13 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ pxd30w series features u industry standard 2 x 1 footprint u six sided shielding u safety agency certi? cations u 9-36v or 18-75vdc input u wide range input single and dual output 30w dc-dc converters notes: (1) with external ceramic capacitor (24v: 4.7uf, 48v: 2.2uf) connected across input pins (2) for en61000-4-4 & -5 compliance ? t external electrolytic capacitor (24v: 330uf, 48v: 220uf) connected across input pins model single output dual output max output power 30w voltage accuracy 1% voltage adjustment 10% none minimum load none line regulation 0.2% load regulation 0.5% 1% cross regulation (25% to 100%) - 5% ripple and noise (peak to peak) <5.1v output: 100mv, 12-15v output: 150mv start up time 30ms remote on/off positive logic: on: open or 3-12v, off short or <1.2v negative logic: on: short or <1.2v, off: open or 3-12v temperature coef? cient <0.02%/c operating temperature -40 to +85c, derating necessary above 50c maximum case temperature 105c (overtemperature protection 115c) storage temperature -55 to 125c thermal shock mil-std-810f relative humidity (non condensing) 5 to 95% transient response (25% step load change) 250us recovery overvoltage protection (zener clamp) 3.3v: 3.9v, 5v: 6.2v, 12v: 15v, 15v: 18v overcurrent and short circuit protection typically at 150%, hiccup with self recovery input surge voltage (maximum for 100ms) 24v input: 50v, 48v input: 100v re? ected input ripple (peak to peak) 20ma isolation voltage 1600vdc minimum isolation resistance 109 ohms minimum isolation capacitance (max) 1500pf typical switching frequency (fixed) 430khz mtbf (bellcore tr-nwt-000332) 3,163,000 hours vibration mil-std-810f conducted and radiated emissions (1) en55022 level a immunity (2) en61000-4-2, -3, -4, -5, -6 pref criteria a safety agency certi? cations iec60950-1, ul60950-1, en60950-1, ce mark size (l x w x h) 2x1x0.4 weight 1.07 oz (30.5g) warranty two year speci? cations key market segments & applications
14 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision a3: dec 2011 pxd30w series outline drawing derating curves for additional information, please visit us.tdk-lambda.com/lp/products/px-series.htm hapxd (includes thermal adhesive pad) hapxbdclip (two clips required when used) heat sink (0.22 high) pxd10, 20 10-20w, 12v, 24v, 48v input 2x1 dc-dc pxe20, 30 20-30w, 12v, 24v, 48v input 2x1.6 dc-dc pxf30-40 30-40w, 12v, 24v, 48v input 2x2 dc-dc cc-e 1.5 - 25w, 5v, 12v, 24v & 48v input dc-dc other industrial products output output output input volt (v) curr (a) power (w) volt (v) model eff.(%) single outputs 3.3v 7.5a 24.75w 9 - 36vdc pxd30-24ws3p3 86% 3.3v 7.5a 24.75w 18 - 75vdc pxd30-48ws3p3 86% 5v 6.0a 30w 9 - 36vdc pxd30-24ws05 88% 5v 6.0a 30w 18 - 75vdc pxd30-48ws05 88% 12v 2.5a 30w 9 - 36vdc pxd30-24ws12 89% 12v 2.5a 30w 18 - 75vdc pxd30-48ws12 90% 15v 2.0a 30w 9 - 36vdc pxd30-24ws15 89% 15v 2.0a 30w 18 - 75vdc pxd30-48ws15 91% dual outputs 5v 3.0a 30w 9 - 36vdc PXD30-24WD05 88% 5v 3.0a 30w 18 - 75vdc pxd30-48wd05 88% 12v 1.25a 30w 9 - 36vdc pxd30-24wd12 87% 12v 1.25a 30w 18 - 75vdc pxd30-48wd12 88% 15v 1.0a 30w 9 - 36vdc pxd30-24wd15 87% 15v 1.0a 30w 18 - 75vdc pxd30-48wd15 88% pin # function single output dual output 1 + input + input 2 - input - input 3 remote on/off remote on/off 4 + output + output 5 - output common 6 trim - output suf? x function no suf? x positive logic -n negative logic model selectorpinout remote on/off option
|
