street fire gm hei cap/rotor kit pn 5501 parts included: 1 - cap 1 - rotor installation 1. remove the cap and rotor. remove the coil cover to remove the coil. (note the position of the coil wires.) 2. install the new rotor bushing and rubber isolator. the spring of the rotor bush - ing must face up (figure 1). 3. install the coil. the terminals should slide easily into position into the cap. the yellow and red leads go in the outer slots of the cap. insert the black ground wire in the center slot of the cap and connect it to one of the coils retaining screws (figure 1). install the other three coil retaining screws 4. install the new rotor. make sure to position the aligning slot of the rotor to the tab on the rotor plate. 5. install the cap assembly and connect the factory wiring. figure 1 installation. coil cover coil insulator rotor bushing aligning slot rotor plate mounting tab street fire ? www.street-fire.com ? (915) 857-5200 ? fax (915) 857-3344 street fire gm hei cap/rotor kit pn 5501 parts included: 1 - cap 1 - rotor installation 1. remove the cap and rotor. remove the coil cover to remove the coil. (note the position of the coil wires.) 2. install the new rotor bushing and rubber isolator. the spring of the rotor bush - ing must face up (figure 1). 3. install the coil. the terminals should slide easily into position into the cap. the yellow and red leads go in the outer slots of the cap. insert the black ground wire in the center slot of the cap and connect it to one of the coils retaining screws (figure 1). install the other three coil retaining screws 4. install the new rotor. make sure to position the aligning slot of the rotor to the tab on the rotor plate. 5. install the cap assembly and connect the factory wiring. figure 1 installation. coil cover coil insulator rotor bushing aligning slot rotor plate mounting tab street fire ? www.street-fire.com ? (915) 857-5200 ? fax (915) 857-3344
street fire ? www.street-fire.com ? (915) 857-5200 ? fax (915) 857-3344 ? 2014 msd llc frm29490 revised 01/14 printed in u.s.a. limited warranty m sd warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized msd dealer, for a period of one year from the date of the original purchase. this warranty is void for any products purchased through auction websites. if found to be defective as mentioned above, it will be repaired or replaced at th e option of msd. any item that is covered under this warranty will be returned free of charge using ground shipping methods. this shall constitute the sole remedy of the purchaser and the sole liability of msd. to the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or ftness. in no event shall msd or its suppliers be liable for special or consequential damages. *intended normal use means that this item is being used as was originally intended and for the original application as sold by msd. any modifcations to this item or if it is used on an application other than what msd markets the product, the warranty will be void. it is the sole responsibility of the customer to determine that this item will work for the application they are intending. msd will acce pt no liability for custom applications. service in case of malfunction, this msd component will be repaired free of charge according to the terms of the warranty. when returning msd components for warranty service, proof of purchase must be supplied for verifcation. after the warranty period has expired, repair service is based on a minimum and maximum fee. all returns must have a return material authorization (rma) number issued to them before being returned. to obtain an rma number please contact msd customer service at 1 (888) msd-7859 or visit our website at www.msdperformance.com/rma to automatically obtain a number and shipping information. when returning the unit for repair, leave all wires at the length in which you have them installed. be sure to include a detailed account of any problems experienced, and what components and accessories are installed on the vehicle. the repaired unit will be returned as soon as possible using ground shipping methods (ground shipping is covered by warranty). for more information, call msd at (915) 855-7123. msd technicians are available from 7:00 a.m. to 5:00 p.m. monday - friday (mountain time). street fire ? www.street-fire.com ? (915) 857-5200 ? fax (915) 857-3344 ? 2014 msd llc frm29490 revised 01/14 printed in u.s.a. limited warranty m sd warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized msd dealer, for a period of one year from the date of the original purchase. this warranty is void for any products purchased through auction websites. if found to be defective as mentioned above, it will be repaired or replaced at th e option of msd. any item that is covered under this warranty will be returned free of charge using ground shipping methods. this shall constitute the sole remedy of the purchaser and the sole liability of msd. to the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or ftness. in no event shall msd or its suppliers be liable for special or consequential damages. *intended normal use means that this item is being used as was originally intended and for the original application as sold by msd. any modifcations to this item or if it is used on an application other than what msd markets the product, the warranty will be void. it is the sole responsibility of the customer to determine that this item will work for the application they are intending. msd will acce pt no liability for custom applications. service in case of malfunction, this msd component will be repaired free of charge according to the terms of the warranty. when returning msd components for warranty service, proof of purchase must be supplied for verifcation. after the warranty period has expired, repair service is based on a minimum and maximum fee. all returns must have a return material authorization (rma) number issued to them before being returned. to obtain an rma number please contact msd customer service at 1 (888) msd-7859 or visit our website at www.msdperformance.com/rma to automatically obtain a number and shipping information. when returning the unit for repair, leave all wires at the length in which you have them installed. be sure to include a detailed account of any problems experienced, and what components and accessories are installed on the vehicle. the repaired unit will be returned as soon as possible using ground shipping methods (ground shipping is covered by warranty). for more information, call msd at (915) 855-7123. msd technicians are available from 7:00 a.m. to 5:00 p.m. monday - friday (mountain time).
|
