stup06i - stup5g4 surface mount transient voltage suppressor v br : 6.8 - 440 volts p pk : 400 watts features : * 400w surge capability at 1ms * excellent clamping capability * low zener impedance * fast response time : typically less then 1.0 ps from 0 volt to v br(min.) * typical i r less then 1 m a above 10v mechanical data * case : sma molded plastic * epoxy : ul94v-o rate flame retardant * lead : lead formed for surface mount * polarity : color band denotes cathode end except bipolar. * mounting position : any * weight : 0.064 grams devices for bipolar applications for bi-directional altered the third letter of type from "u" to be "b". electrical characteristics apply in both directions maximum ratings rating at 25 c ambient temperature unless otherwise specified. rating symbol value unit peak power dissipation at ta = 25 c, tp=1ms (note1) p pk 400 watts steady state power dissipation at t l = 75 c p d 1.0 watt peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (jedec method) (note 3) i fsm 40 amps. operating and storage temperature range t j, t stg - 55 to + 150 c note : (1) non-repetitive current pulse, per fig. 5 and derated above ta = 25 c per fig. 1 (2) mounted on copper lead area at 5.0 mm 2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. update : july 13, 1998 2.0 0.2 2.1 0.2 sma (do-214ac) 1.2 0.2 5.0 0.15 4.5 0.15 2.6 0.15 dimensions in millimeter 1.1 0.3 0.2 0.07
electrical characteristics rating at = 25 c ambient temperature unless otherwise specified breakdown voltage @ it working peak maximum maximum maximum maximum ( note 1 ) reverse reverse leakage reverse clamping temperature type voltage @ v rwm current voltage @ i rsm co-efficient v br (v) it v rwm i r i rsm v rsm of v br min. max. (ma) (v) ( m a) (a) (v) (% / c) stup06i 6.12 7.48 10 5.50 1000 38.0 10.8 0.057 stup56i 6.45 7.14 10 5.80 1000 40.0 10.5 0.057 stup07f 6.75 8.25 10 6.05 500 36.0 11.7 0.061 stup57f 7.13 7.88 10 6.40 500 37.0 11.3 0.061 stup08c 7.38 9.02 10 6.63 200 33.0 12.5 0.065 stup58c 7.79 8.61 10 7.02 200 35.0 12.1 0.065 stup09b 8.19 10.0 1.0 7.37 50 30.0 13.8 0.068 stup59b 8.65 9.55 1.0 7.78 50 31.0 13.4 0.068 stup010 9.00 11.0 1.0 8.10 10 28.0 15.0 0.073 stup510 9.50 10.5 1.0 8.55 10 29.0 14.5 0.073 stup011 9.90 12.1 1.0 8.92 5.0 26.0 16.2 0.075 stup511 10.5 11.6 1.0 9.40 5.0 27.0 15.6 0.075 stup012 10.8 13.2 1.0 9.72 5.0 24.0 17.3 0.078 stup512 11.4 12.6 1.0 10.2 5.0 25.0 16.7 0.078 stup013 11.7 14.3 1.0 10.5 5.0 22.0 19.0 0.081 stup513 12.4 13.7 1.0 11.1 5.0 23.0 18.2 0.081 stup015 13.5 16.5 1.0 12.1 5.0 19.0 22.0 0.084 stup515 14.3 15.8 1.0 12.8 5.0 20.0 21.2 0.084 stup016 14.4 17.6 1.0 12.9 5.0 18.0 23.5 0.086 stup516 15.2 16.8 1.0 13.6 5.0 19.0 22.5 0.086 stup018 16.2 19.8 1.0 14.5 5.0 16.0 26.5 0.088 stup518 17.1 18.9 1.0 15.3 5.0 17.0 25.5 0.088 stup020 18.0 22.0 1.0 16.2 5.0 14.0 29.1 0.090 stup520 19.0 21.0 1.0 17.1 5.0 15.0 27.7 0.090 stup022 19.8 24.2 1.0 17.8 5.0 13.0 31.9 0.092 stup522 20.9 23.1 1.0 18.8 5.0 14.0 30.6 0.092 stup024 21.6 26.4 1.0 19.4 5.0 12.0 34.7 0.094 stup524 22.8 25.2 1.0 20.5 5.0 13.0 33.2 0.094 stup027 24.3 29.7 1.0 21.8 5.0 11.0 39.1 0.096 stup527 25.7 28.4 1.0 23.1 5.0 11.2 37.5 0.096 stup030 27.0 33.0 1.0 24.3 5.0 10.0 43.5 0.097 stup530 28.5 31.5 1.0 25.6 5.0 10.0 41.4 0.097 stup033 29.7 36.3 1.0 26.8 5.0 9.0 47.7 0.098 stup533 31.4 34.7 1.0 28.2 5.0 9.0 45.7 0.098 stup036 32.4 39.6 1.0 29.1 5.0 8.0 52.0 0.099 stup536 34.2 37.8 1.0 30.8 5.0 8.4 49.9 0.099 stup039 35.1 42.9 1.0 31.6 5.0 7.4 56.4 0.100 stup539 37.1 41.0 1.0 33.3 5.0 7.8 53.9 0.100 stup043 38.7 47.3 1.0 34.8 5.0 6.8 61.9 0.101 stup543 40.9 45.2 1.0 36.8 5.0 7.1 59.3 0.101 stup047 42.3 51.7 1.0 38.1 5.0 6.2 67.8 0.101 stup547 44.7 49.4 1.0 40.2 5.0 6.5 64.8 0.101 stup051 45.9 56.1 1.0 41.3 5.0 5.7 73.5 0.102 stup551 48.5 53.6 1.0 43.6 5.0 6.0 70.1 0.102 stup056 50.4 61.6 1.0 45.4 5.0 5.2 80.5 0.103 stup556 53.2 58.8 1.0 47.8 5.0 5.5 77.0 0.103 stup062 55.8 68.2 1.0 50.2 5.0 4.7 89.0 0.104
electrical characteristics rating at = 25 c ambient temperature unless otherwise specified breakdown voltage @ it working peak maximum maximum maximum maximum ( note 1 ) reverse reverse leakage reverse clamping temperature type voltage @ v rwm current voltage @ i rsm co-efficient v br (v) it v rwm i r i rsm v rsm of v br min. max. (ma) (v) ( m a) (a) (v) (% / c) stup562 58.9 65.1 1.0 53.0 5.0 5.0 85.0 0.104 stup068 61.2 74.8 1.0 55.1 5.0 4.3 98.0 0.104 stup568 64.6 71.4 1.0 58.1 5.0 4.6 92.0 0.104 stup075 67.5 82.5 1.0 60.7 5.0 3.9 108 0.105 stup575 71.3 78.8 1.0 64.1 5.0 4.1 103 0.105 stup082 73.8 90.2 1.0 66.4 5.0 3.6 118 0.105 stup582 77.9 86.1 1.0 70.1 5.0 3.7 113 0.105 stup091 81.9 100 1.0 73.7 5.0 3.2 131 0.106 stup591 86.5 95.5 1.0 77.8 5.0 3.4 125 0.106 stup0b0 90.0 110 1.0 81.0 5.0 2.9 144 0.106 stup5b0 95.0 105 1.0 85.5 5.0 3.1 137 0.106 stup0b1 99.0 121 1.0 89.2 5.0 2.7 158 0.107 stup5b1 105 116 1.0 94.0 5.0 2.8 152 0.107 stup0b2 108 132 1.0 97.2 5.0 2.4 173 0.107 stup5b2 114 126 1.0 102 5.0 2.5 165 0.107 stup0b3 117 143 1.0 105 5.0 2.2 187 0.107 stup5b3 124 137 1.0 111 5.0 2.3 179 0.107 stup0b5 135 165 1.0 121 5.0 2.0 215 0.108 stup5b5 143 158 1.0 128 5.0 2.0 207 0.108 stup0b6 144 176 1.0 130 5.0 1.8 230 0.108 stup5b6 152 168 1.0 136 5.0 1.9 219 0.108 stup0b7 153 187 1.0 138 5.0 1.7 244 0.108 stup5b7 162 179 1.0 145 5.0 1.8 234 0.108 stup0b8 162 198 1.0 146 5.0 1.6 258 0.108 stup5b8 171 189 1.0 154 5.0 1.7 246 0.108 stup0d0 180 220 1.0 162 5.0 1.5 287 0.108 stup5d0 190 210 1.0 171 5.0 1.53 274 0.108 stup0d2 198 242 1.0 175 5.0 1.16 344 0.108 stup5d2 209 231 1.0 185 5.0 1.22 328 0.108 stup0d5 225 275 1.0 202 5.0 1.11 360 0.110 stup5d5 237 263 1.0 214 5.0 1.16 344 0.110 stup0e0 270 330 1.0 243 5.0 0.93 430 0.110 stup5e0 285 315 1.0 256 5.0 0.97 414 0.110 stup0e5 315 385 1.0 284 5.0 0.79 504 0.110 stup5e5 332 368 1.0 300 5.0 0.83 482 0.110 stup0g0 360 440 1.0 324 5.0 0.70 574 0.110 stup5g0 380 420 1.0 342 5.0 0.73 548 0.110 stup0g4 396 484 1.0 356 5.0 0.95 631 0.110 stup5g4 418 462 1.0 376 5.0 1.00 602 0.110 note: ( 1 ) v br measured after it applied for 300 m s., it = square wave pulse or equivalent. ( 2 ) v f = 3.5 vmax., i f = 25 amps. ( 6.8 volts thru 91volts ) v f = 5.0 vmax., i f = 25 amps. ( 100 volts thru 440 volts ) per 1/2 square or equivalent sine wave. pw = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) for bipolar types moving v r of 10 volts and under, the i r limit is doubled. ( 4 ) "stu" will be omitted in marking on the diode.
rating and characteristic curves ( stup06i - stup5g4 ) fig.1 - pulse derating curve fig.2 - maximum non-repetitive surge current 0 25 50 75 100 125 150 175 ta, ambient temperature, ( c) number of cycles at 60hz fig.3 - steady state power derating fig.4 - pulse rating curve fig.5 - pulse waveform 0 1.0 2.0 3.0 4.0 80 60 40 20 120 1.00 100 10 40 0 60 0 30 20 10 0.25 0.75 0 0.1 0.50 1.0 tp, pulse width peak forward surge current, amperes peak pulse derating in % of peak power or current pp,peak power (kw) 100 50 10 20 60 1 2 4 6 40 100 100 125 175 0 25 50 75 150 0.1 m s 1.0 m s 10 m s 100 m s 10ms 1.0ms 200 t l , lead temperature ( c) single phase half wave 60 hz resistive or inductive load 8.3 ms single half sine wave jedec method p d , steady state power dissipation (watts) 50 100 0 tr = 10 m s peak value i rms half value - i rms 2 t j =25 c pulse width (tp) is defined as that point where the peak current decays to 50% of i rsm tp 10x1000 waveform as defined by r.e.a. t, time(ms) peak pulse current - % i rms
|
