ul recognized compact and lightweight high stability low power consumption quick response ample protective functions information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?012 hamamatsu photoni cs k.k. subject to local technical requirements and regulations, availability of products included in this promotional material may var y. please consult with our sales office. specifications features the c10673 series is an on-board type high voltage power supply unit, especially designed for photomultiplier tubes. ul recognized (file no. e315290) compact high voltage power supply c10673 series input voltage input current a variable output range specification guaranteed output voltage range output current line regulation against 1 v or 0.5 v input change ab load regulation against 0 % to 100 % load change a ripple / noise (p-p) ab output voltage control controlling voltage input impedance reference voltage output output voltage setting (absolute value) output voltage rise time (0 % ? 99 %) ab temperature coefficient ab operating ambient temperature ab operating ambient humidity c storage temperature storage humidity c weight protective functions with no load with full load typ. typ. max. typ. typ. typ. typ. typ. typ. typ. typ. typ. parameter c10673 c10673-01 unit +15 1 15 95 0.6 +12 0.5 20 100 0.5 0 to -1250 -200 to -1250 0.01 0.01 0.01 % (125 mv) by external controlling voltage (0 v to +5 v) or external potentiometer (50 k ? ) 80 +5.13 v controlling voltage 250 150 0.015 0 to +40 below 80 % -20 to +60 below 80 % 31 v ma v v ma % % k ? v ms % / c c c g note: a at maximum output voltage. b at maximum output current. c no condensation. units protected against reversed power input, reversed / excessive controlling voltage input, continuous overloading / short circuit in output
tacc1042e02 dec. 2012 ip figure 1: connection diagrams figure 2: output voltage controlling characteristic figure 3: example of ripple / noise reduction circuit figure 4: dimensional outline (unit: mm) drilling data for pc board (soldering face) taccc0049ed taccb0109ea taccc0143ea tacca0159eb 3.81 15.88 15.88 9.53 8.25 10.16 2.54 11.7 4- 2 6- 0.8 controlling voltage (v) output voltage (v) 5 0 1234 6 5.2 -1500 0 -250 -500 -750 -1000 -1250 hamamatsu photonics k.k. hamamatsu photonics k.k., electron tube division 314-5, shimokanzo, iwata city, shizuoka pref., 438-0193, japan, telephone: (81)539/62-5248, fax: (81)539/62-2205 u.s.a.: hamamatsu corporation: 360 foothill road, p. o. box 6910, bridgewater. n.j. 08807-0910, u.s.a., telephone: (1)908-231-0960, fa x: (1)908-231-1218 e-mail: usa@hamamatsu.com germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49)8152-375-0, f ax: (49)8152-2658 e-mail: info@hamamatsu.de france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: (3 3)1 69 53 71 00, fax: (33)1 69 53 71 10 e-mail: infos@hamamatsu.fr united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road welwyn garden city hertfordshire al7 1bw, united kingdom, teleph one: 44-(0)1707-294888, fax: 44(0)1707-325777 e-mail: info@hamamatsu.co.uk north europe: hamamatsu photonics norden ab: thorshamnsgatan 35 se-164 40 kista, sweden, telephone: (46)8-509-031-00, fax: (46)8-509-031-01 e-mail: info@hamamatsu.se italy: hamamatsu photonics italia: s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39)02-935 81 733, fax: (39)02-935 81 741 e-mail: info@hamamatsu.it china: hamamatsu photonics (china) co., ltd.: 1201 tower b, jiaming center, 27 dongsanhuan road north, chaoyang district, beijing 100 020, china, telephone: (86)10-6586-6006, fax: (86)10-6586-2866 e-mail: hpc@hamamatsu.com.cn www.hamamatsu.com compact high voltage power supply c10673 series load 0 v to +5 v* qwe r t y +15 v or +12 v don't use * the instability in the external controlling voltage should be minimised as it directly affects the output voltage quality. load max. min. 50 k ? qwe r t y +15 v or +12 v pin assignment q vcc +15 v or +12 v w gnd e vcont gnd r vcont t vref +5.13 v typ. y hv out the housing is internally connected to pin w . pins w and e are internally connected. output voltage control by external voltage output voltage control by external potentiometer 17.78 10.16 2.54 6-0.5 0.25 (bottom view) 5 min. q wert 3.81 15.88 15.88 1.5 2.5 24 0.5 y 29 0.5 0.3 mounting tabs 46 12 ? the mounting tabs can be bent to the right angle only once ? the mounting tabs are solderable. ) ( tacca0157ec +15 v or +12 v input gnd q w y hv out output gnd 0.068 f (2 kv) * the ripple / noise can be halved by adding capacitors as illustrated above. c10673/-01 47 f (25 v) + 1.5 k ?
|
