View EK42822-01_8398887.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pe42822 document category: product specification ultracmos? spdt rf sw itch, 700 mhzC3.8 ghz ?2015, peregrine semiconductor corporation. all rights reserved. ? headquarters: 9380 carroll park drive, san diego, ca, 92121 product specification doc-67330-2 C (09/2015) www.psemi.com features ? excellent single-event peak power handling of 46.1 dbm lte ? exceptional linearity performance across all frequencies ? input ip3: 65 dbm ? input ip2: 120 dbm ? extended operating temperature of 105 c ? 1.8v/3.3v ttl compatible control ? high esd performance of 3 kv hbm on rf pins to ground ? packaging ? 16-lead 3 3 0.85 mm qfn applications ? wireless infrastructure ? receiver protection switch product description the pe42822 is a harp? technology-enhanced absorptive 50 ? spdt rf protection switch designed for use in high power and high performance wireless infrastructure applications such a mid-power microcell products, supporting frequencies up to 3.8 ghz. this switch features high linearity, which remains invariant across the full supply range. the pe42822 also features exceptional isolation, fast switching time and is offered in a 16-lead 3 3 mm qfn package. in addition, no external blocking capacitors are required if 0 vdc is present on the rf ports. the pe42822 is manufactured on peregrine?s ultracmos ? process, a patented variation of silicon-on-insulator (soi) technology on a sapphire substrate. peregrine?s harp technology enhancements deliver high linearity and excellent harmonics performance. it is an innovative feature of the ultracmos process, offe ring the performance of gaas with the economy and integration of conventional cmos. figure 1 ? pe42822 functional diagram rfc 50 50 cmos control driver and esd rf2 rf1 ls ctrl v dd
pe42822 spdt rf switch page 2 doc-67330-2 C (09/2015) www.psemi.com absolute maximum ratings exceeding absolute maximum ratings listed in table 1 may cause permanent damage. operation should be restricted to the limits in table 2 . operation between operating range maximum and absolute maximum for extended periods may reduce reliability. esd precautions when handling this ultracmos device, observe the same precautions as with any other esd-sensitive devices. although this device contains circuitry to protect it from damage due to esd, precautions should be taken to avoid exceeding the rating specified in table 1 . latch-up immunity unlike conventional cmos devices, ultracmos devices are immune to latch-up. table 1 ? absolute maximum ratings for pe42822 parameter/condition min max unit supply voltage, v dd ?0.3 5.5 v digital input voltage, v ctrl ?0.3 3.6 v ls input voltage ?0.3 3.6 v maximum input power, p pk (1) 700?3800 mhz 46.1 dbm storage temperature range ?65 +150 c esd voltage hbm (2) rf pins to gnd all pins 3000 1500 v v esd voltage mm (3) , all pins 200 v esd voltage, cdm (4) , all pins 1000 v notes: 1) max 5 cycles at 10 second s duration each cycle, p pk = 46.1 dbm, p av = 38.1 dbm, 8 db par lte signal. all other parameters within recom- mended operating conditions. no power applied to off-terminated port. no hot switching. 2) human body model (mil std 883 method 3015). 3) machine model (jedec jesd22 a115). 4) charged device model (jedec jesd22-c101).
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 3 www.psemi.com recommended operating conditions table 2 lists the recommending operating conditions for th e pe42822. devices should not be operated outside the recommended operating conditions listed below. table 2 ? recommended operating conditions for pe42822 parameter min typ max unit supply voltage, v dd 2.3 5.5 v supply current, i dd 120 200 a digital input high 1.17 3.6 v digital input low ?0.3 0.6 v rf input power, single event (1) 700?3800 mhz, peak 700?3800 mhz, average 46.1 38.1 dbm dbm rf input power 700?3800 mhz, pulsed, +25 c (2) 700?3800 mhz, pulsed, +105 c (2) 700?3800 mhz, cw, ?40 c to +105 c 38.5 38 32 dbm dbm dbm rf input power into terminated ports, cw 24 dbm operating temperature range ?40 +25 +105 c notes: 1) single event: 10-second duration with 8 db par lte signal. no power applied to off-terminated port. no hot switching. 2) 2.5% duty cycle of 4620 s pe riod. no power ap plied to off-terminated port. no hot switching.
pe42822 spdt rf switch page 4 doc-67330-2 C (09/2015) www.psemi.com electrical specifications table 3 provides the pe42822 key electrical specifications @ +25 c, v dd = 2.3?5.5v, unless otherwise specified. control logic table 4 provides the control logic truth table for the pe42822. table 3 ? pe42822 electrical specifications parameter path condition min typ max unit operational frequency 700 3800 mhz insertion loss rfc?rfx 700?3800 mhz 0.8 1.05 db isolation rfx?rfx 700?3800 mhz 44 47 db isolation rfc?rfx 700?3800 mhz 39 41 db return loss (common and active port) rfx 700?3800 mhz 20 db input 0.1db compression point (*) rfc?rfx 700?3800 mhz 39.5 dbm input ip3 rfc?rfx 700?3800 mhz 65 dbm input ip2 rfc?rfx 700?3800 mhz 120 dbm switching time 50% ctrl to 90% or 10% of final value 500 700 ns settling time 50% ctrl to 0.05 db final value, rising and fall- ing edge 24s note: * the input p0.1db compression point is a linearity figure of merit. refer to table 2 for the operating rf input power (50 ? ). table 4 ? truth table for pe42822 ls ctrl rfc?rf1 rfc?rf2 00o f fo n 01o no f f 10o no f f 11o f fo n
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 5 www.psemi.com typical performance data figure 2 ? figure 25 show the typical performance data @ +25 c, v dd = 2.3?5.5v, unless otherwise specified. figure 2 ? insertion loss vs temp (rf1) figure 3 ? insertion loss vs v dd (rf1) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 insertion loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 insertion loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 6 doc-67330-2 C (09/2015) www.psemi.com figure 4 ? insertion loss vs temp (rf2) figure 5 ? insertion loss vs v dd (rf2) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 insertion loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 insertion loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 7 www.psemi.com figure 6 ? rfc port return loss vs temp (rf1) figure 7 ? rfc port return loss vs v dd (rf1) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 8 doc-67330-2 C (09/2015) www.psemi.com figure 8 ? rfc port return loss vs temp (rf2) figure 9 ? rfc port return loss vs v dd (rf2) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 9 www.psemi.com figure 10 ? active port return loss vs temp (rf1) figure 11 ? active port return loss vs v dd (rf1) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 10 doc-67330-2 C (09/2015) www.psemi.com figure 12 ? rfc port return loss vs temp (rf2) figure 13 ? rfc port return loss vs v dd (rf2) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 11 www.psemi.com figure 14 ? terminated port return loss vs temp (rf1) figure 15 ? terminated port return loss vs v dd (rf1) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 12 doc-67330-2 C (09/2015) www.psemi.com figure 16 ? terminated port return loss vs temp (rf2) figure 17 ? terminated port return loss vs v dd (rf2) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 return loss (db) frequency (ghz) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 13 www.psemi.com figure 18 ? isolation vs temp (rf1Crf2, rf1 active) figure 19 ? isolation vs v dd (rf1Crf2, rf1 active) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 14 doc-67330-2 C (09/2015) www.psemi.com figure 20 ? isolation vs temp (rf2Crf1, rf2 active) figure 21 ? isolation vs v dd (rf2Crf1, rf2 active) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 15 www.psemi.com figure 22 ? isolation vs temp (rfcCrf1, rf2 active) figure 23 ? isolation vs v dd (rfcCrf1, rf2 active) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) 2.3v 3.4v 5.5v
pe42822 spdt rf switch page 16 doc-67330-2 C (09/2015) www.psemi.com figure 24 ? isolation vs temp (rfcCrf2, rf1 active) figure 25 ? isolation vs v dd (rfcCrf2, rf1 active) 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) ?40 oc +25 oc +85 oc +105 oc 0 0.5 1 1.5 2 2.5 3 3.5 4 ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 frequency (ghz) isolation (db) 2.3v 3.4v 5.5v
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 17 www.psemi.com evaluation kit the spdt switch evaluation board was designed to ease customer evaluation of peregrine?s pe42822. the rf common port is connected through a 50 ? transmission line via the sma connector, j1. rf1 and rf2 ports are connected through 50 ? transmission lines via sma connectors j2 and j3, respectively. a 50 ? through trans- mission line is available via sma connectors j5 and j6, which can be used to de-embed the loss of the pcb. j4 provides dc and digital inputs to the device. for the true performance of the pe42822 to be realized, the pcb should be designed in such a way that rf transmission lines and sensitive dc i/o traces are heavily isolated from one another. figure 26 ? evaluation kit layout for pe42822
pe42822 spdt rf switch page 18 doc-67330-2 C (09/2015) www.psemi.com pin information this section provides pinout information for the pe42822. figure 27 shows the pin map of this device for the available package. table 5 provides a description for each pin. figure 27 ? pin configuration (top view) exposed ground pad gnd rf1 gnd gnd gnd gnd rfc gnd gnd rf2 gnd gnd v dd ls ctrl gnd 1 3 2 4 12 10 11 9 5 7 6 8 16 14 15 13 pin 1 dot marking table 5 ? pin descriptions for pe42822 pin no. pin name description 1, 3?6, 8? 10, 12 13 gnd ground 2 rf1 (*) rf port 1 7 rfc (*) rf common port 11 rf2 (*) rf port 2 14 ctrl digital control logic input 15 ls logic select?used to determine the definition for the ctrl pin (see table 4 ) 16 v dd supply voltage (nominal 3.3v) pad gnd exposed pad: ground for proper oper- ation note: * rf pins 2, 7 and 11 must be 0 vdc. the rf pins do not require dc blocking capacitors for proper operation if the 0 vdc requirement is met.
pe42822 spdt rf switch doc-67330-2 C (09/2015) page 19 www.psemi.com packaging information this section provides packaging data including the moisture sensitivity level, package drawing, package marking and tape and reel information. moisture sensitivity level the moisture sensitivity level rating for the pe42822 in the 16-lead 3 3 0.85 mm qfn package is msl3. package drawing top-marking specification figure 28 ? package mechanical drawing for 16-lead 3 3 0.85 mm qfn figure 29 ? package marking specifications for pe42822 top view side view bottom view 3.00 3.00 pin #1 corner 1.700.05 0.850.05 0.05 0.203 recommended land pattern 13 16 1 4 5 9 8 12 1.700.05 0.50 0.250.05 (x16) 1.50 0.300.05 (x16) 1.75 3.75 3.75 0.10 c a b 0.05 c a 0.10 c (2x) c 0.10 c 0.05 c seating plane b all features 0.10 c (2x) 0.750 (x16) 0.30 (x16) 0.50 1.75 (x12) (x12)
pe42822 spdt rf switch page 20 doc-67330-2 C (09/2015) www.psemi.com tape and reel specification figure 30 ? tape and reel specifications for 16-lead 3 3 0.85 mm qfn t k0 a0 b0 p0 p1 d1 a section a-a a direction of feed d0 e w0 p2 see note 3 see note 1 f see note 3 a0 b0 k0 d0 d1 e f p0 p1 p2 t w0 3.3 3.3 1.10 1.50 + 0.10/ -0.00 1.50 min 1.75 0.10 5.50 0.05 4.00 8.00 2.00 0.05 0.30 0.05 12.00 0.30 device orientation in tape pin 1 notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2 2. camber in compliance with eia 481 3. pocket position relative to sprocket hole measured as true position of pocket, not pocket hole dimensions are in milimeters unless otherwise specified
pe42822 spdt rf switch product specification www.psemi.com doc-67330-2 C (09/2015) document categories advance information the product is in a formative or design stage. the datasheet contains design target specifications for product development. specifications and features may change in any manner without notice. preliminary specification the datasheet contains preliminary data. additional data may be added at a later date. peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. product specification the datasheet contains final data. in the event peregrine decides to change the specifications, peregri ne will notify customers of the intended changes by issuing a cnf (customer notification form). product brief this document contains a shortened version of the datasheet. for the full datasheet, contact sales@psemi.com. not recommended for new designs (nrnd) this product is in production but is not recommended for new designs. end of life (eol) this product is currently going th rough the eol process. it has a specific last-time buy date. obsolete this product is discontinued. orde rs are no longer accepted for this product. sales contact for additional information, contact sales at sales@psemi.com. disclaimers the information in this document is believed to be reliable. ho wever, peregrine assumes no liability for the use of this inform ation. use shall be entirely at the user?s own risk. no patent rights or licenses to any circuits described in this document are implied or granted to any third party. peregrine?s products are not designed or intended for use in devi ces or systems intended for surgical implant, or in other appl ications intended to support or sustain life, or in any applicati on in which the failure of the peregrine product could create a situation in which personal injury or death might occur. peregrine assumes no liability for damages, incl uding consequential or incidental damages, aris ing out of the use of its products in such applications. patent statement peregrine products are protected under one or more of the following u.s. patents: patents.psemi.com copyright and trademark ?2015, peregrine semiconductor corporation. all rights reserved. the peregrine name, l ogo, utsi and ultracmo s are registered tr ademarks and harp, multiswitch and dune are trademar ks of peregrine semiconductor corp. ordering information table 6 lists the available ordering codes for the pe42822 as well as available shipping methods. table 6 ? ordering codes for pe42822 ordering codes description packaging shipping method pe42822a-z pe42822 spdt rf switch green 16-lead 3 3 mm qfn 3000 units/t&r EK42822-01 pe42822 evaluation kit evaluation kit 1/box

▲Up To Search▲

Price & Availability of EK42822-01

	To Download EK42822-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .