model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/7 product specification model no. FYLP-3W-UBB-A customer approved signatures high-power led type size (mm): ? 6*7.1 checked by FYLP-3W-UBB-A a features: illuminations rohs compliant http://www.foryard.com emitting color:blue applications: decorative lighting architectural lighting interior automotive smt package approved by prepared by
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter, tolerance is 0.2mm. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/7 http://www.foryard.com model no. FYLP-3W-UBB-A FYLP-3W-UBB-A a
model. no. rev. min. typ. 2.80 --- 465 --- --- 25 --- 140 page 3/7 2.pay attention about static for ingan silicone ingan note: reflector wire encapsulate material 1.luminous intensity is based on the for yard standards. material ppa gold 50% power angle dominant wavelength luminous flux v if = 800ma chip item deg u a --- 2? if = 800ma 475 (d) vr = 5v if = 800ma condition --- items forward voltage reverse current ir symbol vf 5 ma unit a ma absolute maximun ratings(ta=25 o oo o c) 1000 3000 -40 o c+85 o c absolute maximum rating 800 symbol if model no. FYLP-3W-UBB-A items soldering temperature vr tsol ifp power dissipation operation temperature topr reverse voltage peak forward current* v mw FYLP-3W-UBB-A -40oc+100oc nm lm max unit lead soldering:260 /3sec 5 v 4.00 if = 800ma *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 tstg forward current(dc) pd http://www.foryard.com storage temperature typical electrical &optical charcteristics(ta=25oc )
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) radiation pattern. page 4/7 model no. FYLP-3W-UBB-A FYLP-3W-UBB-A a http://www.foryard.com i n g a n / a l 2 o 3 r elative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/7 http://www.foryard.com FYLP-3W-UBB-A model no. FYLP-3W-UBB-A a foryard o p t o e l e c t r o n i c s www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fyls-xxxxxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention qc: qc pass part no: fylp-xxxxxx xxxx/xx/xx foryard qc: qc pass xxxxxxxxxx rohs rohsrohs rohs 10 reels /box 6 boxes/carton outside label outside label
model. no. rev. precautions for use: page 6/7 secondary protection a model no. FYLP-3W-UBB-A FYLP-3W-UBB-A after the bag is opened, the high-power leds must b e stored at <30 and < 60% rh. under these conditions, high-power leds must be used within 24 hours. if t he leds are not within 24 hours after removal from the bag , baking is required take the material out of the pac kaging bag before baking. do not open the oven door 1. storage to prevent moisture absorption into high-power leds during the transportation and storage , the leds a re packed in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is required if the shelf life has expired before opening the packaging , check for air leaks in the bag. and soldering time no more than 2 seconds. the epoxy resin of an high-power led should not con tact the tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an high-power led during soldering. handling of an high-power led should be done only w hen the package has been cooled down to below 40 frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 (2)reflow soldering temperature profile http://www.foryard.com peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 7/7 a no stress should be exerted on the package during soldering. static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, when washing is required, ipa (isopropyl alcohol) s hould be used. esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. all devices, equipment and machinery must be proper ly grounded 4. others reflow soldering should not be done more t han one time must be pre-qualified to avoid damage to t he high-power leds. reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds http://www.foryard.com 3. static electricity solder=sn63-pb37 solder= pb-free average ramp-up rate:4 /sec.max average ramp-up rate:4 /sec.max model no. FYLP-3W-UBB-A FYLP-3W-UBB-A ramp-down rate:6 /sec.max ramp-down rate:6 /sec.max peak temperature:230 peak temperature:250 peak preheat temperature:100-150 peak preheat temperature:100-150 preheat time:100seconds.max preheat time:100seconds. max the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. high-brightness led light may injure human eyes. av oid looking directly into lighted led the appearance and specifications of the product ma y be modified for improvement without notice. time within 5 of actual peak temperature=10 sec. max time within 5 of actual peak temperature=10 sec. max duration above 183 is 80 sec. max duration above 217 is 80 sec. max is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc high-power led should not be modified afte r soldering. if modification cannot be avoided, the modification
|
