freq. range (mhz) isolation (db) insertion loss (db) above 3.0 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min ty p. min ty p. min ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 5-1000 24 14 23 18 24 18 0.2 0.6 0.3 0.9 0.5 1.1 1.0 3.0 5.0 0.1 0.2 0.3 l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u = upper range [f u /2 to f u ] notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 1 a b c d e f g .272 .310 .220 .100 .162 .055 .100 6.91 7.87 5.59 2.54 4.11 1.40 2.54 h j k l wt .030 .026 .065 .300 grams 0.76 0.66 1.65 7.62 0.25 2 way-0 75 ? 5 to 1000 mhz power splitter/combiner surface mount typical performance data electrical specifcations maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 0.5w max. internal dissipation 0.125w max. outline drawing outline dimensions ( ) inch mm electrical schematic pcb la n d pa t t e r n sugges t ed l a y o ut, t ol e r a nce t o b e wi t hi n ? rev. e m158496 ADP-2-10W-75+ dy/td/cp/am 171019 case style: cd636 frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 features ? wideband, 5 to 1000 mhz ? low insertion loss, 0.3 db typ. ? aqueous washable ? protected under u.s. patent 6,133,525 applications ? cellular ? vhf/uhf ? communication systems ? cat v pin connections sum port 1 port 1 3 port 2 4 ground 6 not used 2,5 demo board mcl p/n: tb-243 suggested pcb layout (pl-141) ADP-2-10W-75 + total loss 3.0 3.2 3.4 3.6 3.8 4.0 0 200 400 600 800 1000 frequency (mhz) total loss (db) s-1(db) s-2(db) ADP-2-10W-75 + isolation 10 15 20 25 30 35 0 200 400 600 800 1000 frequency(mhz) isolation (db) ADP-2-10W-75 + vswr 1.0 1.1 1.2 1.3 0 200 400 600 800 1000 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr 5.00 3.23 3.24 0.01 21.20 0.03 1.08 1.24 1.24 14.00 3.21 3.21 0.00 24.46 0.01 1.06 1.15 1.15 23.00 3.20 3.21 0.01 24.61 0.06 1.06 1.15 1.14 32.00 3.21 3.21 0.00 24.23 0.07 1.06 1.15 1.15 41.00 3.22 3.21 0.00 23.86 0.16 1.06 1.16 1.16 50.00 3.22 3.22 0.01 23.55 0.12 1.06 1.16 1.16 140.00 3.25 3.26 0.00 22.59 0.38 1.06 1.19 1.18 230.00 3.28 3.28 0.00 22.63 0.64 1.07 1.20 1.18 320.00 3.31 3.33 0.02 22.95 0.87 1.07 1.20 1.17 410.00 3.35 3.36 0.01 23.35 1.06 1.07 1.19 1.15 500.00 3.38 3.40 0.02 23.72 1.27 1.06 1.19 1.14 625.00 3.41 3.46 0.05 23.96 1.61 1.04 1.18 1.11 750.00 3.47 3.52 0.05 23.86 1.85 1.02 1.16 1.07 875.00 3.55 3.60 0.06 23.54 2.10 1.05 1.14 1.04 1000.00 3.66 3.72 0.06 23.25 2.21 1.11 1.12 1.04 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. a vailable t ape and reel at no extra cost reel size devices/reel 7? 10, 20, 50, 100, 200, 500 13? 500, 1000 ADP-2-10W-75+ +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
