? semiconductor components industries, llc, 2011 april, 2011 ? rev. 0 1 publication order number: P3P8220A/d P3P8220A/ah general purpose peak emi reduction ic functional description P3P8220A/ah is a versatile, 1.8v/2.5v/3.3v peak emi reduction ic. P3P8220A accepts an input clock from an external reference and delivers a 1x modulated clock output. P3P8220A is a low drive part and P3P8220Ah is a high drive part. refer to dc/ac electrical characteristic table. P3P8220A/ah operates with 1.8v/2.5v/3.3v supply and is available in an 8 pin , wdfn (2 mm x 2 mm) package . general features ? 1x, lvcmos peak emi reduction ? supports non ? continuous input clock applications ? input / output frequency range: up to 60 mhz ? low and high drive part ? supply voltage: 1.8 v 0.1 v 2.5 v 0.2 v 3.3 v 0.3 v ? 8 ? pin, wdfn(2 mm x 2 mm) package ? these devices are pb ? free, halogen free/bfr free and are rohs compliant application ? P3P8220A is targeted towards consumer electronic applications figure 1. block diagram v dd gnd digital frequency modulation clkin modout wdfn8 case 511aq marking diagram http://onsemi.com 1 gh = specific device code m = date code = pb ? free device gh m 1 1 2 3 4 8 7 6 5 clkin nc nc gnd nc nc modout pin configuration see detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. ordering information v dd
P3P8220A/ah http://onsemi.com 2 table 1. pin description pin # pin name type description 1 clkin i external reference clock input 2 nc no connection 3 nc no connection 4 gnd p ground 5 modout o buffered modulated clock output. 6 nc no connection 7 nc no connection 8 v dd p 1.8v/2.5v/3.3v supply voltage table 2. operating conditions symbol description min max unit v dd supply voltage 1.8 v 2.5 v 3.3 v 1.7 2.3 3.0 1.9 2.7 3.6 v t a operating temperature (ambient temperature) 0 70 c c l load capacitance 15 pf c in input capacitance 7 pf table 3. absolute maximum rating symbol description rating unit v dd, v in voltage on any input pin with respect to ground ? 0.5 to +4.6 v t stg storage temperature ? 65 to +125 c t s max. soldering temperature (10 sec) 260 c t j junction temperature 150 c t dv static discharge voltage (as per jedec std22 ? a114 ? b) 2 kv stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. note: these are stress ratings only and are not implied for functional use. exposure to absolute maximum ratings for prolonged periods of time may affect device reliability.
P3P8220A/ah http://onsemi.com 3 table 4. electrical characteristics symbol parameter test conditions min typ max unit v dd(1.8v) supply voltage 1.7 1.8 1.9 v v dd(2.5v) 2.3 2.5 2.7 v dd(3.3v) 3 3.3 3.6 v il input low voltage 0.35*v dd v v ih input high voltage 0.65*v dd v dd +0.3 v v ol output low voltage P3P8220A v dd(1.8v) , i ol = 4ma 0.25*v dd v v dd(2.5v, 3.3v) , i ol = 8ma P3P8220Ah v dd(1.8v) , i ol = 6ma v dd(2.5v, 3.3v) , i ol = 12ma v oh output high voltage P3P8220A v dd(1.8v) , i ol = -4ma 0.75*v dd v v dd(2.5v, 3.3v) , i ol = -8ma P3P8220Ah v dd(1.8v) , i ol =- 6ma v dd(2.5v, 3.3v) , i ol = -12ma i cc static supply current clkin pulled low v dd(1.8v) 1.3 ma v dd(2.5v) 1.5 v dd(3.3v) 1.7 i dd dynamic supply current v dd(1.8v) 15 mhz 2.3 ma 60 mhz 6.0 v dd(2.5v) 15 mhz 3.2 60 mhz 8.0 v dd(3.3v) 15 mhz 4.5 60 mhz 12 c l load capacitance 15 pf z 0 output impedance v dd(1.8v) P3P8220A 50 P3P8220Ah 30 v dd(2.5v) P3P8220A 36 P3P8220Ah 24 v dd(3.3v) P3P8220A 30 P3P8220Ah 20
P3P8220A/ah http://onsemi.com 4 table 5. switching characteristics parameter test conditions min typ max unit input frequency 60 mhz modout 60 output rise time (notes 1 & 2) measured between 20% to 80% v dd(1.8v) P3P8220A 3.0 5.0 ns P3P8220Ah 2.0 4.0 v dd(2.5v) P3P8220A 1.8 3.0 P3P8220Ah 1.2 2.5 v dd(3.3v) P3P8220A 1.4 2.5 P3P8220Ah 1.0 1.6 output fall time (notes 1 & 2) measured between 20% to 80% v dd(1.8v) P3P8220A 2.4 4.0 P3P8220Ah 1.6 3.0 v dd(2.5v) P3P8220A 1.8 3.0 P3P8220Ah 1.2 2.0 v dd(3.3v) P3P8220A 1.4 2.0 P3P8220Ah 1.0 1.6 output duty cycle (notes 1, 2 & 3) measured at vdd/2 45 50 55 % cycle-to-cycle jitter (note 1) unloaded spreaded output v dd(1.8v) 15 mhz 350 ps 60 mhz 200 v dd(2.5v) 15 mhz 500 60 mhz 150 v dd(3.3v) 15 mhz 750 60 mhz 200 maximum input-output delay (notes 1 & 2) unloaded spreaded output v dd(1.8v) 7.5 ns v dd(2.5v) 7.5 v dd(3.3v) 7.5 1. parameter is guaranteed by design and characterization. not 100% tested in production. 2. all parameters are specified with 15 pf loaded outputs. 3. for an input duty cycle (typ) of 50%.
P3P8220A/ah http://onsemi.com 5 switching waveforms figure 2. duty cycle timing t 2 t 1 v dd /2 v dd /2 v dd /2 output figure 3. output rise/fall time t 3 output t 4 20% 80% 20% 80% figure 4. input ? output propagation delay note: refer pin description table for functionality details. 4 8 clkin gnd 1 2.2 f c2 modout modout cloc k P3P8220A/ah 0.1 f r rs c1 vddin 5 nc 2, 3, 6, 7 figure 5. typical application circuit clkin v dd optional noise reduction filter note: device to device variation of t skew and i/o delay is 20%.
P3P8220A/ah http://onsemi.com 6 ordering information ordering code marking temperature package type shipping ? P3P8220Ag ? 08cr gh 0 c to +70 c 8 ? pin (2 mm x 2 mm) wdfn (pb ? free) tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. *a ?microdot? placed at the end of last row of marking or just below the last row toward the center of package indicates pb ? free.
P3P8220A/ah http://onsemi.com 7 package dimensions wdfn8 2x2, 0.5p case 511aq ? 01 issue a notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimension b applies to plated terminal and is measured between 0.15 and 0.30mm from terminal. c a seating plane d e 0.10 c a3 a a1 0.10 c dim a min millimeters 0.70 a1 0.00 a3 0.20 ref b 0.20 d 2.00 bsc e 2.00 bsc e 0.50 bsc pin one reference 0.05 c 0.05 c 8x a 0.10 c note 3 l e b b 4 5 8x 1 8 0.05 c 0.50 l *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 2.30 0.50 0.78 7x dimensions: millimeters bottom view 0.35 pitch 8x 0.80 0.05 0.30 0.60 max l1 detail a l optional constructions l --- l1 0.15 b top view side view e/2 1 package outline detail b detail a 2x 2x 8x recommended 0.88 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 P3P8220A/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
