universal ac input protections:short circuit/over load/over voltage low leakage current <0.5ma cooling by free air convention fixed switching frequency at 65khz model number output volts output amps ovp min load dc volt adjust load reg effciency single output ps45-3.3 3.3 volts(dc) 8 amps 3.8 ~ 4.46volt(dc) 0~10.7amps 3.14~3.63volt(dc) 3.0% 69% ps45-5 5 volts(dc) 8 amps 5.75 ~ 6.75volt(dc) 0~10.5amps 4.75~5.5volt(dc) 3.0% 74% ps45-7.5 7.5 volts(dc) 5.4 amps 8.63 ~ 10.1volt(dc) 0~7amps 7.13~8.25volt(dc) 3.0% 75% PS45-12 12 volts(dc) 3.7amps 13.8 ~ 16.2volt(dc) 0~4.4amps 11.4~13.2volt(dc 2.0% 76% ps45-13.5 13.5 volts(dc) 3.3 amps 15.5 ~ 18.2volt(dc) 0~3.9amps 12.8~14.85volt(dc) 2.0% 77% ps45-15 15 volts(dc) 3.0 amps 17.25 ~ 20.25volt(dc) 0~3.5amps 14.25~16.5volt(dc) 2.0% 77% ps45-24 24 volts(dc) 1.9 amps 27.6 ~ 32.4volt(dc) 0~2.2amps 22.8~26.4volt(dc) 2.0% 78% ps45-27 27 volts(dc) 1.7 amps 31~ 36.45volt(dc) 0~1.95amps 25.65~29.7volt(dc) 2.0% 78% ps45-48 48 volts(dc) 1.0 amps 55.2~ 64.8volt(dc) 0~1.1amps 45.6~52.8volt(dc) 2.0% 78% 45w single output switching power supply ps45 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90 ~ 264vac 127~370 volts(dc) frequency range 47-440hz inrush current, typ: (cold start) 15amps/115vac; 30amps/230vac input current 0.8 amps@115vac 0.56 amps@230vac leakage current < 0.75mamps / 240vac min load see selection chart output specifications voltage and current see selection chart line regulation 1.0% load regulation see selection chart voltage tolerance (note 2) 3.0%: 3.3~7.5volts(dc) 2.0%: 12~48volts(dc) ripple/noise (note 1) 80mvpk-pk: 3.3volts(dc) 100mvpk-pk: 5~48volts(dc) hold up time @ fl 60ms setup, rise time @ fl 800ms, 30ms over voltage protection see selection chart shut down o/p voltage,re-power over current protection 53~75w (3.3volts: 36~55w) rated output power hiccup mode, auto recover dc voltage adjust see selection chart general specifications safety ul60950, tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 effciency see selection chart isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2,3,4,5,6,8,11 env50204, env55024 light industry level, criteria a environmental specifications oper. temperature -10c to +60c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.05% / c (0-50c) mtbf 300.7khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size 127 x 76.2 x 28 mm (5x 3x 1.10) weight 7.48 oz (190g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. mounting holes m1 and m2 should be grounded for emi purposes. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 45w single output switching power supply ps45 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
45w single output switching power supply ps45 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
45w single output switching power supply ps45 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|