preliminary specification of coaxial connector written by : t. kuriyama preliminary spec no. : nmm04-pv0001a checked by : h. aoki part number : MM8030-2600B/rj3 /rk0 date : 10 /jun./2008 1/2 specification revised b: 1/sep./?08 er , revised a: 20/ aug./?08 ky 1. part number b>a> part number packaging quantity remarks MM8030-2600B bulk package mm8030-2600rj3 178mm dia. reel 3000pcs/reel esd protection mm8030-2600rk0 330mm dia. reel 10000pcs/reel esd protection 2. mechanical figure1. construction 3. rating : item specification voltage rating 250v r.m.s. maximum nominal frequency range dc to 11ghz nominal impedance 50 power rating 2w temperature rating -40 to +85 insulation resistance 500 m minimum withstanding voltage no evidence of break down in ac300+/-20vr.m.s, 1minute initial contact resistance (without conductor resistance) 70m max. voltage standing wave ratio (v.s.w.r.) 1.2 max. (dc to 3ghz) 1.3 max. (3ghz to 6ghz) 1.5max. (6ghz to 11ghz) insertion loss 0.1dbmax. (dc to 3ghz) 0.2dbmax.(3ghz to 6ghz) 0.5dbmax. (6ghz to 11ghz) isolation 20dbmin.(dc to 3ghz) 15dbmin.(3ghz to 6ghz) 10dbmin. (6ghz to 11ghz) durability 100 cycles scale: free tolerances unless otherwise specified: +/-0.2 unit: mm 2.1 d i a . 0 . 5 2 2 dia. 1.35 0.9 0.45 0.9+/-0.1 1.8 0.9 0.25 1.8 0.18 0.15 1.02 0.38 signal in signal out probe signal in probe signal out signal in circuit diagram
preliminary specification of coaxial connector written by : t. kuriyama preliminary spec no. : nmm04-pv0001a checked by : h. aoki part number : MM8030-2600B/rj3 /rk0 date : 10 /jun./2008 2/2 4. standard pattern dimension a> (note) ? the material of pwb is the epoxy resin of glass fabric base. ( r=4.8). thickness is 1.0mm. ? the solder resist should be printed ex cept for the land pattern on the pwb figure2. standard pattern dimensions figure3. standard stencil mask pattern 0.5 0.9 1.36 2.3 0.64 1.1 1.5 2.3 2.76 4.5 1.74 (1.5) (1.5) land (gold plating) land (electrode) 2.3 1.3 0.35 2.3 1.6 1
|
