mixers - i/q mixers, irms & receivers - smt 1 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz general description features typical applications functional diagram the HMC709LC5 is a compact gaas mmic i/q upconverter in a leadless rohs compliant smt package. this device provides a small signal conversion gain of 13 db with -20 dbc of sideband rejection. the HMC709LC5 utilizes a driver amplifer preceded by an i/q mixer which is driven by an lo buffer amplifer. if1 and if2 mixer inputs are provided and an external 90 hybrid is needed to select the required sideband. the i/q mixer topology reduces the need for fltering of the unwanted sideband. the HMC709LC5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. electrical specifcations, t a = +25 c, if = 1000 mhz, lo = +6 dbm, vdd1, 2 = +5v [1] parameter min. typ. max. units frequency range, rf 11 - 17 ghz frequency range, lo 10 - 18 ghz frequency range, if dc - 3.75 ghz conversion gain 10 13 db sideband rejection -12 -20 dbc 1 db compression (output) 20.5 dbm lo to rf isolation 10 db lo to if isolation [2] 15 db ip3 (output) 26 dbm supply current idd1 68 105 115 ma supply current idd2 80 127 150 ma [1] unless otherwise noted all measurements performed with high side lo, if= 1000 mhz and external 90 if hybrid. [2] data taken without external if hybrid the HMC709LC5 is ideal for: ? point-to-point and point-to-multi-point radio ? military radar, ew & elint ? ku band vsat upconverters ? sensors ? test & measurement equipment high conversion gain: 13 db sideband rejection: -20 dbc lo to rf isolation: 10 db output ip3: +26 dbm 32 lead 5x5mm smt package: 25mm2 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
mixers - i/q mixers, irms & receivers - smt 2 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz data taken as ssb upconverter with external if hybrid conversion gain vs. temperature rf, lo return loss [1] conversion gain vs. if frequency conversion gain vs. lo drive if return loss [1] 8 10 12 14 16 18 20 11 12 13 14 15 16 17 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) -20 -16 -12 -8 -4 0 5 7 9 11 13 15 17 19 21 lo rf return loss (db) frequency (ghz) 8 10 12 14 16 18 20 11 12 13 14 15 16 17 if = 100mhz if = 1000mhz conversion gain (db) rf frequency (ghz) -30 -25 -20 -15 -10 -5 0 012345 if1 if2 return loss (db) if frequency (ghz) 8 10 12 14 16 18 20 11 12 13 14 15 16 17 +3 dbm +6 dbm +9 dbm conversion gain (db) rf frequency (ghz) side band rejection [1] data taken without external if hybrid -30 -25 -20 -15 -10 11 12 13 14 15 16 17 sideband rejection (dbc) rf frequency (ghz) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
mixers - i/q mixers, irms & receivers - smt 3 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz output p1db vs. temperature output ip3 vs. temperature [2] output ip3 vs. lo drive [2] mxn spurious outputs [1] nlo mif 0 1 2 3 4 0 xx 6 37 46 xx 1 62 0 45 65 xx 2 39 47 50 72 xx 3 74 50 73 77 xx 4 68 91 76 94 xx if = 1 ghz @ -8 dbm lo = 14 ghz @ 6 dbm data taken without if hybrid all values in dbc below rf power level (-1if + 1lo) 25 26 27 28 29 30 11 12 13 14 15 16 17 +3 dbm +6 dbm +9 dbm ip3 (dbm) rf frequency (ghz) 25 26 27 28 29 30 11 12 13 14 15 16 17 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 18 19 20 21 22 23 11 12 13 14 15 16 17 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) isolations [1] -70 -60 -50 -40 -30 -20 -10 0 11 12 13 14 15 16 17 lo/rf if1/rf lo/if1 if2/rf lo/if2 isolation (db) rf frequency (ghz) lo freq. (ghz) nlo spur @ if port 1 2 3 4 12 16 23 58 xx 13 15 31 50 xx 14 13 50 51 xx 15 10 37 xx xx 16 10 44 xx xx 17 11 54 xx xx 18 14 68 xx xx 19 16 51 xx xx harmonics of lo [1] data taken without external if hybrid [2] two tone input power = -8 dbm, 1 mhz spacing data taken as ssb upconverter with external if hybrid for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
mixers - i/q mixers, irms & receivers - smt 4 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz absolute maximum ratings drain bias voltage (vdd1, 2) 5.5v if input power (if1, if2) 20 dbm lo drive (lo in) 20 dbm channel temperature 175c continuous pdiss (t = 85 c) (derate 18.3 mw/ c above 85 c) 1.65 mw thermal resistance (channel to ground paddle) 54.6 c/w storage temperature -65 to +150 c operating temperature -55 to +85 c electrostatic sensitive device observe handling precautions outline drawing notes: 1. package body material: alumina 2. lead and ground paddle plating: 30 - 80 microinches gold over 50 microinches minimum nickle 3. dimensions are in inches [millimeters] 4. lead spacing tolerance is non-cumulative 5. package warp shall not exceed 0.05mm datum 6. all ground leads and ground paddle must be soldered to pcb rf ground package information part number package body material lead finish msl rating package marking [2] HMC709LC5 alumina, white gold over nickel msl3 [1] h709 xxxx [1] max peak refow temperature of 260 c [2] 4-digit lot number xxxx for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
mixers - i/q mixers, irms & receivers - smt 5 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz pin number function description interface schematic 1 - 6, 8, 12 - 19, 22 - 25, 27, 28 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. 7 vdd1 power supply voltage for lo amplifer. see application circuit for required external components. 9, 11, 20, 30, 32 gnd package bottom must be connected to rf/dc ground. 10 loin this pin is ac coupled and matched to 50 ohms. 21 rfout this pin is ac coupled and matched to 50 ohms. 26 vdd2 power supply voltage for rf amplifer. see application circuit for required external components. 29 if1 differential if input pins. for applications not requiring operation to dc, an off chip dc blocking capacitor should be used. for operation to dc this pin must not source/sink more than 3ma of current or part non- function and possible part failure will result. 31 if2 pin descriptions application circuit for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
mixers - i/q mixers, irms & receivers - smt 6 HMC709LC5 v05.0514 gaas mmic i/q upconverter 11 - 17 ghz evaluation pcb the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 120408 [1] item description j1, j2 pcb mount sma connector j3, j4 pcb mount sma sri connector j5 - j8 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3, c4 1000 pf capacitor, 0603 pkg. c5, c6 2.2 f tantalum capacitor case a u1 HMC709LC5 upconverter pcb [2] 123310 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 or arlon 25 fr, fr4 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
|
