rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14030 7 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks, and registered trademarks are the property of their respective owners. ?2013, rf micro devices, in c. 1 of 3 RFRP2920 si reverse hybrid 5 mhz to 1 00 mhz (low current) the RFRP2920 is a hybrid reverse amplifier. the part employs a silicon die. it has extremely low distortion and superior return loss performance. the part also provides optimal reliability with low noise and is well suited for 5mhz to 100mhz catv amplifiers for reverse channel systems. package: sot - 115j features excellent linearity superior r eturn loss performance extremely low distortion optimal reliability low noise unconditionally stable under all terminations 38.3db typ . gain at 1 00 mhz 160 ma max. at 24v dc applications 5 mhz to 1 00 mhz cat v amplifier for reverse channel systems ordering information RFRP2920 box with 50 pieces absolute maximum rat ings parameter rating unit rf input voltage (single tone) 65 dbmv dc supply over - voltage (5 minutes) 30 v storage temperature - 40 to +100 c operating mounting base temperature - 30 to +100 c caution! esd sensitive device. rohs (restriction of hazardous substances): compliant per eu directive 2011/65/eu. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum r ating conditions is not implie d. RFRP2920
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14030 7 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 RFRP2920 nominal operating parameters parameter specification unit condition min typ max general performance v + = 24v; t mb = 30c; z s = z l = 75 power gain 37.8 38.3 38.6 db f = 5 mhz 37.6 38.3 db f = 100 mhz slope [ 1 ] - 0.2 0 0.5 db f = 5mhz to 100 mhz flatness of frequency response 0.3 db input return loss 20.0 db output return loss 20.0 db noise figure 3.8 4.2 db f = 100 mhz total current consumption (dc) 150.0 158.0 160.0 ma distortion data 5 mhz to 100 mhz v + = 24v; t mb = 30c; z s = z l = 75 ctb - 72 dbc 7 ch flat; v o = 50dbmv [2] - 69 dbc 12 ch flat; v o = 50dbmv [3] xmod - 64 db 7 ch flat; v o = 50dbmv [2] - 61 db 12 ch flat; v o = 50dbmv [3] cso - 70 dbc 7 ch flat; v o = 50dbmv [2] - 68 dbc 12 ch flat; v o = 50dbmv [3] d 2 - 70 dbc [4] stb - 72 db [5] 1. the slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 7 channels, us frequency raster: t7 - t13 (7.0mhz to 43.0mhz), +50dbmv flat output level. 3. 12 channe ls, us frequency raster: t7 - t13 (7.0mhz to 43.0mhz), 2 - 6 (55.25mhz to 83.25mhz), +50dbmv flat output level. 4. f 1 = 7mhz; v 1 = 50dbmv; f 2 = 25mhz; v 2 = 50dbmv; f test = f 1 + f 2 = 32mhz. 5. f 1 = 13mhz; v 1 = 50dbmv; f 2 = 25mhz; v 2 = v 1 ; f 3 = 7mhz; v 3 = v 1 ; f test = f 1 + f 2 - f 3 = 31mhz. composite second order (cso) - the cso parameter (both sum and difference products) is defined by the ncta. composite triple beat (ctb) - the ctb parameter is defined by the ncta. cross modulation (xmod) - cross modulation (xmod) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested.
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14030 7 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3 RFRP2920 package drawing (dimensions in millimeters) 13, 4 1 2 3 5 7 8 9 r o q m 5 10mm 0 scale b n l f a d h ? g t s p j u i e c k european projection n o m i n a l m i n m a x a 4 4 , 6 0 , 2 4 4 , 4 4 4 , 8 b 1 3 , 6 0 , 2 4 4 , 4 1 3 , 8 c 2 0 , 4 0 , 5 1 9 , 9 2 0 , 9 d 8 0 , 1 5 7 , 8 5 8 , 1 5 e 1 2 , 6 0 , 1 5 1 2 , 4 5 1 2 , 7 5 f 3 8 , 1 0 , 2 3 7 , 9 3 8 , 3 g 4 + 0 , 2 / - 0 , 0 5 3 , 9 5 4 , 2 h 4 0 , 2 3 , 8 4 , 2 i 2 5 , 4 0 , 2 2 5 , 2 2 5 , 6 j u n c 6 - 3 2 - - k 4 , 2 0 , 2 4 , 0 4 , 4 l 2 7 , 2 0 , 2 2 7 , 0 2 7 , 4 m 1 1 , 6 0 , 5 1 1 , 1 1 2 , 1 n 5 , 8 0 , 4 5 , 4 6 , 2 o 0 , 2 5 0 , 0 2 0 , 2 3 0 , 2 7 p 0 , 4 5 0 , 0 3 0 , 4 2 0 , 4 8 q 2 , 5 4 0 , 3 2 , 2 4 2 , 8 4 r 2 , 5 4 0 , 5 2 , 0 4 3 , 0 4 s 2 , 5 4 0 , 2 5 2 , 2 9 2 , 7 9 t 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 u 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 p i n n a m e 1 i n p u t 2 - 3 g n d 4 5 + v b 6 7 - 8 g n d 9 o u t p u t pinning: notes:
|
