View HMC743ALP6CE_8062006.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

analog devices welcomes hittite microwave corporation no content on the attached documen t has changed www.analog.com www.hittite.com
this page intentionally left blank
variable gain amplifiers - digital - smt 1 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz functional diagram electrical specifcations, t a = +25 c, 50 ohm system vdd = +5v, vcc = +5v the HMC743ALP6CE is ideal for: ? cellular/3g infrastructure ? wibro, wimax & lte/4g ? microwave radio & vsat ? test equipment and sensors ? if & rf applications -45 to +18 db gain control in 0.5 db steps power-up state selection high output ip3: +33 dbm ttl/cmos compatible serial control 0.25 db typical gain step error single +5v supply 40 lead 6x6 mm smt package: 36 mm 2 the HMC743ALP6CE is a digitally controlled variable gain amplifer which operates from dc to 4 ghz, can be programmed to provide 63 db of gain control in 0.5 db steps and delivers output ip3 of up to +33 dbm. the gain control interface accepts a three wire serial input word and allows independent or simultaneous control of two 6-bit digital attenuators. the HMC743ALP6CE also features a user selectable power up state and a serial output for cascading other serially controlled hittite products. the HMC743ALP6CE is housed in an rohs compliant 6x6 mm qfn leadless package, and requires minimal external components. parameter min. typ. max. min. typ. max. units frequency range 70 - 1000 700 - 4000 mhz gain (maximum gain state) 15.5 18.5 6 13 db gain control range 63 63 db input return loss 18 19 output return loss 15 17 db gain accuracy: (referenced to maximum gain state) all gain states 70 - 350 mhz: (0.3 + 3.5%) 350 - 750 mhz: (0.3 + 5.0%) 750 - 1000 mhz: (0.3 + 4.0%) 0.7 - 1.7 ghz: (0.3 + 4.5%) 1.7 - 3.2 ghz: (0.3 + 4.0%) 3.2 - 4.0 ghz: (0.3 + 5.0%) db db db output power for 1 db compression 17. 5 17 dbm output third order intercept point (two-tone output power= 8 dbm each tone) 33 28 dbm noise figure 6 7 db switching characteristics 100 160 100 160 ns ns trise, tfall (10 / 90% rf) ton, toff (latch enable to 10 / 90% rf) supply current (idd) 5 5 ma supply current (icc) 82 102 82 102 ma typical applications features general description for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 2 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz input return loss [1] relative gain setting [1] (referenced to maximum gain state) maximum gain vs. temperature output return loss [1] bit error vs. frequency [1] bit error vs. relative gain state [1] (major frequencies) 70 to 1000 mhz tuning 10 12 14 16 18 20 22 0 0.2 0.4 0.6 0.8 1 +25 c +85 c -40 c gain (db) frequency (ghz) -70 -60 -50 -40 -30 -20 -10 0 0 0.2 0.4 0.6 0.8 1 relative gain (db) frequency (ghz) 8 db 16 db 31.5 db 63 db -40 -30 -20 -10 0 0 0.2 0.4 0.6 0.8 1 return loss (db) frequency (ghz) 31.5, 63 db 0, 0.5, 1, 2, 4 db 16 db -40 -30 -20 -10 0 0 0.2 0.4 0.6 0.8 1 return loss (db) frequency (ghz) 31.5, 63 db 4 db 0 db -2 -1 0 1 2 3 4 0 0.2 0.4 0.6 0.8 1 bit error (db) frequency (ghz) 63 db 31.5 db 16 db -1 0 1 2 3 0 8 16 24 32 40 48 56 64 bit error (db) relative gain setting (db) 0.5 ghz 0.1, 0.3, 0.7, 0.9 ghz [1] input attenuator swept for 0 - 31.5 db states and output attenuator swept for 32 - 63 db states for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 3 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz relative phase vs. frequency [1] step error vs. frequency [1] (worst case) reverse isolation [1] (major states) output p1db vs. temperature [2] output ip3 vs. temperature [2] psat vs. temperature [2] 70 to 1000 mhz tuning -20 -10 0 10 20 0 0.2 0.4 0.6 0.8 1 relative phase (deg) frequency (ghz) 63db 31.5db 16db -1 -0.5 0 0.5 1 0 0.2 0.4 0.6 0.8 1 step error (db) frequency (ghz) 20, 28, 51.5, 59.5 db 24 db 20, 39.5 db 55.5 db 8 db 16 db -100 -90 -80 -70 -60 -50 -40 -30 -20 0 0.2 0.4 0.6 0.8 1 reverse isolation (db) frequency (ghz) 31.5 db 16 db 8 db 0, 0.5, 1, 2, 4 db 63 db 14 15 16 17 18 19 20 0 0.2 0.4 0.6 0.8 1 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 16 17 18 19 20 21 22 0 0.2 0.4 0.6 0.8 1 +25 c +85 c -40 c psat (dbm) frequency (ghz) 24 28 32 36 40 0 0.2 0.4 0.6 0.8 1 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) [1] input attenuator swept for 0 - 31.5 db states and output attenuator swept for 32 - 63 db states [2] max gain state for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 4 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz noise figure vs. frequency [2] input attenuator relative attenuation [3] (major states) input attenuator bit error vs. frequency [3] (major states) input attenuator relative phase vs. frequency [3] (major states) input attenuator bit error vs. attenuation state [3] (major frequencies) output attenuator relative attenuation [4] (major states) 70 to 1000 mhz tuning 0 2 4 6 8 10 12 14 0 0.2 0.4 0.6 0.8 1 +25 c +85 c -40 c noise figure (db) frequency (ghz) -35 -30 -25 -20 -15 -10 -5 0 0 0.2 0.4 0.6 0.8 1 relative gain (db) frequency (ghz) 31.5 db 16 db 8 db 4 db 0.5, 1, 2 db -2 -1 0 1 2 0 0.2 0.4 0.6 0.8 1 bit error (db) frequency (ghz) 31.5 db 16 db -1 0 1 2 3 0 4 8 12 16 20 24 28 32 bit error (db) relative gain state (db) 0.5 ghz relative gain state (db) 0.3, 0.7, 0.9 ghz 0.5 ghz -20 -10 0 10 20 0 0.2 0.4 0.6 0.8 1 relative phase (deg) frequency (ghz) 31.5 db 16 db 0.5, 1, 2, 4, 8 db -35 -30 -25 -20 -15 -10 -5 0 0 0.2 0.4 0.6 0.8 1 relative gain (db) frequency (ghz) 31.5 db 16 db 8 db 4 db 0.5, 1, 2 db [2] max gain state [4] input attenuator set to 0 db state [3] output attenuator set to 0 db state for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 5 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz output attenuator bit error vs. frequency [4] (major states) output attenuator relative phase vs. frequency [4] (major states) output attenuator bit error vs. attenuation state [4] (major frequencies) 70 to 1000 mhz tuning -2 -1 0 1 2 0 0.2 0.4 0.6 0.8 1 bit error (db) frequency (ghz) 31.5 db 16 db -1 0 1 2 3 0 4 8 12 16 20 24 28 32 bit error (db) relative gain state (db) 0.1, 0.3 ghz 0.5, 0.7, 0.9 ghz -20 -10 0 10 20 0 0.2 0.4 0.6 0.8 1 relative phase (deg) frequency (ghz) 31.5 db 8, 16 db 0.5, 1, 2, 4 db [4] input attenuator set at 0 db state for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 6 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz maximum gain vs. temperature input return loss [1] output return loss [1] relative gain setting [1] (referenced to maximum gain state) bit error vs. frequency [1] bit error vs. relative gain state [1] (major frequencies) 0.7 to 4.0 ghz tuning 4 8 12 16 20 0.5 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c gain (db) frequency (ghz) -70 -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 relative gain (db) frequency (ghz) 63 db 31.5 db 16 db 8 db -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 return loss (db) frequency (ghz) 63 db 16 db 31.5 db 0 db -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 return loss (db) frequency (ghz) 63 db 31.5 db 0 db -2 -1 0 1 2 3 4 0.5 1 1.5 2 2.5 3 3.5 4 bit error (db) frequency (ghz) 63 db 31.5 db 16 db -1 0 1 2 3 0 8 16 24 32 40 48 56 64 bit error (db) relative gain state(db) 1.0, 2.0 ghz 3.0, 4.0 ghz [1] input attenuator swept for 0 - 31.5 db states and output attenuator swept for 32 - 63 db states for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 7 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz relative phase vs. frequency [1] step error vs. frequency (worst case) [1] output p1db vs. temperature [2] psat vs. temperature [2] output ip3 vs. temperature [2] reverse isolation [1] 0.7 to 4.0 ghz tuning -10 0 10 20 30 40 50 60 0.5 1 1.5 2 2.5 3 3.5 4 relative phase (deg) frequency (ghz) 63 db 31.5 db 16 db 8 db -1 -0.5 0 0.5 1 0.5 1 1.5 2 2.5 3 3.5 4 step error (db) frequency (ghz) 16 db 55.5 db 8 db 59.5 db 24 db -90 -80 -70 -60 -50 -40 -30 -20 0.5 1 1.5 2 2.5 3 3.5 4 reverse isolation (db) frequency (ghz) 31.5 db 16 db 8 db 4 db 0.5, 1, 2 db 63 db 4 9 14 19 24 0.5 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 4 9 14 19 24 0.5 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c psat (dbm) frequency (ghz) 10 15 20 25 30 35 40 0.5 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) [1] input attenuator swept for 0 - 31.5 db states and output attenuator swept for 32 - 63 db states [2] max gain state for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 8 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz noise figure vs. frequency [2] input attenuator relative attenuation [3] (major states) input attenuator bit error vs. frequency [3] (major states) input attenuator bit error vs. attenuation state [3] (major frequencies) output attenuator relative attenuation [4] (major steps) input attenuator relative phase vs. frequency [3] (major states) 0.7 to 4.0 ghz tuning 0 4 8 12 16 0.5 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c noise figure (db) frequency (ghz) -35 -30 -25 -20 -15 -10 -5 0 0.5 1 1.5 2 2.5 3 3.5 4 relative gain (db) frequency (ghz) 31.5 db 16 db 8 db 4 db 0.5, 1, 2 db -2 -1 0 1 2 0.5 1 1.5 2 2.5 3 3.5 4 bit error (db) frequency (ghz) 31.5 db 16 db 0.5, 1, 2, 4, 8 db -1 0 1 2 3 0 4 8 12 16 20 24 28 32 bit error (db) relative gain state (db) 2.0, 4.0 ghz 1.0 ghz 3.0 ghz -30 -20 -10 0 10 20 30 0.5 1 1.5 2 2.5 3 3.5 4 relative phase (deg) frequency (ghz) 31.5 db 16 db 8 db -35 -30 -25 -20 -15 -10 -5 0 0.5 1 1.5 2 2.5 3 3.5 4 relative gain (db) frequency (ghz) 31.5 db 16 db 8 db 4 db 0.5, 1, 2 db [2] max gain state [4] input attenuator set to 0 db state [3] output attenuator set to 0 db stat for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 9 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz output attenuator bit error vs. frequency [4] (major states) output attenuator relative phase vs. frequency [4] (major states) output attenuator bit error vs. attenuation state [4] (major frequencies) 0.7 to 4.0 ghz tuning -2 -1 0 1 2 0.5 1 1.5 2 2.5 3 3.5 4 bit error (db) frequency (ghz) 31.5 db 0.5, 1, 2, 4, 8, 16 db -1 0 1 2 3 0 4 8 12 16 20 24 28 32 bit error (db) relative gain state (db) 1.0, 2.0 ghz 3.0, 4.0 ghz -40 -20 0 20 40 0.5 1 1.5 2 2.5 3 3.5 4 relative phase (deg) frequency (ghz) 31.5 db 16 db 8 db 0.5, 1, 2, 4 db [4] input attenuator set at 0 db state for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 10 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz serial control interface the HMC743ALP6CE contains a 3-wire spi compatible digital interface (serin, clk, lea or leb and bo) to control 8-bit word serial data. the input (in) and output (out) attenuators can be individually controlled via the latch enable pins. the lea pin latches the serial 8-bit word to the output attenuator. the leb pin latches the serial 8-bit word to the input attenuator. the HMC743ALP6CE can be serially controlled in one of two user-selectable modes: most signifcant bit frst (msb- frst), or least signifcant bit frst (lsb-frst). the serial data order is selected by control input bo (bit order select). bo = high sets the msb-frst mode and the bo = low sets the lsb-frst mode. after the 8-bit serial data is clocked in, the latch enable (lea,leb) is pulsed to set the state of attenuator(s) according to the truth table. the input and output attenuators can be controlled independently by applying this procedure separately for each attenuator and using the correct latch enable(lea or leb) , or a single control word can set both attenuators by frst clocking in the 8-bit serial data word, then applying latch enable pulses to lea and leb, either one by one or simultaneously to change the content of the registers. msb-first timing diagram ( bo = high ) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 11 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz parameter typ. min. serial period, t sck 100 ns control set-up time, t cs 20 ns control hold-time, t ch 20 ns le setup-time, t ln 10 ns min. le pulse width, t lew 10 ns min le pulse spacing, t les 630 ns serial clock hold-time from le, t ckn 10 ns pup truth table le (a and b) pup1 pup2 gain relative to max setting 0 0 0 -63 db 0 1 1 0 db lsb-first timing diagram ( bo = low ) bit order select msb-frst lsb-frst bo 1 0 control voltage input attenuation d5 d4 d3 d2 d1 d0 high high high high high high 0 db high high high high high low -0.5 db high high high high low high -1 db high high high low high high -2 db high high low high high high -4 db high low high high high high -8 db low high high high high high -16 db low low low low low low -31.5 db any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. truth table (for each attenuator) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 12 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. absolute maximum ratings rf input power [1] 11.5 dbm (t = +85 c) digital inputs ( clk, lea, leb, serin, pup1, pup2 & b0 ) -0.5v to vdd +0.5v bias voltage (vdd) 5.6v collector bias voltage (vcc) 5.5v channel temperature 150 c continuous pdiss (t = 85 c) (derate 8.4 mw/ c above 85 c) [2] 0.546 w thermal resistance [3] 119 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a [1] the maximum rf input power increases by the same amount the gain is reduced by the input attenuator. the maximum input power at any state is no more than 28 dbm. [2] this value is the total power dissipation in the amplifer. [3] this is the thermal resistance for the amplifer. electrostatic sensitive device observe handling precautions bias voltage voltage (v) current (typ.) (ma) vdd + 3.0 4 + 5.0 5 vcc + 5.0 82 control voltage table state vdd = +3v , vcc = + 5v vdd = vcc = +5v low 0 to 0.5v @ <1 a 0 to 0.8v @ <1 a high 2 to 3v @ <1 a 2 to 5v @ <1 a for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 13 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz part number package body material lead finish msl rating package marking [2] HMC743ALP6CE rohs-compliant low stress injection molded plastic 100% matte sn msl1 [1] h743a xxxx [1] max peak refow temperature of 260 c [2] 4-digit lot number xxxx package information pin number function description interface schematic 1 rf1 this pin is dc coupled. an off chip dc blocking capacitor is required. 38 rf6 rf output and dc bias for the output stage of the amplifer. 2, 8, 15, 18 - 20, 28, 35, 39 n/c no connection 3, 23 serout, serin data in and out pins 4, 5 pup1, pup2 controls power up state 21, 22 leb, lea lea is the latch enable for the output attenuator. leb is the latch enable for the input attenuator. 24 clk clock input 25 bo controls bit order of control word. b0 - high = msb frst b0 - low = lsb frst 6 vdd supply voltage 7, 16, 27, 36 rf2, rf3, rf4, rf5 these pins are dc coupled and matched to 50 ohms. blocking capacitors are required. select value based on lowest frequency of operation. 9 - 14 acg1 - acg6 external capacitors to ground are required. place capacitor as close to pins as possible. see components for selected frequencies table. 17, 26, 37, 40 paddle gnd these pins and the exposed ground paddle must be connected to rf/dc ground. 29 - 34 acg7 - acg12 external capacitors to ground are required. place capacitor as close to pins as possible. see components for selected frequencies table. pin descriptions for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 14 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz application circuit tuned frequency 70 - 1000 mhz 700 - 4000 mhz evaluation pcb 124459 - hmc743alp6c [1] 124460 - hmc743alp6c [1] c3 (pf) 1000 100 c1, c2, c4, c14 (pf) 3300 100 c8, c10 (pf) 100 330 c15 (pf) 2200 1000 l1 (nh) 560 36 [1] reference this number when ordering complete evaluation pcb. components for selected frequencies * power-up states the HMC743ALP6CE offers two different power up states, either full attenuation or maximum gain mode. see pup truth table. power-on sequence the ideal power-up sequence is: gnd, vdd, digital inputs, rf inputs. the relative order of the digital inputs are not important as long as they are powered after vdd / gnd for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
variable gain amplifiers - digital - smt 15 HMC743ALP6CE v00.1212 0.5 db lsb gaas mmic dual 6-bit digital variable gain amplifier, dc - 4 ghz evaluation pcb the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hit - tite upon request. list of materials for evaluation [1] item description j1, j2 pcb mount sma connector j3 18 pos header, 2mm j4, j5 dc pin c1 - c4 capacitor, 0402 pkg. [1] c5 - c7 330 pf capacitor, 0402 pkg. c8, c10 capacitor, 0402 pkg. [1] c9 100 pf capacitor, 0402 pkg. c15 capacitor, 0603 pkg. [1] l1 inductor, 0603 pkg. r1 1.8 ohm resistor, 1206 pkg. u1 HMC743ALP6CE variable gain amplifer pcb [2] 118866 evaluation pcb [1] please reference components for selected frequencies table [2] circuit board material: arlon 25fr or rogers 4350 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: analog devices inc.: ? 124460-hmc743alp6c? HMC743ALP6CE? HMC743ALP6CEtr

▲Up To Search▲

Price & Availability of HMC743ALP6CE

	To Download HMC743ALP6CE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .