www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 9120 1-2497 ? 818-247-6000 ? fax 818-500-9912 6 dimensions in inches (millimeters) are subject to change without notice. ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. piggyback shrink boot connector adapters 317-102 emi/rfi environmental piggyback boot adapter, composite with drop-in banding porch material and finish coupling nut, sleeve, anti-rotation device: high temp. engineering thermoplastic (black)/n.a. adapter: table ii o-ring: silicone/n.a. shrink boot: elastomeric/n.a. band: sst/passivated notes see table i on page 3 for front-end dimensional details. assembly identifed with manufacturers name and part number, space permitting. glenair 600-091 or 600-157 series backshell assembly tools are recommended for assembly and installation. o-ring supplied with connector designator f & h only. o-ring not supplied with connector designator a. how to order product series basic no. finish sym (table ii) 317 f s 102 xb 16 - 2 k shell size (table iii) boot material type (table iv ) angular function s = straight a = pre-coiled band (omit if not required) fast and easy installation of boots and emi/rfi shielding bands hot melt adhesive .940 (23.9) max anti-rotation device b o-ring a thread c hex flats m as supplied pre-coiled band glenair part no. 600-057-1 connector designator a = mil-dtl-83723, series iii; mil-dtl-5015; mil-dtl-26482 f = mil-dtl-38999, series i & ii h = mil-dtl-38999, series iii & iv
www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 7 dimensions in inches (millimeters) are subject to change without notice. ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. piggyback shrink boot connector adapters 317-102 emi/rfi environmental piggyback boot adapter, composite with drop-in banding porch table iii: key dimensions connector designator a connector designator f connector designator h ? b ref. dash no. shell size ref. a thread class 2b dash no. shell size ref. a thread class 2b dash no. shell size ref. a thread iso metric 08 08 1/2-20 unf 08 08 7/16-28 unef 09 a m12 x 1.0-6h .812 (20.6) 10 10 5/8-24 unef 10 12 9/16-24 unef 11 b m15 x 1.0-6h .938 (23.8) 12 12 3/4-20 unef 12 12 11/16-24 unef 13 c m18 x 1.0-6h 1.125 (28.6) 14 14 7/8-20 unef 14 14 13/16-20 unef 15 d m22 x 1.0-6h 1.250 (31.8) 16 16 1-20 unef 16 16 15/16-20 unef 17 e m25 x 1.0-6h 1.375 (34.9) 18 18 1 1/16-18 unef 18 18 1 1/16-18 unef 19 f m28 x 1.0-6h 1.500 (38.1) 20 20 1 3/16-18 unef 20 20 1 3/16-18 unef 21 g m31 x 1.0-6h 1.625 (41.3) 22 22 1 5/16-18 unef 22 22 1 5/16-18 unef 23 h m34 x 1.0-6h 1.750 (44.5) 24 24 1 7/16-18 unef 24 24 1 7/16-18 unef 25 j m37 x 1.0-6h 1.875 (47.6) table ii: backshell finish options sym finish description xb electroless nickel xmt ni-ptfe, nickel-fluorocarbon polymer xn selective plating, nickel and cadmium olive drab (see detail b) table iii: key dimensions (con"t) dash no. c flats ? g m min n max max min 08 .750 (19.1) .736 (18.7) .140 (3.60) .250 (6.40) .197 (5.00) 10 .875 (22.2) .860 (21.8) .270 (6.90) .355 (9.00) .197 (5.00) 12 1.000 (25.4) .980 (24.9) .390 (9.90) .491 (12.5) .236 (6.00) 14 1.125 (28.6) 1.100 (27.9) .512 (13.0) .565 (17.5) .236 (6.00) 16 1.250 (31.8) 1.224 (31.1) .637 (16.2) .690 (19.5) .276 (7.01) 18 1.375 (34.9) 1.348 (34.2) .757 (19.2) .769 (21.4) .335 (8.51) 20 1.500 (38.1) 1.469 (37.3) .881 (22.4) .894 (22.7) .394 (10.0) 22 1.625 (41.3) 1.581 (40.2) 1.006 (25.6) 1.019 (25.9) .394 (10.0) 24 1.750 (44.5) 1.690 (42.9) 1.131 (28.7) 1.134 (28.8) .591 (15.0) table iv: boot material selection guide attribute type 1 high-performance semi-rigid elastomer type 2 zero-halogen semi-rigid polyolefn type 3 general purpose flexible polyolefn continuous operating temp. -75 to +150 c -30 to +135 c -55 to +135 c resistence to fuels, oils excellent very good good low toxicity, zero halogen no yes no termination area free of cadmium n after unrestricted shrinkage g b drop-in banding adapter detail b finish xn
|
