note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: PM0012H doc spa513 series 1 amp, 15,000 to 20,000 volts high voltage rectifier bridge solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet features: ? aerospace high voltage power supply applications ? multiple high voltage transformer rectification ? high voltage multiplier design using external capacitors ? low mechanical stress design ? excellent thermal resistance : 2.5oc/w ? tx, txv, and space level screening available consult factory for: ? higher blocking voltages ? faster switching times ? other electrical configurations ? available with a sandblasted case to promote adhesion add ?sab? suffix part number/ordering information 1/ spa513- __ __ __ finish __ = standard case sab = sand blasted case screening 2 / __ = not screened tx = tx level txv = txv level s = space level dash number 3 / electrical characteristics , each bridge leg, @ t a = 25oc (unless otherwise specified) parameter symbol min max unit instantaneous forward voltage drop (i f = 1.0 a, 300 sec pulse minimum) v f1 ? 7.5 v reverse leakage (v r = 2.5 kv, 300 sec pulse minimum) t a = 25oc t a = 100oc i r1 i r2 ? ? 1.0 50 a insulation resistance spa513-02, -03, -04: all terminals to base @ 15 kv spa513-05, -06: all terminals to base @ 20 kv r insul 10 ? ? g ? reverse recovery time (i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a) t rr ? 60 nsec notes: 1/ for ordering information, pr ice, and availability- contact factory. 2/ screened based on mil-prf-19500. screening flows available on request. 3/ for each dash number, refer to v r ( module ) rating, schematic, and outline. maximum ratings characteristic symbol value unit peak repetitive reverse and dc blocking voltage 3/ (module) spa513-02 spa513-03 spa513-04 spa513-05 spa513-06 (br1) spa513-06 (br2) v r (module) 15 17.5 20 20 12.5 10 kv peak repetitive reverse and dc blocking voltage (each bridge) t c = 55oc v r 3.3 kv average rectified forward current (non-repetitive, t = 8.3 msec pulse) i o 1 a peak surge current (non-repetitive, t = 8.3 msec pulse, t a = 25oc) i fsm 25 a storage & operating temperature range t op & t stg -65 to +150 oc thermal resistance, junction to base r jb 2.5 oc/w
note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: PM0012H doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com spa513 series spa513-02 spa513-03 tolerances (unless specified): .xx .03 .xxx .010 tolerances (unless specified): .xx .03 .xxx .010
note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: PM0012H doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com spa513 series spa513-04 slot .040 x .030 typ e9 a c e7 d e f h k l m n e1 e2 e3 e4 b e11 e5 .185 #4-40 unc-2b .170 min lng 4 places (back side) .84 .900 2.13 10x .18 (=1.80) .165 .150 2.200 .15 .675 1.200 2.50 aspm tolerances (unless specified): .xx .03 .xxx .010 spa513-05 tolerances (unless specified) : .xx .03 .xxx .010
note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: PM0012H doc ? solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com spa513 series ? spa513-06 tolerances (unless specified) : .xx .03 .xxx .010 ? ?
|