VCAN26A2-03S www.vishay.com vishay semiconductors rev. 1.2, 18-jul-2018 1 document number: 85889 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bidirectional smmetrical (bis) low capacitance, dual-line esd protection diode in sot-23 marking (example only) yyy = type code (see table below) xx = date code design support tools click logo to get started features ? for can and flex-bus applications ? small sot-23 package ? aec-q101 qualified available ? 2-line esd protection ? working range 26.5 v ? low leakage current i r < 0.05 a ? low load capacitance c d < 13 pf ? esd immunity acc. iec 61000-4-2 30 kv contact discharge 30 kv air discharge ? e3 - pins plated with tin (sn) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 20512 1 3 1 2 22742 20357 yyy xx xx available model s ordering information part number (example) environmental and quality code packaging code ordering code (example) aec-q101 qualified rohs-compliant + lead (pb)-free terminations tin plated 3k per 7" reel (8 mm tape) 15k/box = moq 10k per 13" reel (8 mm tape) 10k/box = moq standard green VCAN26A2-03S - e 3 -08 VCAN26A2-03S-e3-08 VCAN26A2-03S h e 3 -08 VCAN26A2-03She3-08 VCAN26A2-03S - e 3 -18 VCAN26A2-03S-e3-18 VCAN26A2-03S h e 3 -18 VCAN26A2-03She3-18 package data device name package name type code weight molding compound flammability rating moisture sensitivity level soldering conditions VCAN26A2-03S sot-23 6a2 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) peak temperature max. 260 c absolute maximum ratings parameter test conditions symbol value unit peak pulse current t a = 25 c, acc. iec 61000-4-5; t p = 8/20 s; single shot i ppm 3a peak pulse power t a = 25 c; pin 1 or 2 to pin 3; acc. iec 61000-4-5; t p = 8/20 s; single shot p pp 150 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses, t a = 25 c v esd 30 kv air discharge acc. iec 61000-4-2; 10 pulses, t a = 25 c 30 kv operating temperature junction temperature t j -55 to +150 c storage temperature t stg -55 to +150 c
VCAN26A2-03S www.vishay.com vishay semiconductors rev. 1.2, 18-jul-2018 2 document number: 85889 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tpical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - esd discharge current wave form acc. iec 61000-4-2 (330 / 150 pf) fig. 2 - 8/20 s peak pulse current wave form acc. iec 61000-4-5 fig. 3 - 10/1000s peak pulse current wave form fig. 4 - typical capacitance vs. reverse voltage electrical characteristics (pin 1 to 3, 3 to 1, 2 to 3, or 3 to 2) (t amb = 25 c, unless otherwise specified) parameter test conditions/remarks symbol min. typ. max. unit protection paths number of li nes which can be protected n channel --2l i n e s reverse stand-off voltage max. reverse working voltage v rwm - - 26.5 v reverse voltage at i r = 0.05 a v r 26.5 - - v reverse current at v rwm = 26.5 v i r - - 0.05 a reverse breakdown voltage at i r = 1 ma v br 28 30 32 v reverse clamping voltage at i pp 1 a; t p = 8/20 s v c -3 34 0v at i pp = i ppm = 3 a; t p = 8/20 s v c -3 95 0v capacitance at v r = 0 v, f = 1 mhz c d -1 01 3p f diode capacitance matching at v r = 0 v, t j = -40 c to 125 c / c d13 vs. c d23 c d --1 . 5p f 10 100 1000 10000 0 20 40 60 80 100 120 -10 0 10 20 30 40 50 60 70 80 90 100 axis title 1st line 2nd line 2nd line i esd (%) t (ns) 2nd line rise time = 0.7 ns to 1 ns 5327 20557 10 100 1000 10000 0 20 40 60 80 100 01 02 03 04 0 axis title 1st line 2nd line 2nd line i ppm (%) t (s) 2nd line 20 s to 50 % 8 s to 100 % 20548 10 100 1000 10000 0 10 20 30 40 50 60 70 80 90 100 110 0 1000 2000 3000 axis title 1st line 2nd line 2nd line i rsm (%) t (s) 2nd line 1000 s to 50 % rise time 10 s to 100 % 22920 10 100 1000 10000 0 2 4 6 8 10 12 01 02 03 0 axis title 1st line 2nd line 2nd line c d (pf) v r (v) 2nd line f = 1 mhz 22921
VCAN26A2-03S www.vishay.com vishay semiconductors rev. 1.2, 18-jul-2018 3 document number: 85889 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical reverse voltage vs. reverse current fig. 6 - typical peak clamping voltage vs. peak pulse current fig. 7 - typical peak clamping voltage vs. peak pulse current fig. 8 - typical clamping voltage vs. peak pulse current 15 20 25 30 35 0.001 0.01 0.1 1 10 100 1000 2nd line v r (v) i r (a) 2nd line 22922 t a = 25c t a = 50c t a = 75c t a = 100c t a = 125c t a = 150c 10 100 1000 10000 0 5 10 15 20 25 30 35 40 45 012345 axis title 1st line 2nd line 2nd line v c (v) i pp (a) 2nd line measured according iec 61000-4-5 (8/20 s - wave form) 22923 0 5 10 15 20 25 30 35 40 45 0 0.2 0.4 0.6 2nd line v c (v) i pp (a) 2nd line measured witth 10/1000 s - wave form. single pulse. 22924 10 100 1000 10000 0 10 20 30 40 50 60 70 80 90 0 1 02 03 04 05 06 0 axis title 1st line 2nd line 2nd line v c-tlp (v) i tlp (a) 2nd line transmission line pulse (tlp): t p = 100 ns 22925
VCAN26A2-03S www.vishay.com vishay semiconductors rev. 1.2, 18-jul-2018 4 document number: 85889 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches) sot-23 orientation in carrier tape sot-23 foot print recommendation: rev. 8 - date: 23. s ep. 2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.) s ot-23 top view unreeling direction orientation in carrier tapes ot-23 s 8-v-3929.01-006 (4) 04.02.201022607
VCAN26A2-03S www.vishay.com vishay semiconductors rev. 1.2, 18-jul-2018 5 document number: 85889 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 carrier tape sot-23 a a-a s ection a 0.229 0.013 3.15 0.1 bb b-b s ection 2 0.05 ? 1 0.05 4 0.1 4 0.1 1.22 0.1 3.5 0.05 2.77 0.1 1.75 0.1 ? 1.5 +0.10.0 8 +0.3-0.1 created - date: 04. feb. 2010 carrier tape s ot-23 document no.: s 8-v-3929.01-005 (4) 22856
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
