power choke high current pchc123hp 15 dcr isat allied part number inductance ( h) tolerance (%) test freq. pchc123hp-r10t-rc pchc123hp-r15t-rc pchc123hp-r22m-rc pchc123hp-r45m-rc pchc123hp-r56m-rc 0.10 0.15 0.22 0.45 0.56 30 30 20 20 20 100 100 100 100 100 0.36(0.43) 0.4(0.48) 0.7(0.81) 1.05(1.5) 1.3(1.9) 84 75 65 58 53 allied components interna tional 949-356-1780 www.a lli edcom pon en ts .com rohs (a) khz,1v all specifications subject to change without notice. revised 11/24/2015 irms (a) 43 41 38.5 33 30 typ.(max) pchc123hp-r47m-rc 0.47 20 100 1.2(1.8) 55 32 typ. features ? magnetically shielded construction ? expanded operating temp range electrical inductance range: .10h to 33h tolerance: as noted. operating temp: -40oc ~ +125oc test equipment (l): hp4284a lcr meter or equivalent pre-heat 150oc, 1 minute. physical packaging: 500 pieces per 13 inch reel. ? high saturation current up to 84a resistance to soldering heat solder composition: sn/ag3.0/cu0.5 solder temp: 260oc 5oc dcr: ch16502, agilent 33420a mirco-ohm meter marking: eia inductance code/ date code irms: current at which with out core loss. isat: current at which inductance drop is approximately 20%. test frequency: 100khz, 1v pchc123hp-r33m-rc 0.33 20 100 0.85(1.0) 62 36.5 pchc123hp-r36m-rc 0.36 20 100 0.87(1.1) 60 36 ? low dcr ? suitable for pick and place ? t=40oc temp rise immersion time: 10 sec. 1 sec. PCHC123HP-R60M-RC 0.60 20 100 1.5(2.2) 51 29 idc: 3260b wk & dc bias 3265b wk available in tighter tolerances. additional values available pchc123hp-r67m-rc pchc123hp-r68m-rc pchc123hp-r82m-rc pchc123hp-1r5m-rc pchc123hp-2r2m-rc 0.67 0.68 0.82 1.50 2.20 20 20 20 20 20 100 100 100 100 100 1.9(2.5) 1.9(2.5) 2.2(3.0) 4.8(5.5) 6.3(8.0) 49 49 44 35 29 28 28 25 19 16 pchc123hp-1r8m-rc 1.80 20 100 5.2(7.0) 30 17 pchc123hp-1r0m-rc 1.00 20 100 2.7(3.5) 40 24 pchc123hp-1r2m-rc 1.20 20 100 4.0(5.0) 37 21 pchc123hp-3r3m-rc 3.30 20 100 11(13.5) 27 12 pchc123hp-5r6m-rc pchc123hp-8r2m-rc 5.60 8.20 20 20 100 100 18(22) 23(28) 19 16 9.5 8.5 pchc123hp-6r8m-rc 6.80 20 100 20(24) 18 9 pchc123hp-4r7m-rc 4.70 20 100 15.3(18.5) 24 10 pchc123hp-100m-rc 10.0 20 100 29(34) 14 7 pchc123hp-330m-rc 33.0 20 100 132(160) 6.0 3.5 typ. (m) dimensions: inches (mm) .53.019 (13.50.5) .49.012 (12.50.3) .09.007 (2.30.2) .185.012 (4.70.3) .09.012 (2.30.3) schematic 8r2 1206
|