oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2010 oscilent controlled document ordering code / part number product description 805-rf246.0m-a low-loss, rf saw filter specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency performance notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 805-rf246.0m-a january 2010 rev a low-loss, rf saw filter product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit source impedance: 200 ? load impedance: 50 ? pin description c, d, e, g, h ground a, b in fout
oscilent part number 805-rf246.0m-a january 2010 rev a low-loss, rf saw filter product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -25 - +85 storage temperature range c -40 - +85 maximum dc voltage v - - 0 maximum input power dbm - - 0 source impedance (balanced ended) (1) ? - 200 - load impedance (single ended) (1) ? - 50 - notes: no matching network electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 246.0 - maximum insertion loss in 245.5 ~246.5 mhz db - 1.5 2.5 amplitude ripple in 245.5 ~ 246.5 mhz db - 0.2 0.4 group delay ripple in 245.5 ~246.5 mhz ns - 15 50 stop band attenuation: 100.0 ~ 226.0 mhz db 40 60 - 226.0 ~ 236.0 mhz db 7 48 - 256.0 ~ 266.0 mhz db 7 25 - 266.0 ~ 268.0 mhz db 25 40 - 268.0 ~ 500.0 mhz db 35 40 -
oscilent part number 805-rf246.0m-a january 2010 rev a low-loss, rf saw filter product specification p. 3 www.oscilent.com frequency performance
|
