www.vishay.com 3 document number: 13050 revision 13-mar-02 PHMKDG vishay esta estadry d-type capacitor for indoor use estadry ? d-type three phase mk-power capacitor according to din en 60831-1/-2 for indoor application mk = metallized plastic film dielectric. estadry ? mk-type capacitor for power factor correction in low voltage systems. rated voltages 400v, 415v, 440v, 460v, 525v, 690v, 760v rated frequency 50hz* rated output 50kvar, other outputs upon request casing aluminum, welded and hermetically sealed degree of protection ip00, indoor (higher degrees of protection up to ip54 upon request) standards din en 60831-1/-2, iec60831-1/-2 (vde 0560-46/-47) losses (including discharge resistors) less than 0.45 watt per kvar at upper temperature limit dielectric polypropylene film impregnant without, dry type, non-pcb, non-toxic electrodes self-healing safety devices self-healing dielectric and overpressure tear-off fuses external discharge resistors for u 50v, t = 60s (for ip00 version) temperature class - 25/d (max. 55 c), (- 40/d upon request) shelf temperature - 40/+ 70 c switch-in-current max.300 x i n insulation 6/15kv tests terminal/terminal: 2.15 x u n /2 seconds terminal/casing: 6000v/10 seconds *can also be used for 60hz. the output will be 1.2 times higher. a lower class of temperature might be taken into account.
document number: 13050 revision 13-mar-02 www.vishay.com 4 PHMKDG vishay esta estadry d-type capacitor for indoor use type article rated voltage rated output capacitance current weight height h no. [v] [kvar] [ f] [a] [kg] [mm] PHMKDG 400.3.50 40593 400 50 3 x 331.6 ? 72 app. 4.9 210 PHMKDG 415.3.40 39589 415 40 3 x 246.4 ? 56 app. 4.9 210 PHMKDG 415.3.50 39590 415 50 3 x 308.0 ? 70 app. 4.9 210 PHMKDG 440.3.50 40673 440 50 3 x 274.0 ? 66 app. 4.9 210 PHMKDG 440.3.56, 2 41292 440 56.2 3 x 308.0 ? 74 app. 4.9 210 PHMKDG 460.3.50 40288 460 50 3 x 250.7 ? 63 app. 4.9 210 PHMKDG 525.3.50 41293 525 50 3 x 192.5 ? 55 app. 4.9 210 PHMKDG 690.2.50 41449 690 50 3 x 334.3 y 42 app. 4.9 210 PHMKDG 760.2.50 43993 760 50 3 x 275.5 y 38 app. 4.9 210 m10 m12 15.8 + 1 h 1 44 - 2 + 2 68 - 2 + 2 required space for bulging screw bolt m10 hexagonal-nut m10 spring washer wave slotted nut m10 screw bolt m8 x 15 toothed lock washer hexagonal nut m12 172 70 160 78 ? ? ? ? ? y discharge resistors 25
|
