wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 1 of 5 datasheet rev. e psge150 series 88~132vac / 176~264vac (248~373vdc) input single outputs up to 158.4 watts output power ac/dc switching power supplies features ? single output ? rohs compliant ? input selected by switch ? high efficiency, long life, and high reliability ? 10% output voltage adjustability ? green design, no-load power consumption < 1w ? energy star compliant ? cooling by free air convection ? power on with led indicator ? all using 105c long life electrolytic capacitors ? wide operating temperature range: -25c to +70c ? 100% full load burn-in tested ? withstand 2g vibration test ? brown-out (low ac input voltage) protection ? over voltage, over load, and short circuit protection description the psge150 series of ac/dc switching power supplies offers up to 158.4 watts of output power in a 7.05? x 3.86? x 1.50? enclosed case. this series has an 88~132vac / 176~264vac input voltage range (selected by switch) and single outputs of 5, 12, 15, 24, and 48vdc. some features include high efficiency up to 90%, 10% output adjustability, no-load power consumption < 1w, and a high operating temperature range of -25c to +70c. this series also has over voltage, short circuit, over load, and brown-out (l ow ac input voltage) protection. all m odels have been 100% full load burn-in tested and are rohs and energy star compliant. this series also has ul 60950-1, tuv en60950-1, and ce safety approvals.
rev. e psge150 series single output up to 158.4 watts ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 2 of 5 specifications: psge150 series all specifications are based on 25c, nominal input volta ge, and maximum output curre nt unless otherwise noted. we reserve the right to change specifi cations based on technological advances. input specifications input voltage range 88~132vac / 176~264vac selected by switch (wit hstand 300vac surge for 5 sec. without damage) 248~373vdc input frequency 50hz / 60hz ac current 3a typ. at 115vac; 1.5a typ. at 230vac inrush current cold start 40a typ. at 230vac output specifications output voltage see table output power see table voltage adjustment range 10% voltage tolerance 5v output model: 2% 12v, 15v, 24v,and 48v output models: 1% line regulation (ll to hl at full load) 0.5% load regulation (0% to 100% full load) 5v output model: 1.0% 12v, 15v, 24v,and 48v output models: 0.5% output current see table ripple & noise (max.) see table setup, rise time (see note 3) < 200ms, < 100ms at 115vac and full load; < 200ms, < 100ms at 230vac and full load hold-up time > 25ms at 115vac and full load; > 25ms at 230vac and full load temperature coefficient 0.03% / c (0~50c) protection over voltage protection 115%~150% rated output voltage protection type: latch-off mode over load protection > 105% rated output power protection type: hiccup mode, recovers automa tically after fault condition is removed. general specifications efficiency (at 230vac) see table input to output 3000vac (4242vdc) for 1 minute input to fg 1500vac (2121vdc) for 1 minute withstand voltage output to fg 500vac (707vdc) for 1 minute isolation resistance 100m ? /500vdc (input to output, input to fg, output to fg) leakage current < 2ma at 240vac environmental specifications working temperature -25c to +70c (refer to de-rating curve) storage temperature -40c to +85c working humidity 20% to 90% rh (non-condensing) storage humidity 10% to 95% rh vibration 10 ~ 500hz, 2g 10min/1cycle, pe riod of 60 min. each along x,y,z axis. cooling free air convection mtbf 620,300 hours compliance: mil-hdbk-217f physical specifications weight, packing 19.75oz (560g); 20pcs/13kg dimensions (l x w x h) 7.05 x 3.86 x 1.50 inches (179.00 x 98.00 x 38.00 mm) safety & emc safety standards ul 60950-1 2 nd edition, tuv en60950- 1: 2006+a11 approved emi conduction & radiation en55022: 2006 class b harmonic current en61000-3-2: 2006 class a, en61000-3-3: 1995+a1: 2001+a2: 2005 ems immunity en61204-3: 2000 en55024: 1998+a1: 2001+a2: 2 003 light industry level, criteria a
rev. e psge150 series single output up to 158.4 watts ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 3 of 5 model selection table model number input voltage range output voltage output current ripple & noise (1) output power efficiency psge-150-5 5 vdc 18a 100mvp-p 90w 83% psge-150-12 12 vdc 12.5a 120mvp-p 150w 88% PSGE-150-15 15 vdc 10a 120mvp-p 150w 89% psge-150-24 24 vdc 6.5a 120mvp-p 156w 90% psge-150-48 88~132vac / 176~264vac (248 ~ 373vdc) 48 vdc 3.3a 200mvp-p 158.4w 90% notes 1. ripple & noise is measured at 20mhz bandwidth by using a 12 " twisted pair-wire terminated with a 0.1f capacitor and a 47f capacitor in parallel. 2. tolerances include set up tolerance, line regulation, and load regulation. 3. length of the setup time is measured at first cold start. tu rning the power supply on and off very quickly may lead to an increase in the setup time. 4. the power supply is considered a component, which will be in stalled into final equipment. the final equipment must be re-confirmed that it still meets emc directives. derating curves 90 ta=25c 100 110 120 264 40 50 60 70 80 load (%) input voltage (vac) 90 100 -25 ambient temperature (c) 0 10203040506070 20 40 60 80 100 load (%) load vs temperature load vs input voltage
rev. e psge150 series single output up to 158.4 watts ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 4 of 5 mechanical drawings tolerance: 0.02? (0.5mm) top of case unit: inches (mm) bottom of case unit: inches (mm) tolerance: 0.02? (0.5mm) 1.79 (45.50) 0.67 (17.00) 0.20 (5.00) 0.06 (1.50) ?0.18 (?4.50) 0.19 (4.75) 0.21 (5.45) 0.14 (3.50) 0.24 (6.20) 1.44 (36.50) 0.34 (8.75) 0.23 (5.75) 0.13 (3.25) 0.18 (4.50) 0.18 (4.50) 6.87 (174.50) 6.26 (159.00) 3.74 (95.00) 0.18 (4.50) 0.28 (7.00) 0.13 (3.25) 0.40 (10.25) 0.56 (14.25) 0.19 (4.75) 3.80 (96.50) 3.84 (97.50) 3.86 (98.00) 0.22 (5.5) 0.14 (35.00) 0.25 (6.25) 2.03 (51.50) 2.56 (65.00) m3nut m3*6l 7.05 (179.00) 0.20 (5) 0.20 (5) 0.20 (5) 0.20 (5) 0.14 (3.5) 0.42 (10.75) 3.86 (98.00) 2.52 (64.00) 0.65 (16.40) 0.51 (12.9) 0.19 (4.75) 0.14 (3.5) 2.32 (59.00) 0.06 (1.5) 0.67 (17.00) 0.26 (6.5) 0.24 (6) 1.50 (38.00) 0.79 (20.00) ?0.13 (?3.2) 0.71 (18.00) 2.43 (61.75) 0.67 (17.00) 0.22 (5.5) ?0.13 (?3.2) ?0.28 (?7) x 4 m3nut (x3) 1.57 (40.00) 0.22 (5.5) 1.48 (37.5) 0.71 (18) 0.01 (0.25) 0.27 (6.85) 0.15 (3.75)
rev. e psge150 series single output up to 158.4 watts ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 5 of 5 mechanical drawing tolerance: 0.02? (0.5mm) unit: inches (mm) ?0.14 (?3.5) 0.33 (8.30) 0.37 (9.50) 0.20 (5.00) 0.20 (5.00) 7.05 (179.00) 2.56 (65.00) 2.46 (62.50) l=4 2-m4 1.38 (35.00) ?0.14 (?3.5) 0.08 (2.00) 0.27 (6.75) 3.86 (98.00) l n -v -v +v +v (ac) 0.35 (9.00) 0.26 (6.50) 0.73 ?0.14 (?3.5) (18.50) 0.87 (22.00) 4.61 (117.00) 3-m3 ?0.14 (?3.5) 0.28 (7.00) 0.08 (2.00) 0.71 (18.00) 1.50 (38.00) 0.35 (9.00) company information wall industries, inc. has created custom and modified units for over 50 years. our in-house research and development engineers will provide a solution that exceeds your perfo rmance requirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to produc ing a high quality, well-documented product for our customers. our past projects demonstrate our commitment to you, our cu stomer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and f unction requirements. we will continue to provide ongoing support for your project a bove and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone : ? (603)778-2300 toll free : ? (888)587-9255 fax : ? (603)778-9797 e-mail : sales@wallindustries.com web : www.wallindustries.com address : 5 watson brook rd. exeter, nh 03833
|
