outline drawing maximum ratings outline dimensions ( ) inch mm low pass filter electrical specifcations operating temperature -55c to 100c storage temperature -55c to 100c rf power input 0.5w max. applications ? test equipment ? lab use ? transmitters/receivers ? military/hi-rel applications features ? rugged welded case, hermetic ? other standard and custom plp models available with wide selection of fco low pass filter plp-1.9+ rev. b m151107 plp-1.9+ 150928 50 ? dc to 1.9 mhz passband (mhz) fco (mhz) nom. stopband (mhz) vswr (:1) (loss < 1 db) (loss 3 db) (loss > 20 db) (loss > 40 db) passband ty p. stopband ty p. dc-1.9 2.5 3.4-4.7 4.7-200 1.7 18 electrical schematic r f i n r f o u t insertion loss 0 20 40 60 80 100 0.1 1 10 100 1000 frequency(mhz) insertion loss (db) at rf level of 0 dbm return loss 0 10 20 30 40 50 0.1 1 10 100 1000 frequency(mhz) return loss (db) at rf level of 0 dbm group delay 0 200 400 600 800 1000 1.0 1.7 2.4 3.1 3.8 frequency (mhz) group delay (nsec) at rf level of 0 dbm typical frequency response typical performance data frequency (mhz) insertion loss (db) return loss (db) frequency (mhz) group delay (nsec) _ x 0.10 0.09 0.01 40.00 1.00 390.94 1.20 0.24 0.02 22.11 1.00 393.92 1.40 0.26 0.01 23.88 1.10 397.21 1.60 0.31 0.01 26.19 1.10 400.27 1.80 0.40 0.02 21.19 1.20 406.34 1.90 0.45 0.02 21.37 1.30 410.76 2.10 0.75 0.12 15.39 1.30 417.77 2.30 2.93 0.75 5.05 1.40 425.39 2.50 8.32 1.21 1.43 1.40 434.33 2.70 14.69 1.17 0.59 1.50 444.37 2.80 17.71 1.12 0.45 1.60 455.27 3.00 23.30 1.01 0.32 1.60 468.79 3.10 25.89 0.96 0.29 1.70 484.50 3.30 30.68 0.90 0.24 1.80 506.65 3.40 32.92 0.87 0.22 1.90 554.15 3.60 37.12 0.84 0.20 1.90 579.78 3.80 41.00 0.81 0.18 2.00 642.41 4.00 44.61 0.79 0.17 2.10 720.76 4.30 49.67 0.81 0.15 2.20 779.41 4.50 52.78 0.80 0.14 2.30 768.87 4.70 55.74 0.88 0.13 2.40 675.19 5.00 60.00 0.86 0.11 2.50 579.64 29.40 92.50 4.17 0.17 2.70 390.84 53.80 91.19 3.63 0.42 2.80 286.22 78.10 92.39 2.10 0.45 3.00 230.56 102.50 87.80 2.75 0.46 3.10 182.81 126.90 89.05 3.87 0.47 3.30 153.96 151.30 87.17 2.60 0.46 3.40 132.22 175.60 92.87 7.14 0.44 3.60 109.19 200.00 86.82 4.04 0.44 3.80 92.80 1 db compression at +13 dbm input power 4 0 d b 2 0 d b 3 d b 1 d b f r e q u e n c y / f c o a t t e n u a t i o n , d b d c 0 . 9 1 1 . 3 5 1 . 7 5 3 plug-in a b c d e f . 770 . 800 . 385 . 400 . 370 . 400 19.56 20.32 9.78 10.16 9.40 10.16 g h j k w t . 200 . 20 . 14 . 031 g rams 5.08 5.08 3.56 0.79 5 .2 pin connections input 1 output 8 ground 2,3,4,5,6,7 case ground 2,3,4,5,6,7 permanent damage may occur if any of these limits are exceeded. case style: a01 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|