p/n 2450BM14E0003 detail specification: page 1 of 4 for the full app note and layout files, go to: www.johansontechnology.com/nordic mechanical dimensions in mm no. l 1 w 2 t 3 a 4 b 5 c 6 g p johanson technology, inc. reserves the right to make design changes without notice. all sales are subject to johanson technology, inc. terms and conditions. www.johansontechnology.com 4001 calle tecate ? camarillo, ca 93012, usa ? tel +1.805.389.1166 2016 johanson technology, inc. all rights reserved function dc feed part number explanation suffix = s suffix = t suffix = none e.g.. 2450BM14E0003(t or s) e.g.. 2450BM14E0003t e.g.. 2450BM14E0003s bulk t & r 100% tin packaging style termination style p/n suffix 0.031 -40 to +105c 150 15deg 4800~5000mhz +5 to +35c, humidity: 45- 75%rh, 18 mos. max 1w max.(cw) 4800~5000mhz 7200~7500mhz power capacity recommended storage conditions for unused product on t&r operating temperature 1200-1500 mhz 800-928 mhz 44 typ.@25 c 20 min. attenuation common mode (db): 21 typ.@25 c 18 min. 35 typ.@25 c 20 min. 14 typ.@25 c 10 min. 15 typ.@25 c 10 min. attenuation differential mode (db): 2.1db typ. @25c, 2.5db max. (-40 to +85c), 3.0db (+85 to 105c) 0.9db typ. @25c, 1.5db max. (-40 to +85c), 2.0db (+85 to +105c) average insertion loss when connected to the nrf51xx chipset (active op) insertion loss when component measured by itself (passive insertion loss) 4,000 pcs 15 typ. 9.5 min. 6/29/2016 reel quantity amplitude difference return loss (db) 2.45ghz impedance matched balun + band pass filter: optimized for nordic's chipsets: nrf51822-qfaa, nrf51422-qfaa, nrf51822-qfab, nrf51422-qfab, nrf51822-qfac, nrf51422-qfac, nrf51802-qfaa part number frequency (mhz) unbalanced impedance differential balanced impedance 2450BM14E0003 general specifications impedance matched to nordic semi nrf51822-qfax, nrf51422-qfax, and nrf51802-qfaa chipsets 50 ? (single ended) 2400 - 2500 0.10 0.10 0.10 0.10 0.002 0.20 0.004 0.05 +0.1/-0.15 0.10 0.004 0.20 0.10 0.004 0.004 0.30 0.50 0.012 0.004 0.024 0.006 0.15 +.004/-.006 0.008 0.008 storage temperature -40 to +85c you can download layout files, schematics, output power measured results (app note an020), and s- parameters at: http://johansontechnology.com/nordic ver. 3.0 terminal configuration gnd 0.020 0.80 unbalanced port balanced port balanced port gnd 0.063 1.60 0.004 0.60 l w c a p g b t 1 2 3 4 5 6 high frequency ceramic solutions
p/n 2450BM14E0003 detail specification: page 2 of 4 johanson technology, inc. reserves the right to make design changes without notice. all sales are subject to johanson technology, inc. terms and conditions. www.johansontechnology.com 4001 calle tecate ? camarillo, ca 93012, usa ? tel +1.805.389.1166 2016 johanson technology, inc. all rights reserved ver. 3.0 2.45ghz impedance matched balun + band pass filter: optimized for nordic's chipsets: nrf51822-qfaa, nrf51422-qfaa, nrf51822-qfab, nrf51422-qfab, nrf51822-qfac, nrf51422-qfac, nrf51802-qfaa mounting considerations solo-component characterization scheme 6/29/2016 you can download layout files, schematics, output power measured results (app note an020), and s-parameters at: http://johansontechnology.com/nordic high frequency ceramic solutions land via through * 0.3 0.25 0.55 0.25 do you need the layout/gerber files of the above? go to: www.johansontechnology.com/nordic or send us a message to review your layout at: www.johansontechnology.com/component/ ask - a - question * line width should be designed to match 50 characteristic impedance, depending on pcb material and thickness. network analyzer** port 3(50 ) gnd port 2* port 1* gnd port 3: unbalanced port ports 1 and 2: balanced port il=s ds21 , att_dm=s ds21 , att_cm=s cs21 rl=s ss11 amp_balance = db(s(1,3)/s(2,3)) phase_balance = phase(s(1,3)/s(2,3)) *impedance for ports 1 and 2 = conjugate to balanced impedance/2 **e5071b from agilent 2.2nf cap. nrf51x 1 2 3 4 5 6
p/n 2450BM14E0003 detail specification: page 3 of 4 johanson technology, inc. reserves the right to make design changes without notice. all sales are subject to johanson technology, inc. terms and conditions. www.johansontechnology.com 4001 calle tecate ? camarillo, ca 93012, usa ? tel +1.805.389.1166 2016 johanson technology, inc. all rights reserved ver. 3.0 2.45ghz impedance matched balun + band pass filter: optimized for nordic's chipsets: nrf51822-qfaa, nrf51422-qfaa, nrf51822-qfab, nrf51422-qfab, nrf51822-qfac, nrf51422-qfac, nrf51802-qfaa 6/29/2016 typical electrical characteristics (t=25 c) high frequency ceramic solutions 2.35 2.40 2.45 2.50 2.55 2.30 2.60 -2 0 2 -4 4 45 90 135 0 180 freq, ghz phase_bal_deg amp_bal_db 2 3 4 5 6 7 1 8 -40 -30 -20 -10 -50 0 freq, ghz sds21 sss11 scs21 1 2 3 4 5 6 7 0 8 -40 -30 -20 -10 -50 0 freq, ghz sds21 sss11 scs21
p/n 2450BM14E0003 detail specification: page 4 of 4 johanson technology, inc. reserves the right to make design changes without notice. all sales are subject to johanson technology, inc. terms and conditions. www.johansontechnology.com 4001 calle tecate ? camarillo, ca 93012, usa ? tel +1.805.389.1166 2016 johanson technology, inc. all rights reserved 2.45ghz impedance matched balun + band pass filter: optimized for nordic's chipsets: nrf51822-qfaa, nrf51422-qfaa, nrf51822-qfab, nrf51422-qfab, nrf51822-qfac, nrf51422-qfac, nrf51802-qfaa 6/29/2016 packaging information www.johansontechnology.com/nordic antenna layout and tuning techniques msl info http://www.johansontechnology.com/msl-rating recommended storage condition and max shelf life http://www.johansontechnology.com/recommended-storage-conditions rohs compliance http://www.johansontechnology.com/rohs-compliance ver. 3.0 application notes, layout files, and more http://www.johansontechnology.com/tape-reel-packaging soldering information www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/tuning antenna layout review, tuning, and characterization services http://www.johansontechnology.com/ipc-antenna-services high frequency ceramic solutions
|