View T529P476M006AAE200_8107243.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 1 benefts ? polymer cathode technology ? substrate termination ? eia case size: 2012 (0805 mlcc equivalent) ? low profle: 1.0 mm maximum ? non-ignition failure mode ? improved volumetric effciency ? self-healing mechanism ? capacitance: 22 uf to 150 uf ? use up to 90% of rated voltage (10% derating) ? voltage: 6.3 v and 10 v ? rohs compliant and halogen free ? 105c maximum temperature capability ? lead free 260c refow capable applications typical applications include densely populated circuits where space restrictions do not allow for larger and more commonly available case sizes such as smart phones, digital cameras, mp3 players, gps navigation systems, wifi modules, analytical and test equipment, and audio/sound circuits. overview the kemet low esr polymer series is a tantalum capacitor with a ta anode and ta 2 o 5 dielectric. a conductive organic polymer replaces the traditionally used mno 2 as the cathode plate of the capacitor. this results in very low esr and improved capacitance retention at high frequency. the ko- cap also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard mno 2 tantalum types. ko-caps may also be operated at voltages up to 90% of rated voltage for part types with rated voltages of 10 volts and up to 80% of rated voltage for part types > 10 volts with equivalent or better reliability than traditional mno 2 tantalum capacitors operated at 50% of rated voltage. the t529 series ko-cap uses a substrate termination design, which results in the most volumetrically effcient packaging technology available today in polymer tantalum chip capacitors. this series offers high capacitance values in a small 2012-10 (2.0 mm (l) x 1.2 mm (w) x 1.0 mm (h)) package size. the t529 series is ideal for use in densely populated circuits such as smart phones and digital cameras where space restrictions do not allow for larger and more commonly available case sizes. kemet organic capacitor (ko-cap) t529 series small case size substrate terminal polymer tantalum environmental compliance rohs compliant (6/6) according to directive 2002/95/ec. halogen free. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 2 2 ordering information t 529 p 476 m 006 a a e200 capacitor class series case size capacitance code (pf) capacitance tolerance voltage failure rate/ design lead material esr code t = tantalum 529 = substrate terminal polymer p = 2012-10 i = 3216-10 first two digits represent signifcant fgures. third digit specifes number of zeros. e.g., 476 = 47 f m = 20% 006 = 6.3 v 010 = 10 v a = n/a a = ni - au e = esr last three digits specify esr in m (200 = 200 m) performance characteristics item specifcations operating temperature -55c to 105c rated capacitance range 22 f to 150 f @ 120 hz/25c capacitance tolerance m tolerance (20%) rated voltage range 6.3 v and 10 v df (120 hz) refer to part number electrical specifcation table esr (100 khz) refer to part number electrical specifcation table leakage current refer to part number electrical specifcation table kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 3 3 qualifcation test condition/characteristics endurance 85c @ rated voltage, 1,000 hours c/c within initial c/c limits df within 1.5 x initial limits dcl within 3.0 x initial limits damp heat steady state 40c, 90 to 95% rh, 500 hours c/c -20% to +30% of initial c/c limit df within 1.5 x initial limits dcl within 3.0 x initial limits temperature stability extreme temperature exposure at -55c and +105c +25c -55c +105c c/c i l* -20% to 0% of c/c -50% - 0% of c/c df il il il dcl il il 1.25 cv surge voltage 1.3 vr, 85c, 1,000 resistor, 1,000 cycles c/c within initial c/c limits df within initial limit dcl within initial limit mechanical shock 100 g, saw-tooth wave c/c within initial c/c limits c/c within initial c/c limits df within initial limit dcl within initial limit terminal strength strength: 4.9 n, time: 10 0.5 seconds (two directions) visual no evidence of mechanical damage *il = initial limit dimensions C millimeters case size component kemet eia l w h f s p 2012C10 2.0 0.1 1.25 0.1 1.0 maximum 0.9 0.1 0.55 0.1 i 3216C10 3.2 0.2 1.6 0.2 1.0 maximum 1.2 0.1 0.8 0.1 kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 4 4 table 1 C ratings & part number reference rated voltage rated capacitance case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity rated temp. vdc f kemet/eia (see below for part options) a @ +25 o c maximum/ 5 minutes % @ +25 o c 120 hz maximum m @ +25oc 100 khz maximum (ma) +45 o c 100 khz temp 260 o c c 6.3 22 p/2012-10 t529p226m006aae200 22.0 6 200 548 3 105 6.3 47 p/2012-10 T529P476M006AAE200 29.6 6 200 510 3 105 6.3 47 p/2012-10 t529p476m006aae150 29.6 6 150 590 3 105 6.3 150 i/3216-10 t529i157m006aae200 283.5 10 200 548 3 105 6.3 150 i/3216-10 t529i157m006aae100 283.5 10 100 775 3 105 6.3 150 i/3216-10 t529i157m006aae070 283.5 10 70 926 3 105 10 22 p/2012-10 t529p226m010aae200 33.0 6 200 354 3 105 10 47 p/2012-10 t529p476m010aae200 141.0 6 200 510 3 105 refer to ordering information for additional detail. under development derating guidelines voltage rating -55c to 85c 85c to 105c maximum recommended steady state voltage maximum recommended transient voltage (1 ms C 1 s) maximum recommended steady state voltage maximum recommended transient voltage (1 ms C 1 s) 10 v 90% of v r v r see chart see chart v r = rated voltage 50% 60% 70% 80% 90% 100% 110% -55 25 85 105 maximum transient voltage recommended application voltage 72% 80% kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 5 5 ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: 1. the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. 2. the negative peak ac voltage in combination with bias voltage, if any, must not exceed the allowable limits specifed for reverse voltage. see the reverse voltage section for allowable limits. the maximum power dissipation by case size can be determined using the table at right. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the table below for temperature compensation requirements. temperature compensation multipliers for maximum power dissipation t 45c 45c < t 85c 85c < t 105c using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = e(max) = z r = esr at specifed frequency (ohms) z = impedance at specifed frequency (ohms) case code eia case code maximum power dissipation (p max) mwatts @ 45c with +30c rise i 3216 60 p 2012 25 the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 6 6 reverse voltage polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. these devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. temperature permissible transient reverse voltage 25c 15% of rated voltage 55c 10% of rated voltage 85c 5% of rated voltage 105c 3% of rated voltage 125c* 1% of rated voltage *for series rated to 125c table 2 C land dimensions/courtyard kemet metric size code dimensions in mm case eia g maximum z minimum x minimum y ref i 3216C10 1.65 3.25 1.10 0.80 p 2012C10 1.05 2.05 0.80 0.50 kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 7 7 t i m e t e m p e r a t u r e t s m i n 2 5oc to peak t l t s 2 5 t p t s m a x t l t p m a x imum r a m p u p r a t e = 3oc/seconds m a x imum r a m p d o w n r a t e = 6oc/seconds soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the gold- colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y, and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w, and z construction kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 8 8 capacitor marking polarity indicator (+) voltage and capacitance code date code* date code * jan feb mar apr may jun jul aug sep oct nov dec 2013 a b c d e f g h j k l m 2014 n p q r s t u v w x y z 2015 a b c d e f g h j k l m 2016 n p q r s t u v w x y z code j a rated voltage 6 v 10 v code j s a capacitance 22 47 100 storage all ko-cap series are shipped in moisture barrier bags with a desiccant and moisture indicator card. these series are classifed as msl3 (moisture sensitivity level 3). product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 30c and humidity not in excess of 60% rh. kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 9 9 tape & reel packaging information kemets molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481C1 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity kemet case codes tape and reel dimensions tape width (mm) 180 mm (7" diameter) i 3216 8 3,000 p 2012 8 3,000 (quantity per reel) top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 10 10 figure 1 C embossed (plastic) carrier tape dimensions p o t f w c en t er li n e s of cav i t y a o b o u s e r d i r e c t i o n o f u n r e elin g c ov er t ap e k o b 1 i s f or t ap e f e ed er r e f e r ence onl y, i ncl u di ng dr a ft con c en t r i c a bou t b o . t 2 ? d 1 ? d o b 1 s 1 t 1 e 1 e 2 p 1 p 2 e m b os s m e nt f or c a v i t y s i z e , s e e n o t e 1 t a b l e 4 [ 1 0 p i t c h e s c um u l at i v e t ol er a n c e o n t a p e 0. 2 m m ] 7deoh2(pervvhg3odvwlf&duulhu7dsh'lphqvlrqv metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 5). < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a , b and k shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements. kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 11 11 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation a o b o t s maxi m u m c ompone n t r o t a tio n t op v i e w m a x i mum c o mponent r o t a t ion s ide v i e w t a p e m axi m u m width (mm) r otati o n ( t ) 8,12 2 0 16 ? 200 1 0 t a p e m a x i m u m widt h ( mm) r o tati o n ( s ) 8,12 20 16 ? 56 1 0 72 ? 200 5 t y p ic a l p o c k e t cente r line t y p i c a l c o m pon e n t c e n t e r l i n e figure 3 C maximum lateral movement 0 . 5 m m m a x i mum 0 . 5 m m m a x i mum 8 m m & 1 2 m m tape 1 . 0 m m m a x i mum 1 . 0 m m m a x i mum 1 6 m m t a p e figure 4 C bending radius r r b end i n g r a d i u s e mbo ssed c a r r i e r p unc hed c a rrier kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 12 12 figure 5 C reel dimensions a d (see n o te ) full r a d i us, see n o t e b ( s ee note) access h o le at s l o t loc a ti on (? 40 m m mi nimum) i f p r es en t, tape slot i n core for t ape start: 2.5 mm minimum wi dt h x 10.0 mm mi n imum dep th w 3 (incl u des flan g e dis to r tion at out e r e dge) w 2 ( m eas u re d a t hub ) w 1 ( m eas u re d a t hub ) c (arbor hol e di a m e ter ) note: driv e spok es o ptiona l ; if u s ed, d i mensi o ns b an d d shall a pply. n 7deoh25hho'lphqvlrqv metric will govern constant dimensions millimeters (inches) variable dimensions millimeters (inches) kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 13 13 figure 6 C tape leader & trailer dimensions t r a i le r 160 mm min imum c a r r i e r t ape e n d s t a r t r o und s p rocke t h o l e s e l ongated s p r o cke t h o l e s ( 32 mm tape and w i der ) t op c o ver t ape top c over t ape p unched c a r r i e r 8 mm & 12 m m o n l y e mboss ed c a r r i e r c o m p o n e n t s 1 0 0 m m m i n imum leader 4 0 0 mm m i n i m u m figure 7 C maximum camber c a r r i e r t a p e r o u n d s p r o c k e t h ol e s 1 m m max i m u m , e i t h e r d i r e c t i o n s t r ai gh t edge 2 5 0 m m e l o n g a t ed s p r oc k e t h ol e s ( 32 m m & w ide r t a pes ) kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 14 14 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2070_t529 ? 12/6/2013 15 15 other kemet resources tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet organic capacitor (ko-cap) C t529 series small case size substrate terminal polymer tantalum

▲Up To Search▲

Price & Availability of T529P476M006AAE200

	To Download T529P476M006AAE200 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .