unisonic technologies co., ltd bat54ts preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2012 unisonic technologies co., ltd qw-r601-068.b surface mount schottky barrier ? description the utc bat54ts is a schottky barrier rectifier with high switching speed, esd protection and low forward voltage. ? features * high switching speed * low forward voltage ? symbol sod-523 1 2 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 bat54tsl-cc2-r BAT54TSG-CC2-R sod-523 a k tape reel note: pin assignment: a: anode, k: cathode bat54tsl-cc2-r (1) packing type (2) package type (3) halogen free (1) r: tape reel (2) cc2 : sod-523 (3) g: halogen free, l: lead free ? marking e4 l: lead free g: halogen free
bat54ts preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-068.b ? absolute maximum ratings (t a =25c, unless otherwise specified. fore capacitive load, derate current by 20%) parameter symbol ratings unit peak repetitive reverse voltage v rrm 30 v continuous forward current i f 0.2 a peak forward surge current, 1.0s single half sine-wave superimposed on rated load (jedec method) i fsm 0.6 a junction capacitance (v r =1v) c j 10 pf storage temperature t stg -55~+150 c operating junction temperature t j -55~+150 c note: absolute maximum ratings are those values beyond which the device coul d be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient ja 667 c/w ? electrical characteristics (t a =25c, unless otherwise specified. fore capacitive load, derate current by 20%) parameter symbol test conditions min typ max unit maximum instantaneous forward voltage v f i f = 0.1ma 0.24 v i f = 1ma 0.32 v i f = 10ma 0.4 v i f = 30ma 0.5 v i f = 100ma 0.8 v dc reverse current at rated dc blocking voltage i r v r = 25v 2 a
bat54ts preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-068.b utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
