f 02/24/05 sk completely redrawn, see ecn #949 - - - see engineering for revisions a-e h 11/29/06 sk see ecn #1208 for changes g 07/17/06 sk see ecn #1196 for changes .28 7.1 7/32 5.6 solidworks push spacer created using description a c see table part # chkd: app: dwn: dt: type sheet size: sheet: file #: 02/24/05 1 of 1 adz sk sk final dwg in in [mm] richco, inc. ps eng@richco-inc.com re: engr. date richco, inc. title: ang.=1 (773) 539-4060 print tolerances unless noted .xx=.010 .xxx=.005 frac.=1/64 rev. notes: 1.material: "impact modified" nylon 6/6 (rms-73) available by special order only. to order relace "-01" with "-73". material: " heat resistant" nylon 4/6 ul 94 v-2 (rms-109) available by special order only. to order replace "-01" with "-109" 2. color: black available by special order only. to order add suffix "bk" to part no. 3. part is also available in a 1/8 (3.2) thick chassis by special order only. to order use p/n: ps-2-xx-xx to snap-lock in a .187.003 [4.750.08] dia. hole, in a .031-.078 [0.79-1.98] panel thickness ref 7/32 [5.6] 2.8 .11 "a" .56 14.3 ref typical application material: nylon 6/6 ul 94 v-2 (rms-01) color: natural part no. material: nylon 6/6 ul 94 v-0 (rms-19) color: natural part no. dim. "a" .015 [0.4] ps-3-01 ps-3-19 3/16 [4.8] ps-4-01 ps-4-19 1/4 [6.4] ps-6-01 ps-6-19 3/8 [9.5] ps-7-01 ps-7-19 7/16 [11.1] ps-8-01 ps-8-19 1/2 [12.7] ps-10-01 ps-10-19 5/8 [15.9] ps-12-01 PS-12-19 3/4 [19.1] ps-14-01 ps-14-19 7/8 [22.2]
|
