EFRP-S2207HPM 1u 200w redundant network power features: 1u slim (erp1u) form factor 200w with atx outputs max. 85% power efficiency pmbus support 1+1 redundancy / load sharing general specification input range : 100 to 240 vac, +/ 10% power factor: 0.95 minimum efficiency: 80% @ 115vac hold up time: 16ms @ 80% load short circuit protection over current protection over voltage protection no load operation over temperature protection mtbf >100,000 hours@25 operating temperature: 0 to 50 operating humidity: 20 to 90 % emi/rfi: ce, fcc class b safety: ul, cb, tuv, ccc, bsmi i nput and output characteristics input voltage frequency current 100~240 vac 47~63hz 3~1.5a note: 1: the +3.3 &+5 volt total outputs shall not exceed 120w. 2: noise bandwidth is from dc to 20 mhz ripple and noise output load regulation line regulation ripple & noise network power 10% nput and output characteristics output load +3.3v +5v +12v 12v max.load 20a 20a 16a 0.5 a min.load 0.5a 0.5a 0.8a 0a 1: the +3.3 &+5 volt total outputs shall not exceed 120w. 2: noise bandwidth is from dc to 20 mhz +3.3v +5v +12v 12v 5% 5% 5% 5% 1% 1% 1% 1% 60mv 60mv 120mv 120mv 12v 5v +5vsb a 2a 0a 5vsb 5% 1% 60mv
mechanical outline dimension: 106x41.5x260(mm) outline drawing ?etasis electronic corporation. all rights reserved . etasis electronics corporation reserves the right to make changes to their products, specification, or to discontinue any prod uct and its service at anytime without notice. the information and specification from etasis is believed to be accurate and reliable. how ever, etasis assumes no responsibility for any busi ness loss due to specification changes. etasis products are not designed to be use d in system deemed to be critical, or in any system wherein failure or malfunction could result in injury or death.
|
