DCH5 series 5 watts total power: 5 watts input voltage: 100 - 240 vac # of outputs: single special features ? usb switching wallmount power supply ? universal ac input ? available in various country ac plugs ? ce mark emc & lvd & erp 2011 ? regulated output ? overload and short circuit protection ? constant voltage, constant current ? energy star effciency level v ? eup compliant ? built in emi flter (cispr 22 class b) ? cable less with - usb-a receptacle safety ? ul + cul 60950-1 ? tuv 60950-1 ? nemko 60950-1 ? nsw 60950-1 ? c-tick 60950-1 ? ce emc & lvd & erp 2011 for eu & uk versions electrical specifcations input input range: 100 - 240 vac (wide range) frequency: 47 - 63 hz emi/rfi: fcc part 15, subpart b class b & en55022 (cispr 22) class b & emc safety ground leakage current: 20 a @ 60 hz, 264 vac input output voltage (vo): 5 v (4.75 - 5.25 v) maximum power (po): 5 w hold-up time: 10 ms. typical at full load @ 115 vac/60 hz overvoltage protection: 7 v max. latching type overload protection: output short circuit protection auto recover overload protected 110 - 150% above maximum rating output: usb type a receptacle connector pinout: pin 1: +v, pin 2 and pin 3 connected together pin 4: ground data sheet environmental specifcations operating temperature: 0 to 40 c ambient storage temperature: -20 c to +70 c electromagnetic susceptibility: designed to meet en55082-1 humidity: operating; non-condensing 20% to 90% rh vibration: per iec 60068-2-6 DCH5-050us DCH5-050eu DCH5-050uk DCH5-050au power
DCH5 series data sheet ordering information model number maximum power output voltage minimum load maximum load ripple p/p (pard) 1 connector DCH5-050us 5 w 5 v 0 1 a 200 mv usb-a DCH5-050eu 5 w 5 v 0 1 a 200 mv usb-a DCH5-050uk 5 w 5 v 0 1 a 200 mv usb-a DCH5-050au 5 w 5 v 0 1 a 200 mv usb-a 1. peak-to-peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 2. output should not be grounded for emi purpose. mechanical drawing 1.88? (47.87) 1.0? (25.53) 1.4? (35.55) DCH5-050us DCH5-050eu 0.72? (18.3) 1.88? (47.87) 1.4? (35.55) 1.0? (25.53)
DCH5 series data sheet mechanical drawing DCH5-050uk 1.88? (47.87) 0.3? (7.75) 1.0? (25.53) 1.4? (35.55) 1.95? (49.53) 1.74? (44.2) DCH5-050au 1.88? (47.87) 0.35? (9) 1.4? (35.55) 1.0? (25.53) 1.63? (41.3)
DCH5 series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com while every precaution has been taken to ensure accuracy and completeness in this literature, artesyn embedded technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2014 artesyn embedded technologies, inc. www.artesyn.com DCH5 series-ds 06.06.14 pin assignments notes: 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is .02. 3. warranty: 2 years 4. weight: 0.144 lb./0.066kg. pin 1 (vo ut) pin 4 (grou nd ) 1 2 3 4 p in numb ers c o n nec ted t o gether
|
