symbol v r i f t opr * t stg unit v ma ?c ?c ma72 silicon epitaxial planer type for band switching n features l low forward dynamic resistance r f l less voltage dependence of diode capacity c d l mini package, enabling down-sizing of the equipment and automatic insertion through taping n absolute maximum ratings (ta= 25?c) unit : mm n marking note 1 : rated input/output frequency : 100mhz 2 : * r f measurement device : yhp model 4191a rf impedance analyzer unit na v pf w condition v r = 33v i f =100ma v r = 6v, f=1mhz i f = 2ma, f=100mhz symbol i r v f c d r f * n electrical characteristics (ta= 25?c) parameter reverse voltage (dc) forward current (dc) operating ambient temperature storage temperature * maximum ambient temperature during operation rating 35 100 C 25 to + 85 C 55 to +150 1 : anode 2 : cathode mini type package (2-pin) band switching diodes ma111 parameter reverse current (dc) forward voltage (dc) diode capacitance forward dynamic resistance min typ 0.01 0.88 1.3 0.78 max 100 1 2 1.15 marking symbol : 4a 4a 12 3.3 0.2 * (3.8 0.2) 2.7 +0.2 -0.1 1.6 +0.2 -0.1 1.1 +0.2 -0.1 0.16 +0.1 -0.03 0.55 0.1 indicates cathode 0.3 0 0.05 5? 5? * ( )-wl type maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
i f C v f c d C v r r f C i f r f C f i r C ta band switching diodes ma72 10 ? 0 0.2 0.4 0.6 0.8 1.0 1 10 10 2 10 3 forward voltage v f ( v ) forward current i f ( ma ) ta=25?c 0.1 10 1 0.2 0.3 0.5 2 3 5 0 8 16 24 32 4 1220283640 reverse voltage v r ( v ) diode capacitance c d ( pf ) f=1mhz ta=25?c 10 ? 0 40 80 120 160 20 60 100 140 10 ? 1 10 10 2 ambient temperature ta ( ?c ) reverse current i r ( na ) v r =33v 0 0.4 0.2 0.8 0.6 1.0 110 3 30 100 forward current i f ( ma ) forward dynamic resistance r f ( ) f=100mhz ta=25?c 0 0.4 0.2 0.8 0.6 1.0 10 100 30 300 1000 frequency f ( mhz ) forward dynamic resistance r f ( ) i f =2ma ta=25?c maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
