notes: (unless otherwise specified) 1. all dimensions are in inches [mm]. 2. dimensions apply after finishing. 3. manufacture to be compliant with eu rohs directive. 4. safety break all sharp corners and edges .02 maximum. revisions rev a new frame; add heat shrink; 4/26/10 cj description date appv sheet 1 of 1 ldcfdcc_a scale: 2:1 title: size dwg. no. rev do not scale drawing angles: 1 tolerances: .020 [0.50]-.200 [5.00]= .008 [0.20] .200 [5.00]-1.200 [30.00]= .016 [0.40] 1.20 [30.0]-4.75 [120.0]= .024 [0.60] 4.75 [120.0]-12.40 [315.0]= .040 [1.0] drawn: engr: dt: dt: material: finish: projection: : this drawing contains proprietary information that is the sole property of connector city, and shall be treated as such. no disclosure or reproduction of this document is permitted, in whole or in part, without the express written permission of connector city or its designated agents. 159 ort lane merlin, or 97532 descripton material finish body pin insulaton nickel te?on gold te?on support gold brass spacer te?on te?on heat shrink black polyole?n brass be cu CONREVSMA011-R178 rp-sma female cable end crimp for rg178 cable cj 4/26/10 0.339 (8.60) ?0.049 (1.25) pin CONREVSMA011-R178 assembly instructions spacer support 0.197 (5.00) 0.571 (14.50) 0.252 (6.40) 0.122 (3.10) ?0.102 (2.60) 0.248 (6.30) 1/4-36uns-2b threads ?0.209 (5.30) 1. strip the cable to the recommended dimensions. 2. solder the support onto the braid. 3. place the spacer onto the center conductor. 4. solder or crimp the pin onto the center conductor. 5. insert the pin, center conductor, spacer, and support into the body until the top of the pin is even to end of the body. 6. crimp the tail of the body onto the support with a 0.093? hex crimp tool. side view heat shrink 0.787 (20.00) ?0.118 (3.00) 0.177 (4.50) 0.033 (0.85) recommended cable stripping dimensions 0.098 (2.50) rg-178 cable
|