pcb land pattern suggested l a yout, t o l e r a n c e t o b e w i t h i n . 0 0 2 50 ? 180 voltage variable 36 to 54 mhz phase shifter narrow band case style: bk276 demo board mcl p/n: tb-122+ suggested pcb layout (pl-030) outline dimensions ( ) inch mm maximum ratings pin connections in 1 out 7 bias 4,6^ ground 2,3,,5,8,9,10,11,12,13,14 outline drawing phase shifter electrical specifcations rev. a m151107 JSPHS-51+ ed-8482/1 wz/cp/am 150817 a bcd e fg .450 .803 -- .100 .250 .102 .100 11.43 20.40 -- 2.54 6.35 2.59 2.54 h j k l wt .047 .065 .065 .470 grams 1.19 1.65 1.65 11.94 3.0 typical performance data JSPHS-51+ operating temperature -40c to 85c storage temperature -55c to 100c rf input power 20 dbm max. control voltage 18v features ? low insertion loss, 1.2 db typ. ? good vswr, 1.3 typ. ? solder-plated j-leads for excellent solderability and strain relief ? aqueous washable applications ? if signal processing JSPHS-51+ phase shift 0 50 100 150 200 250 300 0123456789101112131415 control voltage (v) phase shift (deg.) 36 mhz 45 mhz 54 mhz JSPHS-51+ vswr 1.0 1.2 1.4 1.6 1.8 2.0 0123456789101112131415 control voltage (v) vswr 36 mhz 45 mhz 54 mhz JSPHS-51+ insertion loss 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 control voltage (v) insertion loss (db) 36 mhz 45 mhz 54 mhz frequency (mhz) phase range (degrees) insertion loss (db) control voltage (v) control bandwidth (khz) vswr (:1) min. ty p. max. ty p. ty p. max. 36-54 180 1.2 2.5 0-12 dc-50 1.2 1.8 control voltage (v) phase shift* (degrees) vswr (:1) insertion loss (db) 36 mhz 45 mhz 54 mhz 36 mhz 45 mhz 54 mhz 36 mhz 46 mhz 54 mhz * normalized at control voltage = 0v rf in contr ol v ol t a ge rf out electrical schematic maximum operating power, 0 dbm dc input resistance at control port: 9.3k ohms typ. permanent damage may occur if any of these limits are exceeded. 0.0 0.00 0.00 0.00 1.27 1.02 1.08 1.26 0.82 0.67 1.0 18.04 7.16 3.25 1.29 1.02 1.08 1.40 0.89 0.70 3.0 62.86 26.70 11.66 1.39 1.04 1.10 1.58 1.09 0.79 5.0 113.34 59.95 25.08 1.54 1.03 1.13 1.46 1.39 0.94 7.0 155.95 118.73 51.60 1.63 1.06 1.17 1.13 1.56 1.25 9.0 185.56 188.68 116.21 1.63 1.22 1.15 0.87 1.12 1.75 10.0 196.22 214.66 168.00 1.62 1.25 1.08 0.79 0.87 1.62 12.0 211.20 246.54 244.09 1.58 1.25 1.09 0.71 0.59 0.82 14.0 219.23 260.98 272.59 1.56 1.23 1.08 0.63 0.50 0.55 15.0 221.44 264.40 278.57 1.56 1.22 1.08 0.61 0.48 0.51 ^ proper operation is achieved with pins 4 or 6 or both connected to bias. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|