LRGB31492 ligitek electronics co.,ltd. property of ligitek only data sheet LRGB31492 a doc. no : qw0905- rev. : date : 28-aug.- 2015 triple color led lamps lead-free parts pb l dcc
note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 4 1 2 3 1.cathode red 2.common anode 3.cathodegreen 4.cathode blue ligitek electronics co.,ltd. property of ligitek only LRGB31492 package dimensions part no. page 1/5 0.5typ 3-2.54typ 2.55 4.1 7.8 2.8 2.6 0.6 18.0min
in/gan typical electrical & optical characteristics (ta=25 ? d nm luminous intensity @5ma(mcd) forward voltage @5ma(v) viewing angle 2
ligitek electronics co.,ltd. property of ligitek only typical electro-optical characteristics page 3/5 part no. LRGB31492 forward current vs.forward voltage maximum forward current vs. ambient temperature lighting angle 1.82.02.22.43.6 2.04.06.08.0 2.83.03.33.43.6 8.0 6.0 4.0 2.0
note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. dip soldering preheat: 120
description the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hours. this test intended to see soldering well performed or not. 1.t.sol=245
|
