isometric isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100sp3t8b13vs2reh 2:1 4/7/2010 ST113059 b blr 1 1 a 17981 released for production 2/25/08 blr note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. contact material: gold 5. rating: 0.4 (va) max. @ 20v (ac or dc) 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk t100004 - hexnut - qty 2 t100012 - lockwasher - qty 1 t100003 - lockring - qty 1 pos. 1 pos. 2 pos. 3 switch function off on on 2-3 open 2-1 2 1 3 circuit: spdt 25 ~ pos. 1 pos. 2 pos. 3 e-switch marking on opposite side 1 2 3 3 epoxy seal 11.38 [.448 in] 18.00 [.709 in] 1.65 [.065 in] .79 [.031 in] 4.70 [.185 in] n 6.09 [.240 in] 15.75 [.620 in] 11.68 [.460 in] 1.22 [.048 in] 3.18 [.125 in] 8.13 [.320 in] .76 [.030 in] .51 [.020 in] 15/32-32 uns-2a threads 4.70 [.185 in] 15.75 [.620 in] 3.18 [.125 in] n 1.85 [.073 in] p.c. mounting 1.27 [.050 in] 4.70 [.185 in] .51 [.020 in] b 19003 revise dim for actuator height 4/7/10 blr b rating
|