1/5 chip resistor networks mnr series < not for automotive application > www.rohm.com c 2015 rohm co., ltd. all rights reserved. 2015.02 - rev.c da t asheet ? features 1) can be mounted even more dens ely than chip resistors. 2) convex electrodes secures visual in spection of fillets after soldering. 3) rohm resistors have obtained is o9001 / iso / ts16949 certification. part no. packing specification quantity / reel type code no. of terminals no. of elements paper tape (2mm pitch) paper tape (4mm pitch) 1005 4 1608 2 1608 4 1608 5 1605 8 mrap 10,000 5,000 eraperap errp erap mnr04mnr12 mnr14 mnr15 mnr18 1005 2 0402 4 0402 2 0603 2 0603 4 0603 5 0602 8 842 8 1016 4 44 8 8 2 mrap mnr02 (mm) size (inch) ? part number description mnr (chip resistor networks) resistance code, 3 or 4 digits.000 denotes jumper type. ex.) 1 = 1r0 ( 5% ) 9.1 = 9r1 ( 5% ) 10 = 10r0 ( 1% ) 100 ( 5% ) 1m = 1004 ( 1% ) 105 ( 5% ) 02 (1005 [0402] 2) 04 (1005 [0402] 4) 12 (1608 [0603] 2) 14 (1608 [0603] 4) 15 (1608 [0603] 5) 18 (1605 [0602] 8) f ( 1% ) j ( 5% ) (including jumper type) part no. size (mm [inch]) resistance tolerance nominal resistance type code 02 m ap r n mr j0 15 f j :: 4 digits3 digits resistance tolerance resistance code downloaded from: http:///
2/5 datasheet mnr series < not for automotive application > www.rohm.com c 2015 rohm co., ltd. all rights reserved. 2015.02 - rev.c ? products list ? design and specifications are subject to change without notice. carefully check the specification sheet supplied with the product before using or ordering it. mnr02 mrap mnr04 mrap 0.063 / element 25 jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) j( 5%) 2550 50 12.5 25 50 0.063 / element eraperap errp erap mnr12mnr14 mnr15 mnr18 0.063 / element0.063 / element 0.031 / element 0.063 / element + 500/ 300 200 1 to 9.1 10 to 910k j( 5%) f( 1%) j( 5%) f( 1%) j( 5%) j( 5%) 55 to + 155 55 to + 125 e24 200 200 500 10 to 1m 10 to 1m e24 e6 e24 e24 e24 200 56 to 100k 10 to 1m 250 200 200 2.2 to 6.8 10 to 1m 10 to 1m 200 j( 5%) 10 to 1m e24 limiting element voltage (v) maximum overload voltage (v) temperature coefficient (ppm / c ) resistance tolerance (%) operating temperature range ( c ) type code resistance range series part no. rated power (70 c) (w) ? circuit construction mnr02 / 12 mnr04 / 14 mnr15 mnr18 r1 r1 r2 r3 r1 r2 r3 r4 r5 r6 r7 r8 r2 r1 r3 r4 r5 r6 r7 r8 r4 r2 r1=r2=r3=r4 r1=r2 r1=r2=r3=r4=r5=r6=r7=r8 r1=r2=r3=r4=r5=r6=r7=r8 downloaded from: http:///
3/5 datasheet mnr series < not for automotive application > www.rohm.com c 2015 rohm co., ltd. all rights reserved. 2015.02 - rev.c 102 l a a a a aa a a p l p l p t t t w w ww c c c c t b2 b2 b1 b2 b1 103 103 l p b2 b1 mnr02 / 12 mnr04 / 14 mnr15 mnr18 ? chip resistor dimensions and markings there are three or four digi ts used for the calculation number according to iec code and ris used for the decimal point. part no. type code (mm) l w t a b1 b2 c p marking existence ? including jumper type (unit : mm) mnr02 mrap 1005 2 1.0 0.1 1.0 0.1 0.3 0.1 0.15 0.1 no mrap 1005 4 2.0 0.1 1.0 0.1 0.4 0.1 0.2 0.1 0.3 0.1 yes erap 1608 2 1.6 0.15 1.6 0.15 0.45 0.1 0.3 0.2 yes erap 1608 4 3.2 0.2 1.6 0.15 0.5 0.1 0.3 0.2 0.5 0.15 yes errp 1608 5 3.2 0.2 1.6 0.15 0.55 0.1 0.3 0.15 0.32 0.15 yes erap 1605 8 4.0 0.2 1.6 0.1 0.4 0.1 0.3 0.2 0.25 0.1 yes (inch) 0402 2 0402 4 0603 2 0603 4 0603 5 0602 8 0.33 0.1 0.6 0.15 0.67 0.50.8 0.64 0.5 0.8 0.25 0.1 0.25 0.2 0.3 0.2 0.3 0.15 0.3 0.2 0.3 0.2 mnr04mnr12 mnr14 mnr15 mnr18 ? land pattern example mnr02 / 12 mnr04 / 14 mnr15 mnr18 b e b eb b d p1 p2 p1 p1 p1 p2 p2 ca c d ca c d c a c d c a c p2 p1 b p1 land dimensions part no. type code a mnr02mnr04 mnr12 mnr14 mnr15 mnr18 mrap 0.5 mrap eraperap errp erap 0.51.0 1.0 1.0 1.0 b 0.35 to 0.4 0.4 0.4 to 0.60.4 to 0.6 0.48 0.3 c 0.50.5 0.7 to 0.80.7 to 0.8 0.7 to 0.8 0.7 to 0.8 p2 0.5 to 0.55 0.8 to 0.9 0.72 d 1.51.5 2.4 to 2.62.4 to 2.6 2.4 to 2.6 2.4 to 2.6 e 0.3 0.4 0.32 p1 0.65 to 0.7 0.5 0.8 to 1.0 0.8 0.64 0.5 (unit : mm) downloaded from: http:///
4/5 datasheet mnr series < not for automotive application > www.rohm.com c 2015 rohm co., ltd. all rights reserved. 2015.02 - rev.c ? derating curve when the ambient temperature ex ceeds 70c, power dissipation must be adjust ed according to the derating curves below. mnr02 / 04 / 12 / 14 0 20 40 60 80 100 55 0 70 100 155 ambient temperature ( c) percent rated power (%) mnr15 / 18 0 20 40 60 80 100 55 0 70 100 125 ambient temperature ( c) percent rated power (%) ? characteristics resistor type jumper type resistancevariation of resistance with temperature solderability damp heat, steady state endurance at 70 c endurance rapid change of temperature bend strength of the end face plating resistance to solvent resistance to soldering heat overload (2.0% + 0.1 ) max. 50m (1.0% + 0.05 ) (3.0% + 0.1 ) max. 50m max. 100m see "products list"see "products list" 20 c no remarkable abnormality on the appearance. a new uniform coating of minimum of95% of the surface being immersed and no soldering damage. without mechanical damage such as breaks. compliance standard(s) : iec60115 8 jisc 5201 8 measurement : + 20 / 55 / + 20 / + 125 c soldering condition : 260 5 c duration of immersion : 10 1s 40 c, 93%rh (relative humidity) test time : 1,000h to 1,048h (3.0% + 0.1 ) (3.0% + 0.1 ) (1.0% + 0.05 ) (1.0% + 0.05 ) (1.0% + 0.05 ) max. 100m max. 100m max. 50m max. 50m max. 50m 70 c rated voltage (current)1.5h : on 0.5h : off test time : 1,000h to 1,048h125 c (mnr15 / 18) 155 c (mnr02 / 04 / 12 / 14) test time : 1,000h to 1,048h 23 5 c , immersion cleaning, 5 0.5min solvent : 2 propanol test temp. : 55 c to + 125 c 5cycle rosinethanol : 25% (weight)soldering condition : 235 5 c duration of immersion : 2.0 0.5s rated voltage (current) 2.5, 2s. maximum overload voltage test items guaranteed value test conditions downloaded from: http:///
5/5 datasheet mnr series < not for automotive application > www.rohm.com c 2015 rohm co., ltd. all rights reserved. 2015.02 - rev.c ? tape dimensions 1.2 0.1 1.2 0.1 1.2 0.1 2.2 0.1 1.9 0.1 1.9 0.1 1.9 0.1 3.45 0.1 1.9 0.1 3.5 0.2 1.9 0.2 4.3 0.2 w type code part no. f e a 0 b 0 8.0 0.3 3.5 0.05 1.75 0.1 8.0 0.3 3.5 0.05 1.75 0.1 8.0 0.3 3.5 0.05 1.75 0.1 8.0 0.3 3.5 0.05 1.75 0.1 8.0 0.3 3.5 0.05 1.75 0.1 12.0 0.2 5.5 0.05 1.75 0.1 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 2.0 0.05 max 0.5 2.0 0.05 max 1.1 2.0 0.05 2.0 0.05 2.0 0.05 2.0 0.05 max 1.1max 1.1 max 1.1 max 1.1 d 0 type code part no. p 0 p 1 p 2 t 2 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 2.0 0.1 2.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 mnr02mnr04 mnr12 mnr14 mnr15 mnr18 mrapmrap eraperap errp erap mnr02mnr04 mnr12 mnr14 mnr15 mnr18 mrapmrap eraperap errp erap (unit : mm ) ?? paper tape t 2 a 0 b 0 b ase paper (bottom tape) components cavity top tape e f w p 0 p 2 p 1 d 0 ? reel dimensions a type code part no. b c d (unit : mm ) 13.5 0.5 178 2.0 80 1.0 60 1.0 mnr02 mrap mnr04 mrap mnr12 erap mnr14 erap mnr15 errp mnr18 erap 9.0 0.5 13.8 0.5 ?? fig.1 (mnr02 / 04 / 12 / 14 / 15 / 18) according to eiaj et-7200b (rrm ) 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd label downloaded from: http:///
r1102 a www.rohm.com ? 2015 rohm co., ltd. all rights reserved. notice ro hm cu stome r s upport sy s tem h ttp :// www.r oh m .co m/ co n tact / thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. no tes the information contained herein is subject to change without notice. before you use our products, pl ease contact our sales representative and verify th e la tes t specifica - tion s : alt hou gh rohm is contin uous ly wor ki ng to im pr ove p ro du ct r eli a bility and qualit y, semicon - du c tor s c an bre a k d ow n and ma lf un ct io n du e to var io us f ac to rs. th e re fore, in or der to prevent pe r so nal in ju ry or fi re ar isi ng f ro m fa ilur e, please ta ke sa f ety mea s ur es su ch as com plyin g wi th th e de r at in g ch ara ct er ist ic s, impl e menting redundant and f ir e preve nt ion designs, and u tilizin g ba ck up s a nd f ail - sa fe p ro ce du re s. ro hm shall have no responsibility for any damages arising out of the use of our poducts b ey ond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not gr ant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as ex emplified bel ow), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)11) 12) 13) 14) downloaded from: http:///
|
