPP OUT = clamped to ground IPP OUT = 50A (Sinking) 0.2 1 10 A 0.3 1.8 3.3 2.5 5 A 2 RO Switch Resistance, Select VPP OUT = 12V Switch Resistance, Select VPP OUT = 0V 0.6 1 RO 2500 39...
Description	Dual Slot PCMCIA/CardBus Power Controller Preliminary Information
File Size	113.80K / 10 Page	View it Online	Download Datasheet

				http:// MICREL[Micrel Semiconductor] Micrel Semiconductor,Inc. Micrel Semiconductor, Inc. MICREL INC
Part No.	MIC29371-12BT MIC29371-12BU MIC29371-3.3BT MIC29371-3.3BU MIC29371-5.0BT MIC29371-5.0BU MIC29372BT MIC29372BU MIC2937A MIC2937A-12BT MIC2937A-12BU MIC2937A-3.3BT MIC2937A-3.3BU MIC2937A-5.0BT MIC2937A-5.0BU
OCR Text	...he output voltage must be diode clamped to ground. Note 12: Maximum positive supply voltage of 60V must be of limited duration (< 100ms) and duty cycle ( 1%). The maximum continuous supply voltage is 26V. Schematic Diagram IN FEEDBACK ...
Description	750mA Low-Dropout Voltage Regulator 5 V FIXED POSITIVE LDO REGULATOR, 0.75 V DROPOUT, PSSO3 750mA Low-Dropout Voltage Regulator 3.3 V FIXED POSITIVE LDO REGULATOR, 0.75 V DROPOUT, SFM3 750mA Low-Dropout Voltage Regulator 3.3 V FIXED POSITIVE LDO REGULATOR, 0.75 V DROPOUT, PSSO3 750mA Low-Dropout Voltage Regulator 12 V FIXED POSITIVE LDO REGULATOR, 0.75 V DROPOUT, SFM5
File Size	128.22K / 9 Page	View it Online	Download Datasheet

				Micrel Semiconductor,Inc. MICREL[Micrel Semiconductor]
Part No.	MIC4684 MIC4684BM
OCR Text	...ring the OFF time the SW pin is clamped by the output schottky diode to a -0.5V typically. Ground (GND, pins 2,6,7) There are two main areas of concern when it comes to the ground pin, EMI and ground current. In a buck regulator or any othe...
Description	150000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN 2A High-Efficiency SuperSwitcher Buck Regulator
File Size	212.22K / 16 Page	View it Online	Download Datasheet

				MICREL[Micrel Semiconductor] Micrel Semiconductor,Inc.
Part No.	MIC4685 MIC4685BR
OCR Text	...ring the OFF time the SW pin is clamped by the output Schottky diode to a -0.5V typically. Ground (GND, Pin 4, Tab) There are two main areas of concern when it comes to the ground pin, EMI and ground current. In a buck regulator or any othe...
Description	3A SPAK SuperSwitcher?/a> Buck Regulator 3A SPAK SuperSwitcher⑩ Buck Regulator 3A SPAK SuperSwitcher Buck Regulator 3A SPAK SuperSwitcherBuck Regulator
File Size	152.19K / 15 Page	View it Online	Download Datasheet

				Micrel Semiconductor, Inc. MICREL[Micrel Semiconductor]
Part No.	MIC5010 MIC5010BM MIC5010BN
OCR Text	...of the power FET. Pin 8 will be clamped to approximately -0.7V by an internal diode when turning off inductive loads. Optional 1nF capacitors reduce gate turn-on time; C2 has dominant effect. Supply pin; must be decoupled to isolate from la...
Description	Full-Featured High- or Low-Side MOSFET Driver BUF OR INV BASED MOSFET DRIVER, PDIP14
File Size	188.93K / 16 Page	View it Online	Download Datasheet

For clamped Found Datasheets File :: 9063 Search Time::0.984ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | <12> | 13 | 14 | 15 |