View AUIPS2031R_7881538.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

automotive grade AUIPS2031R 1 www.irf.com ? 20 13 international rectifier a p ril 25, 2013 intelligent power low side switch features ? over temperature shutdown ? over current shutdown ? active clamp ? low current & logic level input ? esd protection ? optimized turn on/off for emi ? diagnostic on the input current description the au ips2031r is a three te rminal intelligent power switch (ips) that features a low side mosfet with over - current, over - temperature, esd protection and drain to source active clamp. this device offers protections and the high reliability required in harsh environments. the switch p rovides efficient protection by turning off the power mosfet when the temperature exceeds 165c or when the drain current reaches 15a . the device restarts once the input is cycled. a serial resistance connected to the input provides the diagnostic. the ava lanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations. product summary rds(on) 60m ? ( max.) vclamp 68v ishutdown 10a (min.) packages dpak AUIPS2031R typical connection s control in input r d load +bat input signal v diag 1 2 3
AUIPS2031R 2 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 qualification information ? qualification level automotive (per aec - q100 ?? ) comments: this family of ics has pa ssed an automotive qualification. ir?s industrial and consumer qualification level is granted by extension of the higher automotive level. moisture sensitivity level dpak - 3l msl1, 260c (per ipc/jedec j - std - 020 ) esd machine model class m 3 (+/ - 400v) (pe r aec - q100 - 003) human body model class h 1c ( +/ - 2000v) ( per aec - q100 - 002 ) charged device model class c4 (+/ - 1000v) (per aec - q100 - 011) ic latch - up test class ii, level a (per aec - q100 - 004) rohs compliant yes ? qualification standards can be found at international rectifier?s web site http://www.irf.com/ ?? exceptions to aec - q100 requirements are noted in the qualification report. ??? higher msl ratings may be available for the specific package types listed here. please contact your international rectifier sales representative for further information.
AUIPS2031R 3 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 absolute maximum ratings absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. (tj= - 40c..150c, vcc= 6 ..50v unless othe rwise specified). symbol parameter min. max. units vds maximum drain to source voltage - 0.3 60 v vin maximum input voltage - 0.3 6 v isd cont. max diode continuous current (limited by thermal dissipation) rth=50c/w ? 2.5 a pd maximum power dissipation (internally limited by thermal protection) w rth=50c/w ? 2.5 tj max. maximum operating junction temperature - 40 150 c maximum storage temperature - 55 150 thermal characteristics symbol parameter typ. max. units rth1 thermal resistance junct ion to ambient ips 20 3 1r d - pak std. footprint 70 ? c/w rth2 thermal resistance junction to ambient ips2 0 3 1r d - pak 1? sqr. footprint 50 ? rth3 thermal resistance junction to case ips2 0 3 1r d - pak 2.5 ? recommended operating conditions these values are g iven for a quick design. for operation outside these conditions, please consult the application notes. symbol parameter min. max. units vih high level input voltage 4 5.5 vil low level input voltage 0 0.5 ids continuous drain current, tambient=85c, t j=125c, vin=5v,rth=70c/w ? 2.3 a rin recommended resistor in series with in pin input signal voltage=5v (1) 0.5 1.5 k ? input signal voltage=4v (1) 0.5 1 max. t rise max. input signal rising time (from 10% to 90%)( 2 ) ? 0.5 s (1) input signal of th e pulse generator not the voltage on the in pin of the device . do not connect any other component on the input. ( 2 ) max. t rise is for the input signal of the pulse generator not on the in pin voltage of the device
AUIPS2031R 4 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 static electrical characteristics tj= - 40 ..150c, vcc=6..50v (unless otherwise specified) symbol parameter min. typ. max. units test conditions rds(on) on state resistance tj=25c ? 45 60 m ? vin=5v, ids= 5 a on state resistance tj=150c ? 80 110 idss1 drain to source leakage current ? 0.1 1 a vcc= 14 v, vin=0v, tj=25c idss2 drain to source leakage current ? 0.15 2 vcc= 50 v, vin=0v, tj=25c v clamp1 drain to source clamp voltage 1 63 68 ? v id= 20 ma see fig. 3 & 4 v clamp2 drain to source clamp voltage 2 ? 68 75 id= 1 a vin clamp in to sour ce pin clamp voltage 5.5 6.2 7.5 iin= 1m a vth input threshold voltage 1.1 2 2.8 id= 200 ma iin, on on state in positive current 1 0 40 80 a vin=5v iin, off off state in positive current ( after protection latched ) 12 0 250 350 switching electrical characteristics vcc=28v, resistive load= 10? , rinput=50 ? , vin=5v, tj=25c symbol parameter min. typ. max. units test conditions tdon turn - on delay time to 20% 0.5 2 5 s see figure 2 tr rise time 20% to 80% 0.2 1.4 3 tdoff turn - off delay time to 80% 3 8 12 tf fall time 80% to 20% 0.2 1.4 3 eon + eoff turn on and off energy ? 110 ? j protection characteristics tj= - 40..150c, vcc=6..50v (unless otherwise specified) symbol parameter min. typ. max. units test conditions tsd over temperature thr eshold 150 (2) 165 ? c see figure 1 isd over current threshold 10 15 20 a see figure 1 vreset in protection reset threshold 0.9 1.6 2 v treset time to reset protection 15 50 500 s vin=0v, tj=25c (2) guaranteed by design
AUIPS2031R 5 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 lead assignments functional block diagram all values are typical in s r q 6 v tj > 165c drain source 66v 1k ? i > isd 75 ? 75v 1k ? 150k ? q 20k ?
AUIPS2031R 6 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 figure 1 ? timing diagram all curves are typical values. operating in the shaded area is not recommended. vds ids vin in d s r l 0v 5v 14v + - v load rem : during active clamp, vload is negative tj isd tsd 165c ids vin ishutdown tshutdown tt reset vdiag fault normal vds ids vin 80% 20% td on tr td off tf figure 2 ? in rise time & switching definitions vds ids vin vcc vds clamp t clamp see application notes to evaluate power dissipation figure 3 ? active clamp waveforms figure 4 ? active clamp test circuit
AUIPS2031R 7 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 0% 50% 100% 150% 200% 0 1 2 3 4 5 6 figure 5 ? normalized rdson (%) vs input voltage (v) vin, input voltage (v) rds(on), drain - to - source on resistance (normalized) 50% 100% 150% 200% -50 0 50 100 150 tj, junction temperature (c) rds(on), drain - to - source on resistance (normalized) 0 5 10 15 20 0 1 2 3 4 5 6 i limit i shutdown figure 7 ? current limitation and current shutdown vs input voltage (v) vin, input voltage (v) ids, output current 0 20 40 60 80 100 120 140 160 180 200 0 1 2 3 4 5 6 figure 8 ? over temperature shutdown (c) vs input voltage (v) tsd, over temperature shutdown (c) vin, input voltage (v) figure 6 - normalized rds(on) (%) vs tj (c)
AUIPS2031R 8 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 figure 9 ? max. continuous output current (a) vs ambient temperature (c) protection response time (s) ids, cont. output current (a) figure 10 ? ids (a) vs over temperature protection response time (s) ids, output current (a) tamb, ambient temperature (c) 0.1 1 10 100 0.01 0.1 1 10 figure 11 ? max. ou put current (a) vs inductive load (mh) ids, output current (a) inductive load (mh) figure 12 ? transient thermal impedance (c/w) vs time (s) zth, transient thermal impedance (c/w) time (s) 0 1 2 3 4 5 -50 0 50 100 150 dpak 70c/w 0.01 0.1 1 10 100 1e-5 1e-4 1e-3 1e-2 1e-1 1e+0 1e+1 1e+2 1e+3 0 5 10 15 20 0.01 0.1 1 10 100 1000 25c 125c -40c this is for single pulse when tj=165c and for repetitive pulses when tj<115c before turning off.
AUIPS2031R 9 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 figure 13 ? input current (a) on and off vs junction temperature (c) ion, ioff, input durrent (a) tj, junction temperature (c) 0 50 100 150 200 250 300 -50 0 50 100 150 iin on iin off
AUIPS2031R 10 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 case outline ? dpak
AUIPS2031R 11 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 tape & reel ? dpak
AUIPS2031R 12 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 part marking information ordering information base part number package type standard pack complete part number form quantity AUIPS2031R d - pak - 5 - lead tube 75 AUIPS2031R tape and reel 2 000 AUIPS2031Rtr tape and reel left 3 000 AUIPS2031Rtrl tape and reel right 3 000 AUIPS2031Rtrr
AUIPS2031R 13 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 important notice unless specifically designated for the automotive market, international rectifier corporation and its subsidiaries (ir) reserve the right to ma ke corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. part numbers designated with the ?au? prefix follow automotive industry and / o r customer specific requirements with regards to product discontinuance and process change notification. all products are sold subject to ir?s terms and conditions of sale supplied at the time of order acknowledgment. ir warrants performance of its hardwa re products to the specifications applicable at the time of sale in accordance with ir?s standard warranty. testing and other quality control techniques are used to the extent ir deems necessary to support this warranty. except where mandated by governmen t requirements, testing of all parameters of each product is not necessarily performed. ir assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ir components. to minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. reproduction of ir information in ir data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alterations is an unfair and deceptive business practice. ir is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ir products or serviced with statements different from or beyond the parameters stated by ir for that product or service voids all express and any implied warranties for the associated ir product or service and is an unfair and deceptive business practice. ir is not responsible or liable for any such statements. ir products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the ir product could create a situation where personal injury or death may occur. should buyer purchase or use ir products for any suc h unintended or unauthorized application, buyer shall indemnify and hold international rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ir was negligent regarding the design or manufacture of the product. only products certifie d as military grade by the defense logistics agency (dla) of the us department of defense, are designed and manufactured to meet dla military specifications required by certain military, aerospace or other applications. buyers acknowledge and agree that an y use of ir products not certified by dla as military - grade, in applications requiring military grade products, is solely at the buyer?s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection w ith such use. ir products are neither designed nor intended for use in automotive applications or environments unless the specific ir products are designated by ir as compliant with iso/ts 16949 requirements and bear a part number including the designatio n ?au?. buyers acknowledge and agree that for technical support, please contact ir?s technical assistance center http://www.irf.com/technical - info/ world headquarters: 101 n. sepulveda blvd., el segundo, california 90245 tel: (3 10) 252 - 7105
AUIPS2031R 14 www.irf.com ? 20 1 3 international rectifier a pril 25, 2013 revision history revision date notes/changes a4 march, 25 th , 2010 add tri - temp ds a5 may, 10 th 2010 update before qual a6 november, 17 th 2010 final release a7 dece mber, 7 th 2010 remove esd section page3 a8 dece mber, 9 th 2010 update qual page b june, 21 st 2012 update storage temperature c december, 3 rd 2012 update switching losses add a note figure 11 d april, 18 th 2013 update recommended input resistor

▲Up To Search▲

Price & Availability of AUIPS2031R

	To Download AUIPS2031R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .