features guard ring for transient protection low power loss,high efficiency high current capability,low vf high surge capacity mechanical data case: jedec r-6 molded plastic polarity: color band denotes cathode weight: 0.07 ounces , 2.1 grams mounting position: any maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% characteristics symbol 15sq03015SQ04015sq04515sq05015sq06015sq08015sq100 unit maximum recurrent peak reverse voltage v rrm 30 40 45 50 60 80 100 v maximum rms voltage v rms 21 28 31 .5 35 42 56 70 v maximum dc blocking voltage v dc 30 40 45 50 60 80 100 v maximum average forward rectified current @tc=95 i (av) a peak forward surge current 8.3ms single half sine- wave super imposed on rated load(jedec method) i fsm a peak forward voltage at 15a dc(note1) v f v maximum dc reverse current @tj=25 at rated dc bolcking voltage @tj=100 tyical junction capacitance (note2) c j pf typical thermal resistance (note2) r jc /w operating temperature range t j storage temperature range t stg -55 to+200 -55 to+200 15 350 0.55 0.5 ir 50 450 3.5 dimensions in inches and (millimeters) reverse voltage - 30 to 100volts forward current - 15.0 amperes photovoltaic solar cell protection schottky rectifier 0.7 0.8 notes:1.300us pulse width, 2%duty cycle. 2.measured at 1.0 mhz and applied reverse voltage of 4.0vdc. metal of silicon rectifier , majority carrier conduction for use in low voltage,high frequency inverters,free wheeling,and polarity protection applications ma 3.thermal resistance junction to case. r - 6 2100 .360(9.1) .340(8.6) .052(1.3) .048(1.2) dia .360(9.1) .340(8.6) dia 1.0(25.4) min 1.0(25.4) min t c measurement 15sq030 t hru 1 5sq100
r at i n g and charactertic curves 15sq030 t h r u 15sq100 tj=100 tj=50 tj=25 instantaneous reverse current(ma) fig.3-typical reverse characteristics percent of rated peak reverse voltage(%) 0 20 50 75 100 125 150 175 0.01 0.1 1 10 100 1000 peak forward surge current amperes number of cycles at 60hz fig.2-maximum non-repetitve surge 8.3single half-sine-wave (jedec metod) 1 2 5 10 20 50 100 0 60 180 240 300 120 360 average forward current amperes case temperature j =25 " f=1mhz 0. 1 10 10 tj=25 pulse width 300us 2%duty cycle instantaneous forward voltage volts instantaneous forward current(a) fig.4-typical forward characteristics 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.2 1.0 10 100 0.1 15sq080 - 15sq100 15sq050 - 15sq060 15sq030 15SQ040 - 15sq045
|