unit: mm 1 gaas mmics GN05013N gaas ic transmitting amplifier for phs n features l operated by a single positive power supply l low consumption current l input/output 50 w matching n absolute maximum ratings (ta = 25c) parameter power supply voltage input current allowable power dissipation operating temperature storage temperature symbol v dd p in p d t opr t stg ratings 5 - 15 400 - 10 to +60 - 30 to +120 unit v dbm mw c c n electrical characteristics (v dd = 3v, ta = 25 3c) parameter circuit current power gain adjacent channel leakage power (acp) voltage standing wave ratio harmonics output ratio conditions v gs = 0 to +0.5v v gs = 0 to +0.5v f = 1906.5mhz, p out = 20.5dbm v gs = 0 to +0.5v, f = 1906.5mhz p out = 20.5dbm 600khz detuning, 192khz bandwidth v gs = 0 to +0.5v, f = 1906.5mhz p out = 20.5dbm 900khz detuning, 192khz bandwidth v gs = 0 to +0.5v, f = 1906.5mhz p out = 20.5dbm v gs = 0 to +0.5v, f = 1906.5mhz p out = 20.5dbm min 34 typ 145 40 - 60 - 68 2.5 - 30 max 165 - 55 - 60 3 - 25 unit ma db dbc dbc ? dbc symbol i dd pg * 1 dm 1 * 1 dm 2 * 1 vswrin * 1 2fo * 1 * 1 gate voltage (v gs ) is the voltage which adjusts the drain current (i d ) to 125ma under no input signal condition. ** in case of handling this ic, take measures against static electricity. 1: v d3 7: gnd 13: v g3 2: gnd 8: p in 14: gnd 3: v d2 9: v g1 15: gnd 4: gnd 10: gnd 16: p out 5: v d1 11: v g2 17: gnd 6: gnd 12: gnd 18: gnd ssof-16d type package 0.5 0.250.05 0.20.05 4.70.2 0.4r f 0.8 1.050.1 1 8 16 9 5? 5? 5.00.2 6.20.2 1.60.05 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
gaas mmics 2 n measurement circuit GN05013N p out , i dd ? p in p out , p adj600 ? p in p out , dm1 ? p in 100pf 100pf 100pf 100pf 100pf 100pf 100pf 100pf 1000pf v dd 3.9nh 5 v d1 8 in out 16 3 v d2 1 v d3 9 v g1 11 v g2 13 v g3 12nh 3.9nh 1.0pf p in v gg p out C28 C16 C24 C22 C18 C26 C20 14 24 22 20 18 16 125 150 145 140 135 130 v dd =3.0v f=1906.5mhz i dd p out i dd =137ma p out =20.5dbm p in =C20.7dbm p in ( dbm ) p out ( dbm ) i dd ( ma ) C28 C16 C24 C22 C18 C26 C20 14 24 22 20 18 16 C70 C50 C54 C58 C62 C66 p adj600 p adj600 =C60dbc p out =20.5dbm p in =C20.7dbm p out v dd =3.0v f=1906.5mhz p in ( dbm ) p out ( dbm ) p adj600 ( dbc ) C30 C10 C20 C15 C25 0 25 20 15 10 5 C50 C70 C66 C62 C58 C54 p out dm1 p in ( dbm ) p out ( dbm ) dm1 ( dbc ) maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. caution for safety danger this product contains gallium arsenide (gaas). gaas powder and vapor are hazardous to human health if inhaled or ingested. do not burn, destroy, cut, cleave off, or chemically dissolve the product. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage. if you have any inquiries or questions about this book or our semiconductor products, please contact one of our sales offices listed on the back or semiconductor company's department. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
