pts at www.vishay.com vishay beyschlag revision: 08-dec-15 1 document number: 28899 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 platinum smd flat chip temperature sensor pts at smd flat chip temperature sensors are the perfect choice for temperature contro l of electronics operating under varying environmental conditions. the highly controlled platinum thin film manufacturing process guarantees an outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. typical applications include automotive, aviation and industrial electronics. features ? standardized characteristics according to iec 60751 ? aec-q200 qualified ? short reaction times down to t 0.9 3 s (in air) ? outstanding stability of temperature characteristic ? superior temperature cycling robustness ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications temperature measurement and control in ? automotive electronics ? aviation electronics ? industrial electronics notes (1) indicated measurement currents can be applied continuously with self-hea ting effect of less then 0.1 c. (2) valid for sensor element only. technical specifications description pts0603m pts0805m pts1206m resistance values r 0 at 0 c 100 100 , 500 100 , 500 , 1000 temperature coefficient (0 c to +100 c) +3850 ppm/k tolerance classes f0.3, f0.6 temperature range - 55 c to +175 c long term stability | r 0 / r 0 |; r 0 change after 1000 h at +155 c 0.1 % insulation resistance > 10 m measurement current i meas. (dc) (1) 100 0.1 ma to 0.50 ma 0.1 ma to 1.0 ma 0.1 ma to 1.0 ma 500 - 0.1 ma to 0.40 ma 0.1 ma to 0.40 ma 1000 - - 0.1 ma to 0.25 ma self-heating at 0 c (2) calm air ( v = 0.0 m/s) 0.9 k/mw 0.8 k/mw 0.7 k/mw thermal response time (2) flowing water ( v = 0.4 m/s) t 0.5 0.1 s t 0.5 0.2 s t 0.5 0.3 s t 0.9 0.2 s t 0.9 0.3 s t 0.9 0.4 s flowing air ( v = 3.0 m/s) t 0.5 1.0 s t 0.5 1.5 s t 0.5 2.0 s t 0.9 2.0 s t 0.9 3.0 s t 0.9 5.0 s
pts at www.vishay.com vishay beyschlag revision: 08-dec-15 2 document number: 28899 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters solder pad dimensions in millimeters description a homogeneous film of plati num is deposited on a high grade (ai 2 o 3 ) ceramic substrate and conditioned to achieve the correct temperature coef ficient and stability. the sensor-elements are covere d by a protective coating designed for electrical, mechanical and climatic protection. the terminations receive a fina l pure matte tin on nickel plating, the immunity against tin whisker growth has been proven under extensive testing. quality the result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual sensors. only accepted products are laid dire ctly into the paper tape in accordance with iec 60286-3. storage solderability is specified for 2 years after production or re-qualification. the permitted storage time is 20 years. assembly the pt-sensors are suitable for processing on automatic smd assembly systems. they are suitable for automatic soldering using wave, reflow or vapour phase as shown in iec61760-1. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. the use of potting resins in close contact with the protective coating or terminations is not recommended. for frequent high temperature usage, thermal compatible substrates and solder alloys shou ld be selected to minimize any thermal mismatch. all products comply with the cefic-eeca-eicta list of legal restrictions on hazardous substances. this includes full compatibility with the following directives: ? 2000/53/ec end of life vehicle directive (elv) and annex ii (elv ii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) approvals the pt-sensors are tested in accordance with ? iec 60751 ? iec 60068 series the pt-sensors are qualified according to aec-q200. dimensions and mass type h l w w t t t t b mass (mg) pts 0603 0.45 + 0.1/- 0.05 1.55 +0.05 / -0.1 0.85 0.1 > 75 % of w 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 pts 0805 0.45 + 0.1 / - 0.05 2.0 0.1 1.25 0.15 > 75 % of w 0.4 0.2 0.4 0.2 4.6 pts 1206 0.55 0.1 3.1 + 0.1 / - 0.2 1.6 0.15 > 75 % of w 0.5 0.25 0.5 0.25 9.2 recommended solderpad dimensions type wave soldering reflow soldering gyxzgyxz pts 0603 0.55 1.1 1.1 2.75 0.65 0.7 0.95 2.05 pts 0805 0.8 1.25 1.50 3.2 0.9 0.9 1.4 2.7 pts 1206 1.4 1.5 1.9 4.4 1.5 1.15 1.75 3.8 t b t t l h w w t g x y z
pts at www.vishay.com vishay beyschlag revision: 08-dec-15 3 document number: 28899 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) products can be ordered using either the part number or the product description. (2) the part number is shown to facilitate the intr oduction of a unified part numbering system. (3) please refer to table packaging. (4) we recommend that the production description is used to minimize the possibility of errors in order handling. part number and product description (1) part number (2) : pts0805m1b500rp100 type size code version tolerance class resistance value packaging (3) special 3 digits 4 digits 1 digit 2 di gits 4 digits 2 digits 2 digits pts = platinum temperature sensor smd 0603 0805 1206 m = at (automotive) 1b = class f0.3 2b = class f0.6 100r = 100 500r = 500 1k00 = 1000 pu p1 00 = standard product description (4) : pts 0805-b at p1 500r pts 0805 -b at p1 500r type size code tolerance class version packaging (3) resistance value pts = platinum temperature sensor smd 0603 0805 1206 b = class f0.3 2b = class f0.6 at = automotive pu p1 100r = 100 500r = 500 1k = 1000 packaging type code quantity carrier tape width pitch box/reel box/reel diameter pts 0603 pts 0805 pts 1206 pu 100 paper tape acc. iec 60286-3 8 mm 4 mm box 114 mm p1 1000 reel 180 mm/7" tests and requirements test conditions requirements | r 0 / r 0 | high temperature expo sure (storage) aec-q200, 1000 h at 155 c 0.1 % high temperature exposure (storage) 1000 h at 175 c 0.2 % temperature cycling aec-q200, 1000 cycles -55 c to +155 c 0.5 % biased humidity 1000 h, 1 ma bi ased at 85 c / 85 % rh 0.5 % operational life 1000 h, 1 ma biased at 125 c 0.2 % vibration mil-std 202, method 204 0.1 % mechanical shock mil-std 202, method 213 0.1 % resistance to solderin g heat solder bath dipping 10 s at 260c 0.25 % esd aec-q200, hbm (cd) 1.0 kv (0603) , 1.5 kv (0805), 2.0 kv (1206) 0.5 % board flex aec-q200-005, 2 mm during 60 s 0.2 % terminal strength aec-q200-006, shear test 10 n / 17.7 n during 60 s 0.25 % 08 s t p051b500rp100 m
pts at www.vishay.com vishay beyschlag revision: 08-dec-15 4 document number: 28899 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance the temperature resistance relationship s of the pts series follow different equations: for the temperature range of -55 c up to 0 c: r t = r 0 x (1 + a x t + b x t 2 + c x ( t - 100 c) x t 3 ) and for the temperature rang e of 0 c up to +175 c: r t = r 0 x (1 + a x t + b x t 2 ) r t : resistance as a function of temperature r 0 : nominal resistance value at 0 c t : temperature in c according to iec 60751 the values of the coefficients are: a = 3.9083 x 10 -3 c -1 b = -5.775 x 10 -7 c -2 c = -4.183 x 10 -12 c -4 the tolerances values of the pts series are classified by the following equations as specified by iec 60751: class f0.3 : t f0.3 = (0.3 + 0.005 x | t |) class f0.6 : t f0.6 = (0.6 + 0.010 x | t |) nominal resistance value temperature in c nominal resistance in tolerance in k r 0 = 100 r 0 = 500 r 0 = 1000 class f0.3 class f0.6 -55 78.319 391.59 783.19 0.58 1.15 -50 80.306 401.53 803.06 0.55 1.10 -25 90.192 450.96 901.92 0.43 0.85 0 100.00 500.00 1000.00 0.30 0.60 25 109.73 548.67 1097.35 0.43 0.85 50 119.40 596.99 1193.97 0.55 1.10 75 128.99 644.94 1289.87 0.68 1.35 100 138.51 692.53 1385.06 0.80 1.60 125 147.95 739.76 1479.51 0.93 1.85 150 157.33 786.63 1573.25 1.05 2.10 175 166.63 833.13 1666.27 1.18 2.35 - 75 0 175 temperature in c - 50 - 25 25 50 75 100 125 150 r t / r 0 ratio r t / r 0 0.7 0.8 1.0 1.2 1.4 1.6 1.7 0.9 1.1 1.3 1.5 - 75 0 175 temperature tol. in c temperature in c - 50 - 25 25 50 75 100 125 150 0.0 0.2 2.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.4 tolerances for classf0.3 and f0.6 r 0 tol. in % 0.0 0.1 1.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.2 f0.6 temp. tol. f0.6 r 0 tol. f0.3 r 0 tol. f0.3 temp. tol.
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
