- 46 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 gt sensors ? precision gear tooth and encoder sensors nve?s gt sensor ? products are based on a low hysteresis gmr sensor material and are designed for use in industrial speed applications where magne tic detection of gear t eeth and magnetic encoder wheels is required. gt sensors with both analog and digital outputs are av ailable. the analog parts feature the large signal and robust characteristics which nve?s gmr materi als are known for (nve?s gmr sensors are not damaged by extremely large magnetic fields). the se nsor elements themselves are designed to provide usable output with even the smallest gear teeth. single and double output versions are available; the second output is phase shifted with respect to the first, to provide qu adrature for determining direction. the digital sensors take advantage of the high performance characteristic s of gmr sensors to provide a 50% duty cycle output with a wide tolerance in airgap and temperature variations. gt sensors are available in low-profile msop8, tdfn so8, and tdfn6 packages, in order to fit into the tightest possible spaces. an evaluation kit is available, containing a selection of sensors, magnets, and pcbs, so that the user can test the parts in their application
- 47 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 abl sensors single/double bridge gear tooth and encoder sensors features: ? large airgap ? direct analog output ? dc (zero speed) operation ? sine / cosine outputs ? precise spacing and phase shif ting between sensor elements ? excellent temperature an d voltage performance ? small, low-profile su rface mount packages applications: ? linear and angular speed sensing ? linear and angular position sensing ? direction detection description: the abl-series gt sensors are differential sensor el ements that provide an analog sinusoidal output signal when used with a bias magnet and gear tooth or a magnetic encoder. these chips use nve?s proprietary gmr sensor elements featuring an extremely large output signal from the raw sensor element, which is stable over the rated temperatur e and voltage range. as a result, abl-series gt sensors feature excellent ai rgap performance and an extremely stab le operating envelope as well as the robust reliability characteristics th at nve sensors are known for. three different standard spacings are available for use with fine and coarse pitch encoders and gear teeth. both single bridge and double bridge configurations are also available. double bridges are used to generate sine/cosine outputs. in addition to th e standard spacings, nve can provide custom spacings and multiple sensor elements tailored to the individual customer?s application for a nominal design and tooling charge. contact nve for further details. for digital output applications, these sensors can be used with nve?s dd001-12 signal processing ic which converts their output into a 50% duty cycle modulated current signal. this ic allows placement of the abl sensor in a very small housing with wires running from the sensor to the signal processing ic in a remote location. thus abl-series sensors can be used in m8 and smaller housings.
- 48 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 specifications: parameter min typ max unit single bridge resistance at 25c 4k 5k 7k ohms input voltage <1 1 30 1 volts operating temperature range -50 +150 c offset voltage -4 +4 mv/v linear range 5 100 oe linearity of output 98 % 2 hysteresis 2 % 2 saturation of gmr sensor elements -180 +180 oe 3 single resistor sensitivity .04 % ? r/oe 4 max output 80 mv/v temperature coefficient of resistance +0.11 %/ c esd 400 v 5 storage temperature range -65 +170 c notes: 1. abl-series sensors have a purely rati ometric output. they will operate with inpu t voltages of 0.1 v or lower. the output signal will scale proportionally with the input voltage. maximum voltage will be limited by the power dissipation allowable in the package and user installation. see the package section for more details. 2. linearity and hysteresis measured across li near operating range, unipolar operation. 3. application of a magnetic field in excess of this value will saturate the gmr sensor elements and no further output will be obtained. no damage occurs to the sensor elements when saturated. nve gmr sensors will not be damaged by any large magnetic field. 4. percent change in resistance with application of 1 oersted of magnetic field; corresponds to an 8% change in resistance with 200 oersteds of applied magnetic field (1 oersted = 1 gauss in air, or 0.1 millitesla). 5. pin-to-pin voltage, human body model for esd.
- 49 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 ic drawings: 0.250 1.000 1.000 0.500 0.250 0.125 0.125 0.500 0.500 0.250 1.000 0.500 0.500 0.250 - all dimensions in mm - all resistors are 5k ? - sensor elements are located symmetrically about the center of the ic. 0.125 0.140 center of die and package abl014 abl015 abl004 abl005 note: abl006 abl016 sensor element size and spacing not shown
- 50 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 schematics: part numbers and configurations: part number single or dual bridge element spacing (microns) phase shift between bridges (microns) package marking abl004-00 single 1000 na fdb abl005-00 single 500 na fdc abl006-00 single 300 na fdl abl014-00 dual 1000 500 fdd abl015-00 dual 500 250 fdf abl016-00 dual 300 150 fdm abl004-10 single 1000 na fdg abl005-10 single 500 na fdh abl006-10 single 300 na fdn abl014-10 dual 1000 500 fdj abl015-10 dual 500 250 fdk abl016-10 dual 300 150 fdp r2 r1 out+ gnd vcc out- r4 r3 abl004, abl005, abl006 schematic r2 r1 out+1 gnd1 vcc1 out-1 r4 r3 r6 r5 out+2 gnd2 vcc2 out-2 r8 r7 abl014, abl015, abl016 schematic (dual bridge)
- 51 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 packages: the abl-series parts are available in msop8 an d tdfn6 packages. please see the package drawing section in the appendix for dimensions. please note that for dual differential sensors in the tdfn package the power and ground connect ions for both bridges are common. pin configuration: msop8 package tdfn6 package direction of sensitivity abl004-00, abl005-00, abl006-00 out+ no connect ground vcc out- no connect no connect no connect abl014-00, abl015-00, abl016-00 ground1 out-1 vcc1 vcc2 ground2 out+1 out-2 out+2 direction of sensitivity abl004-10, abl005-10, abl006-10 out+ gnd vcc out- no connect no connect abl014-10, abl015-10, ground1, ground2 out+1 vcc1 vcc2 out-2 out-1 out+2 abl006-10 abl016-10
- 52 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 akl sensors digital output gear tooth and encoder sensors features: ? large airgap ? 50% duty cycle ? dc (zero speed) operation ? precise spacing between sensor elements ? excellent temperature an d voltage performance ? small, low-profile surface mount package applications: ? anti-lock brake system sensors ? transmission speed sensors ? industrial linear and angular speed sensing ? linear and angular position sensing description: nve offers these products specifica lly for use as sensors for gear tooth wheels or magnetic encoders with a digital output signal. the pulse output from the sensor corresponds with the gear teeth passing in front of it. when a gear tooth or magnetic pole is in front of the sensor, the sensor?s output goes high; when the gear tooth or magnetic pole moves away, the output returns to low. this repeats at every tooth/pole resulting in a pulse train output that provides speed information from the gear or encoder. three part numbers are currently availabl e: the akl001-12 is designed for gear teeth or encoders with a pitch of 2.5 to 6 mm, the akl002-12 for a pitch of 1 to 2.5 mm, and the akl003-12 for a pitch of 0.6 to 1.5 mm. in order to minimize the number of wires leading to the sensor, the part is configured as a two-wire device. the two output states are in dicated with a change of current through the part. therefore, when the part is in the digital low state, current is about 3 ma. when the part is in the digital high state, the current increases to about 10 ma. if necessary, the two-wire output of the akl-series parts can be easily converted to a three-wire current sinking output with the circuit shown in the gt sensor applications section. the parts are rated for the full au tomotive and industrial temperatur e range, -40c to +150c. they feature reverse battery protection and have an operational voltage range of 4.5v to 36v. they operate from dc to 10 khz. the parts are available in low-profile, surface mount tdfn so8 packages.
- 53 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 specifications: parameter min typ max unit input voltage 4.5 36 volts 1 supply current in off state (input voltage=12v) 3.2 4.0 4.8 ma 2 supply current in on state (input voltage=12v) 7.0 8.0 9.0 ma 2 output duty cycle 40 50 60 % operating temperature range -40 +150 c akl001-12 airgap, over full temperature and voltage range 4 1.0 3.5 mm akl002-12 airgap, over full temperature and voltage range 4 1.0 2.5 mm akl003-12 airgap, over full temperature and voltage range 4 1.0 2.0 mm frequency of operation 0 10k hz esd 2000 v 3 absolute maximum ratings parameter limit supply voltage 45v reverse battery voltage -60v continuous output current 16ma junction temperature range -40 c to +170 c storage temperature range -65 c to +170 c notes: 1. the supply voltage must appear across the power and ground terminals of the part. any additional voltage drop due to the presence of a series resistor is no t included in this specification. 2. supply currents can be factory programmed to different levels, for example 3 ma and 6 ma, or 7 ma and 14 ma; contact nve for details. 3. pin-to-pin voltage, human body model for esd 4. airgap measured with standard ferrou s gear tooth; contact nve for details. current output (ma) time 5 10 signal output
- 54 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 ic drawings: the akl-series products use the abl sensor elements described earlier in this section. the akl001- 12 part uses the abl004 sensor element, the akl0 02-12 uses the abl005 sensor element, and the akl003-12 uses the abl006 sensor element. please see the ic drawings in the abl-series section for more information. part numbers and configurations: part number single or dual bridge element spacing (microns) marking akl001-12 single 1000 part number akl002-12 single 500 part number akl003-12 single 300 part number schematic: a block diagram of the akl-series parts is shown below: packages: the akl-series parts are available in the tdfn 8 so8 package. please s ee the package drawing section in the appendix for dimensions. voltage regulator gmr bridge eeprom offset detector gain switching current source current level a a 3.3v
- 55 - www.nve.com phone: 952-829-9217 fax: 952-829-9189 pin configuration: tdfn8-so8 package test test vcc gnd bridge- test test bridge+ akl001-12 akl002-12 akl003-12 sensitivity note: bridge + and bridge - are provided for analysis purposes only. nve does not recommend connecting these pins in a production product for esd and loading reasons. also, all pins labeled ?test? must be floating, i.e., not connected to each other or any other circuit node.
|
