datasheet datasheet 10/1 gigabit ethernet multi-function media module EM316-10G8SW-XY overview fiber grooming (media conversion and fber optimization) incorporates a wide variety of data transmission functions traditionally implemented through multiple independent solutions. the fiber driver xy (multi-dimensional) modules combine fber grooming and distance extension into multi-function modules. the 10/1 gigabit ethernet multi-function media module (10g8sw-xy) is an extremely versatile transponder and converter for the fiber driver optical multi-service platform. the 10g8sw-xy module includes eight sfp ports supporting gigabit ethernet and two xfp ports for 10-gigabit ethernet. this fexible design with modular optics allows a single module to serve many applications through simple component and software confgurations: 1. mixed-speed gigabit ethernet switch C gigabit/10 gigabit 1. ethernet switching with collision domain isolation 2. gigabit ethernet packet multiplexing C gigabit ethernet mux/ 2. demux combines and separates eight 1-gigabit ethernet links 2. over redundant 10-gigabit ethernet links 3. multi-co C manage eight em316eusm cpe devices with aggregation to a 10 gbps trunk 1 sfp/xfp benefts sfp support for gigabit ethernet optical or copper and for multi-rate optical transceivers optical performance monitoring through sfp digital diagnostics p7 rx tx p8 tx rx p5 rx tx p6 tx rx p3 rx tx p4 tx rx p1 rx tx p2 tx rx p8 sp rnm pwr 1 rx tx 2 rx tx t r u n k p o r t p7 dd sp dd sp dd p6 p5 sp dd p4 p3 sp dd p2 p1 sp dd mixed-speed gigabit ethernet switch p7 rx tx p8 tx rx p5 rx tx p6 tx rx p3 rx tx p4 tx rx p1 rx tx p2 tx rx p8 sp rnm pwr 1 rx tx 2 rx tx t r u n k p o r t p7 dd sp dd sp dd p6 p5 sp dd p4 p3 sp dd p2 p1 sp dd p7 rx tx p8 tx rx p5 rx tx p6 tx rx p3 rx tx p4 tx rx p1 rx tx p2 tx rx p8 sp rnm pwr 1 rx tx 2 rx tx t r u n k p o r t p7 dd sp dd sp dd p6 p5 sp dd p4 p3 sp dd p2 p1 sp dd redundant link gigabit ethernet packet multiplexer p7 rx tx p8 tx rx p5 rx tx p6 tx rx p3 rx tx p4 tx rx p1 rx tx p2 tx rx p8 sp rnm pwr 1 rx tx 2 rx tx t r u n k p o r t p7 dd sp dd sp dd p6 p5 sp dd p4 p3 sp dd p2 p1 sp dd 10g upstream alternate 10g upstream co devices em316eusm cpe devices 1 8 pwr/nms lnk/act fdx dd sp tx rx dd sp tx rx rnm spd p1 p2 p3 dd sp tx rx pwr/nms lnk/act fdx dd sp tx rx dd sp tx rx rnm spd p1 p2 p3 dd sp tx rx multi-co 10g 1 2 3 highlights selectable functions in one module including: - - mixed-speed gigabit ethernet switch - - gigabit ethernet packet multiplexer - - multi-co mode to control eight eusm cpes dual xfp interfaces supporting lan phy or wan phy jumbo packet support (9600 bytes) manual confguration for - - port loopback and enable/disable - - sfp port auto-negotiation mixed-speed gigabit ethernet switch - - speed-matching (10/100/1000 mbps ethernet) - - manual confguration for fow control gigabit ethernet packet multiplexer mode - - low latency - - link integrity notifcation (lin) multi-co application - - manages eight eusm remote demarcations (cpes) - - 802.3ah remote management with mrv extensions - - transparent trafc aggregation to 10g lan/wan - -- phy optical link (oam and fow control) - - unmanaged link support full performance monitoring (64-bits counters) 3-slot module fts into the 3-slot (3v) and 16-slot fiber driver chassis hot-swap support for maintenance without afecting other modules in the same chassis management by command line, snmp, or graphical interface through lnxnm
datasheet datasheet the versatile xy (multi-dimensional) converter family simplifes network planning and installations while reducing replacement inventory requirements. this fiber driver module can fll the roles of multiple legacy network components, with sfp and xfp options multiplying the possible applications still further. the sfp interfaces support connections to many media types: - - single or dual fber 1000base-x - - multi-mode (mm) or mm extended (mmx) - - single-mode at 1310 nm or 1550 nm (up to 120 km) - - coarse and dense wave division multiplexing - copper 1000base-t or 10/100/1000 base-t (for sgmii host interfaces) the modular xfp interfaces support 10-gigabit ethernet lan phy or wan phy connections. xfps available from mrv include solutions for: - - multi-mode (mm) or mm extended (mmx) - - single-mode at 1310 nm or 1550 nm (up to 120 km) - - coarse and dense wave division multiplexing most available sfp and xfp transceivers use msa-compliant digital diagnostics to provide advanced optical performance monitoring for proactive network administration and maintenance. the small form-factor is also designed for portability and interoperability, so inventory costs and downtime may be reduced with fewer spare parts shared between many systems. the 10g8sw-xy module supports jumbo packets up to 9600 bytes in compliance with internetworking protocols including mpls over ethernet, q-in-q (vlan stacking), mac-in-mac, and others. applications the fexible architecture of the 10g8sw-xy module is designed to support the applications described below: mixed-speed gigabit ethernet switch in this mode, the module acts as a mixed-speed ethernet switch with eight sfp ports for 1000base-x interfaces and two xfp ports for 10g ethernet interfaces. the mixed-speed ethernet switch adds or drops gigabit ethernet trafc to or from a linear 10-gigabit ethernet fber-optic network. 2 5 6 7 8 servers workstations 1 2 3 4 5 6 7 8
datasheet datasheet 3 gigabit ethernet packet multiplexer in this mode, the module acts as an ethernet packet multiplexer at each end of the redundant trunk link. it combines eight gigabit ethernet links over a redundant 10-gigabit ethernet link. by mapping the eight 1-gigabit ethernet ports to a 10-gigabit ethernet link, the module optimizes the fber usage and can reclaim some existing fber for new services. 5 6 7 8 location 1 5 6 7 8 location 2 10 gbps redundant link 10 gbps link 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 multi-co 10g in this mode, a single 10g upstream link aggregates 1 gbps ethernet links from up to eight em316eusm cpes or unmanaged ethernet devices. 5 6 7 8 em316eusm cpe devices 2 1 3 4 5 6 7 8 carrier network 10g alternate active
datasheet datasheet mrv-fd-10g8swxy-062810 copyright ?2011 mrv communications, inc. all rights reserved. 3020113 -001 rev. a3 mrv has more than 50 ofces throughout the world. addresses, phone numbers and fax numbers are listed at www.mrv.com. please e-mail us at info@mrv.com or call us for assistance. mrv los angeles mrv boston mrv international 20415 nordhof street 300 apollo drive business park moerfelden chatsworth, ca 91311 chelmsford, ma 01824 waldeckerstrasse 13 800-338-5316 800-338-5316 64546 moerfelden-walldorf 818-773-0900 978-674-6800 germany tel. (49) 6105/2070 fax (49) 6105/207-100 all statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. please contact mrv communications for more information. mrv communications and the mrv communications logo are trademarks of mrv communications, inc. other trademarks are the property of their respective holders. model function protocol connectors EM316-10G8SW-XY gigabit/10-gigabit ethernet multi-function media module 1000base-x 10-gigabit ethernet lan wan phy sfp (x8) / xfp (x2) ordering info physical specifcations operating temperature 0c to 50c (32f to 122f) storage temperature -40c to 70c (-40f to 158f) relative humidity 85% maximum, non-condensing physical dimensions 75 mm x 75 mm x 175 mm (3 x 3 x 7 ) weight 531 g (18.7 oz) power requirement 25 watts regulatory compliance fcc part 15, class a; ic, class a; emc directive: emission (class a) and immunity; weee directive: wheelie bin mark; rohs directive; china rohs
|
