usb 3.1 gen 1 usb type-c (usb-c) to sata hard drive quick dock for 2.5 in. and 3.5 in. hdd and ssd model number: U439-001 description the U439-001 usb 3.1 gen 1 to sata hard drive quick dock allows you to quickly and easily add storage and transfer data to your computer, tablet, ultrabook, chromebook or laptop from a sata hard drive. just connect a 2.5-inch or 3.5-inch sata hdd (hard disk drive) or ssd (solid state drive) to the docks top port, connect the usb-c port to the usb-c port on your device using the included 3-foot cable, connect the external power supply to the dock and an ac power source, and turn on the rear on/off switch. a blue led will indicate a solid connection with your device. the dock accepts sata iii (6 gbps), sata ii (3 gbps) and sata i (1.5 gbps) drives, including 2.5-inch and 3.5-inch sata hdds and ssds of all capacities (tested up to 6 tb). it supports usb 3.1 gen 1 data transfer rates up to 5 gbps, and is backward compatible with previous usb generations. works right out of the package with no software or drivers required. compatible with all major operating systems that comply with usb standards. usb type-c? and usb-c? are trademarks of usb implementers forum features connect a sata hard drive to your electronic device ideal for adding external storage or transferring data to your computer, tablet, ultrabook, chromebook or laptop plug and playno software or drivers to download or install sata drive slides easily into convenient slot on/off button powers off sata drive when not in use led indicates when the unit is connected usb type-c cable included compliant with most applications highlights supports usb 3.1 gen 1 data transfer rates of 5 gbps works with sata hdd or ssd drives up to sata iii backward compatible with previous usb generations plug and playno software or drivers required includes 3 ft. usb type-c cable system requirements device with available usb type-c (usb-c) port (usb 3.1 port required to achieve usb 3.1 speeds) 2.5 in. or 3.5 in. sata hdd or ssd supports all major operating systems that comply with usb standards package includes U439-001 usb 3.1 gen 1 to sata hard drive quick dock usb type-c cable m/m, 3 ft. external power supply with nema 1-15p plug (input: 100C240v, 50/60 hz, 0.8a; output: 12v, 2a, 4.9 ft.) quick start guide 1 / 2
compliant with most applications accepts 2.5 in. and 3.5 in. sata iii (6 gbps), sata ii (3 gbps) and sata i (1.5 gbps) drives supports gen 1 data transfer rates up to 5 gbps backward compatible with previous usb generations works with both hdds (hard disk drive) and ssds (solid state drive) of all capacities (tested up to 6 tb) compatible with all major operating systems that comply with usb standards specifications overview ac adapter input: 100-240v, 50/60hz, 0.8a; output: 12v, 2a, 4.9 ft. input cable length (ft.) 3 cable length (m) 0.9 physical color black connections connector a usb c (male) connector b 22 pin sata + power (female) warranty product warranty period (worldwide) 1-year limited warranty ? 2016 tripp lite. all rights reserved. all product and company names are trademarks or registered trademarks of their respective holders. use of them does not imply any affiliation with or endorsement by them. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. tripp lite uses primary and third-party agencies to test its products for compliance with standards. see a list of tripp lite's testing agencies: http://www.tripplite.com/products/product-certification-agencies 2 / 2
|
