Part Number Hot Search : 
IRL540 P251D OMT651S LM290 150N1T ATMEGA3 BDP951 KSMT170P
Product Description
Full Text Search
 

To Download B13JJHCF Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  a20 general specifcations electrical capacity (resistive load) logic level: 0.4va maximum @ 28v ac/dc maximum (applicable range 0.1ma ~ 0.1a @ 20mv ~ 28v) note: find additional explanation of operating range in supplement section. other ratings contact resistance: 50 milliohms maximum insulation resistance: 500 megohms minimum @ 500v dc dielectric strength: 500v ac minimum for 1 minute minimum mechanical life: 100,000 operations minimum electrical life: 50,000 operations minimum nominal operating force: 1.18n contact timing: nonshorting (break-before-make) angle of throw: 26 materials & finishes actuator: polyamide bushing housing: polyamide case housing: glass fber reinforced polyamide support bracket: phosphor bronze with tin plating movable contact: phosphor bronze with gold plating stationary contacts: brass with tin plating terminals: brass with gold plating environmental data operating temperature range: C25c through +55c (C13f through +131f) humidity: 90 ~ 95% humidity for 240 hours @ 40c (104f) vibration: 10 ~ 55hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours shock: 50g (490m/s 2 ) acceleration (tested in 3 right angled directions, with 5 shocks in each direction) pcb processing soldering: wave soldering recommended. see profle a in supplement section. manual soldering: see profle a in supplement section. cleaning: automated alcohol based cleaning recommended, 5 minutes maximum. do not use high-purity alcohol (50% alcohol or more) or organic solvent. high alcohol solution can damage clear plastic. see cleaning specifcations in supplement section. standards & certifications the b series illuminated toggles have not been tested for ul recognition or csa certifcation. these switches are designed for use in a low-voltage, low-current, logic-level circuit. when used as intended in a logic-level circuit, the results do not produce hazardous energy. series b subminiature fully illuminated toggles www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt a toggles
a21 distinctive characteristics led provides maximum illumination to bushing and actuator, indicating actuator status in highly visible green, red, or amber for single color or red/green for bicolor. (patent pending.) totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. molded-in, epoxy sealed terminals lock out fux and other contaminants. award-winning stc contact mechanism with benefts unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (additional stc details in terms & acronyms; see supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard pc board grid spacing. actual size series b subminiature fully illuminated toggles www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable a toggles rockers touch tilt
a22 poles 1 spdt typical switch ordering example 1 p b 2 description for typical ordering example b12jjpc j c bushing j clear j actuator j clear spdt on-none-on circuit clear toggle & bushing with red led straight pc terminals pc terminals p straight h right angle v vertical circuits 2 on none on combines with single color or bicolor leds 3 on off on combines with bicolor led only leds single color c red d amber f green on-none-on only bicolor cf red/green on-none-on & on-off-on actuator & bushing j clear toggle j clear bushing 26 (1.9) dia .075 (3.5) .138 (6.3) .248 toggle position connected terminals throw & schematics pole throw model up center down up center down spdt b12 b13 on on none off on on 2-3 2-3 none open 2-1 2-1 pole & circuits slot slot note: terminal numbers are not actually on the switch. led circuit is isolated and requires an external power source. single color bicolor (5) (4) red (6) green (5) (6) 2 (com) 1 3 series b subminiature fully illuminated toggles www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt a toggles
a23 pc terminals straight right angle with bracket p h vertical with bracket v typical switch dimensions terminal 4 is a support pin on single color models. b12jjpc terminal 4 is a support pin on single color models. B13JJHCF terminal 4 is a support pin on single color models. b13jjvcf 6 4 52 3 1 (2.54) ty p .100 (0.8) dia ty p .031 (5.08) .200 (5.08) .200 (0.8) dia ty p .031 6 4 52 3 1 (2.54) ty p .100 (5.08) .200 (6.0) dia .236 slot (8.8) .346 26 (1.9) dia .075 (0.6) dia ty p .024 (2.54) ty p .100 (3.1) .122 (13.1) .516 (6.3) .248 (3.5) .138 (0.8) .031 (8.8) .346 (5.08) .200 1 2 3 4 5 6 (0.6) dia ty p .024 (2.54) ty p .100 (8.8) .346 32 1 4 5 6 (16.42) .646 (3.1) .122 (0.5) .020 (2.54) .100 (1.9) dia .075 (2.7) .106 (0.4) .016 (5.08) .200 (6.3) .248 slot (0.6) ty p .024 (6.0) dia .236 (5.08) .200 (8.8) .346 (0.6) dia ty p .024 (5.08) .200 (8.8) .346 1 2 6 4 5 3 (18.96) .746 (3.1) .122 (0.5) ty p .020 (2.54) ty p .100 (2.7) .106 (0.4) .016 (5.08) .200 (6.3) .248 26 (1.9) dia .075 (0.6) ty p .024 (6.0) dia .236 (5.08) .200 (8.8) .346 slot 26 1 4 6 3 (2.54) .100 (0.8) dia ty p .031 (2.54) ty p .100 (5.08) .200 5 2 straight pc right angle pc vertical pc led colors & specifications single color bicolor red amber green red/green maximum forward current i fm 30ma 30ma 25ma 30ma/25ma typical forward current i f 20ma 20ma 20ma 20ma/20ma forward voltage v f 1.95v 2.0v 3.3v 1.95 v/3.3v maximum reverse voltage v rm 5v 5v 5v 5v/5v current reduction rate above 25c ?i f 0.40ma/c 0.33ma/c 0.40ma/c/0.33ma/c ambient temperature range C25c ~ +55c d cf f c leds are an integral part of the switch and not available separately. the electrical specifcations shown are determined at a basic temperature of 25c. if the source volt - age exceeds the rated voltage, a ballast resistor is required. the resistor value can be calculated by using the formula in the supplement section. colors series b subminiature fully illuminated toggles www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable a toggles rockers touch tilt


▲Up To Search▲   

 
Price & Availability of B13JJHCF

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X