1 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products iec appliance inlet c14 or c18 with filter, circuit breaker ta45 (recessed) approvals and compliances c14 70 c c18 70 c description - panel mount : screw-on mounting from front side - 3 functions : appliance inlet protection class i or ii , circuit breaker type ta45 2-pole , line filter in standard and medical version - quick connect terminals 6.3 x 0.8 mm characteristics - all single elements are already wired - circuit breaker non-illuminated or illuminated - suitable for use in equipment according to iec/ul 60950 suitable for use in medical equipment according to iec/ul 60601-1 other versions on request - unwired versions - other rocker marking - medical version m80 - capacitance cx1 - variant with notch for v-lock mating cordsets references alternative: version without line filter df11 substitute for type 5145 alternative: standard version weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, detailed request for product, microsite technical data ratings iec 1 - 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 1 - 15 a @ ta 40 c / 250 vac; 60 hz leakage current standard < 0.5 ma (250 v / 60 hz) medical < 5 a (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation tempe - rature -10 c to 55 c climatic category 10/055/21 acc. to iec 60068-1 ip-protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class i or ii acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet c14 / c18 acc. to iec 60320-1 ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class i or ii circuit breakers acc. iec/en 60934, ul 1077, csa 22.2 no. 235 2-pole rocker switch, illuminated or non- illuminated. optional with undervoltage- or remote trip release short circuit capacity icn: at in < 3a/240vac : 10 x in at in 3a/240vac : 300a line filter standard and medical version, iec 60939, ul 1283, csa c22.2 no. 8 technical details mtbf > 100'000 h acc. to mil-hb-217 f approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals
2 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: df12 approval logo certificates certification body description vde approvals vde certificate number: 40012935 ul approvals ul ul file number: e72928 product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 60939 passive filters for suppressing electromagnetic interference designed according to iec 61058-1 switches for appliances. part 1. general requirements designed according to ul 498 standard for attachment plugs and receptacles designed according to ul 1283 electromagnetic interference filters designed according to csa c22.2 no. 42 general use receptacles, attachment plugs, and similar wiring devices designed according to csa c22.2 no. 8 electromagnetic interference (emi) filters application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. designed for applications acc. iec 60601-1 medical electrical equipment - part 1: general requirements for basic safety and essential performance compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. micrositev-lock schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. medical equipment schurter ag suitable for use in medical equipment according to iec/ul 60601-1
3 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products dimension [mm] screw-on version 76.2 2.8 41.2 10.6 5.3 9.7 47.2 36 29.4 29.8 10.15 9.2 74.3 0.8 21.1 9.7 37.1 33.5 28.7 92.5 82.5 5 9.65 73.2 r 4.7 r 2.8 3.3 6.4 r 6.5 r 3.75 30.8 75.5 3.5 82.5 ? 3.6 /m3 r 3.3 r 3.05 0.10 0.10 0.05 0.10 0.05 ? ? * --- version ta45 with undervoltage release technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m? ] 1 standard 2 x 11 100 2.2 1 2 standard 2 x 4 100 2.2 1 3 standard 2 x 2.5 100 2.2 1 4 standard 2 x 1.6 100 2.2 1 6 standard 2 x 0.7 100 2.2 1 8 standard 2 x 0.6 100 2.2 1 10 standard 2 x 0.4 100 2.2 1 15 standard 2 x 0.1 100 2.2 1 2 medical (m5) 2 x 4 100 - 1 3 medical (m5) 2 x 2.5 100 - 1 4 medical (m5) 2 x 1.6 100 - 1 6 medical (m5) 2 x 0.7 100 - 1 8 medical (m5) 2 x 0.6 100 - 1 10 medical (m5) 2 x 0.4 100 - 1 15 medical (m5) 2 x 0.1 100 - 1
4 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products diagrams standard version cx l1 l2 cy cy 2) l? pe? n? p1 p2 l pe n 1) ta 45 1) line 2) load medical version (m5) cx l1 l2 r 2) l? pe? n? p1 p2 l pe n 1) ta 45 1) line 2) load attenuation loss - - - - 5? ? 1 a 2 a 3 a 4 a 6 a 8 a 10 a 15 a medical version (m5) 1 a 2 a 3 a 4 a 6 a 8 a 10 a 15 a
5 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products abt w f 150 c0 colours switch fr ont rocker w black white ? b black black ? 6 black ? orange transp. f embossed / relief h printed / bedruckt white / weiss k printed / bedruckt black / schwarz l printed / bedruckt white / weiss surface illustration colour of print rocker legend l o on off on off l o m printed black p printed white r printed black surface illustration colour of print rated curr ent cir cuit br eaker of equipment without r elease: code c0 undervoltage r elease remote trip r elease ue za code rated voltage u n ? ? ? ? ? ? ? ? ? ? ? ? 2 3 4 240 v ac 230 v ac 120 v ac l o o i o i position of the r ocker legend e.g f i n code 0,1 j01 0,2 j02 0,3 j03 0,4 j04 0,5 j05 0,6 j06 0,7 j07 0,8 j08 0,9 j09 1,0 j10 1,1 j11 1,2 j12 i n code 1,3 j13 1,4 j14 1,5 j15 1,6 j16 1,7 j17 1,8 j18 1,9 j19 2,0 j20 2,1 j21 2,2 j22 2,3 j23 2,5 j25 i n code 2,8 j28 3,0 030 3,5 035 4,0 040 4,5 045 5,0 050 6,0 060 6,5 065 7,0 070 7,5 075 8,0 080 9,0 090 i n code 10,0 100 11,0 110 12,0 120 13,0 130 14,0 140 15,0 150 20,0 200 t able 1 selection for type t a45 or der example ? cir cuit br eaker of equipment ? 2-pole, r ocker actuated ? quick connect terminal other types on r equest w ithout illumination w ith illumination 220?240 v 110?120 v diagram thermal overload pr otection 1-pole 2-pole abt abd a12 a32 a14 a34 p2 p1 6 3 43 p2 p1 } p2 p1 u< p2 p1 b u< p2 p1 b a u< p2 p1 c
6 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products 10?000 60 2?000 1?000 500 200 100 50 20 10 5 2 1 0, 5 0, 3 0, 2 0, 1 [ sec ] [ min ] 10 5 1 30 20 1,05 [ x i n ] 10 8 5 4 3 2 1,32 ty p ta 45 nennstro mi > 3... < 15 a 1-polig geschtzt 2-polig geschtzt umgebungstemp. +23 c nennstr om-v ielfaches ausl?sezeit n 10?000 60 2000 1000 500 200 100 50 20 10 5 2 1 0, 5 0, 3 0, 2 0, 1 [ sec ] [ min ] 10 5 1 30 20 1,05 nennstr om-v ielfaches [ x i n ] 10 8 5 4 3 2 1,32 ausl?sezeit ty p t a45 nennstro m i n < 3 a 1-polig geschtzt 2-polig geschtzt umgebungstemp. +23 c t echnical data (continued) cir cuit br eaker tr ipping characteristics i n < 3 a tr ipping characteristics i n > _ 3? < _ 15 a ef fect of ambient temperatur e 1) the unit is calibrated for an ambient temperatu re of +23 c. to deter mine the rated curr ent for a lower or higher ambient tempera- tur e, use a corr ection factor fr om the table below . * ambient temperatur e [c] corr ection factor ?10 0,89 ? 5 0,91 0 0,92 +23 1,00 +30 1,03 +40 1,08 +55 1,16 1) example rated curr ent at +23 c 6,0 a ambient temperatur e +40 c corr ection factor 1,08 chosen rated curr ent at + 40 c ambient temperature 6 a x 1,08 = 6,5 a * t emperatur e must be measur ed at the re ar of the br eaker next to the terminals after equipment operating temperatur e has been reached. configuration code (example) optional va riants 00 standar d 21 v- lock notch colour 0 black mounting 0 sc re w mounting t erminal pe 0 without (pcii) 1 qc 6.3x0.8 t erminal l and n 1 qc 6.3x0.8, without connection to ta 45 3 connection to ta 45 non insulated t ype of mains filter / capacitor / bleed re sistor 1 standar d x2, y2 with bleed r esistor 3 medical m5 x2 with bleed r esistor rated curre nt 1) 1 1a 2 2a 3 3a 4 4a 5 6a 6 8a 7 10a 9 15a 1) the rated curr ent of the line-filter must be equal or mo re than the rated curr ent of ta 45 or der code ta 45 (2-pole rocker -switch without accessories) see table 1 t ype df12 - ABTWF150C0 - 000 - 1111 - 00 - 21 packaging unit 20 pcs
7 power entry modules with line filter df12 https://www.schurter.com /pg06 emc products accessories description assorted covers rear cover 0859.0109 mating outlets/connectors category / description appliance outlet overview complete iec appliance outlet f, screw-on mounting, front side, solder terminal 4787 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 4788 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 5091 appliance outlet further types to df12 connector overview complete 4782 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4782 4022 mounting: power supply cord, 3 x 1.5 mm2, screw clamps, connector: iec c13 4022 4785 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4785 4300-06 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4300-06 4012 mounting: power supply cord, 3 x 1.5 mm2, screw clamps, connector: iec c13 4012 connector further types to df12 ... mating outlets/connectors shuttered power cord overview complete vac13ks, overview, diverse connector iec c13, cord end: vac13ks power cord further types to df12 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017
|
