printed in 8 6 $ p/n 28436 5 h y + otb series opto-touch banner optical touch buttons are touch-activated photoelectric switches designed to replace capacitive touch switches and mechanical push buttons. the opto-touch's spdt electromechanical relay or solid-state output (de- pending upon model) is activated for as long as a finger, introduced into the "touch area" (yoke) of the switch, interrupts the opto-touch's infrared sensing beam. banner optical touch buttons are ergonomically designed to eliminate the hand, wrist, and arm stresses associated with mechanical push buttons. they require absolutely no physical pressure to operate. led indicators light for "power on" and "output activated". all models are highly resistant to emi, rfi, and ambient light interference. otbs have either a black polysulfone (or red lexan ) upper housing and valox ? base. lexan models have the letter "l" in their model number suffix. environmental considerations for use of the two types differ; see specifications below. the 30- mm threaded base on all models provides easy mounting, and banner optical touch buttons are easily retrofitted to existing machines. see pages 2 and 5 for model listings. specifications otb series momentary action optical touch button (qd model shown) warning. banner opto-touch otb and otbl series optical touch buttons are intended as general-purpose initiators, and are not safety devices. like most solid-state devices, they are as equally likely to fail in the conducting ("on") state as in the non-conducting ("off") state. if opto-touch optical touch buttons are used to initiate machines or operations in which false operation of an optical touch button could be dangerous, point-of-operation guarding devices or related safety controls must be installed and maintained to meet all appropriate osha regulations and ansi b11 machine safety standards. m30 x 1,5 external threads and 1/2" npsm internal threads. base requires a 1-3/16" diameter mounting hole (fits most standard automo- tive-size "jumbo" legend plates and oiltight pushbutton holes). sup- plied with a field cover of polycarbonate-pet polyester. opto- touch otbs are rated nema 1, 3, 4, 4x, 12, and 13. cable: dc-only quick-disconnect (qd) models require model mbcc- 412 4-conductor mini-type cable (p/n 25226); ac and ac/dc quick- disconnect (qd) models require mbcc-512 5-conductor cable (p/n 25496; cables are purchased separately). mini-type qd cables are 12 feet long. models with attached cable (non-qd models) are supplied with 6 feet of pvc-jacketed, 22 awg 4- or 5-conductor cable. environmental considerations (models with polysulfone housing) : prolonged exposure of the opto-touch to direct outdoor sunlight will cause embrittlement of the polysulfone housing. window glass effectively filters longer wavelength ultraviolet and provides excel- lent protection from sunlight. contact the factory application engi- neering department regarding outdoor applications. environmental considerations (models with lexan housing) : prolonged exposure of the opto-touch to hot water and moist high-temperature environments above 150 f (66 c) should be avoided. aromatic hydrocarbons (such as xylene and toluene), halogenated hydrocarbons, and strong alkalis should be avoided. clean periodically using mild soap solution and a soft cloth. avoid strong alkaline materials. momentary action optical touch buttons supply voltage: models for 105 to 130v ac, 210 to 250v ac (50/60 hz), 10 to 30v dc, or 20 to 30v ac/dc (at 25 ma, exclusive of load). output configuration: ac and ac/dc models: all models have spdt electromechanical relay (one n.o. contact, one n.c. contact). dc-only models: otbvn6 models have complementary npn sinking outputs; otbvp6 models have complementary pnp sourcing outputs. output rating: ac and ac/dc models: maximum voltage is 250v ac or 30v dc. maximum current is 7 amps (resistive load), 1 hp max. minimum load is .05 watts (dc), .05va (ac). mechanical life of relay is 50,000,000 operations (minimum). electrical life of relay is 100,000 operations (min.) at full resistive load. transient suppression recommended when switching inductive loads. dc models: 150 ma maximum load (each output). ambient light immunity: 120,000 lux (direct sunlight). emi/rfi immunity: the opto-touch is highly resistant to both single and mixed emi and rfi noise sources. operating temperature range: -20 to +50 c (-4 to +122 f). indicator leds: two indicator leds. one lights whenever power is "on"; the other lights whenever the output relay is activated. construction: black polysulfone (or red lexan ) upper housing and fiber-reinforced valox base. electronics fully epoxy-encap- sulated. totally sealed, non-metallic enclosure. threaded base has e71083 lr41887-24 read all warnings carefully.
2 otbvp6(l) and otbvp6(l)qd complementary sourcing outputs otbvn6(l) and otbvn6(l)qd complementary sinking outputs models otba5(l) 120v ac, spdt electromechanical relay output, 6-foot attached cable otba5(l)qd 120v ac, spdt electromechanical relay output, qd base (use mbcc-512 cable) otbb5(l) 220/240v ac, spdt electromechanical relay output, 6-foot attached cable otbb5(l)qd 220/240v ac, spdt electromechanical relay output, qd base (use mbcc-512 cable) otbvr81(l) 20-30v ac or dc*, spdt electromechanical relay output, 6-foot attached cable) otbvr81(l)qd 20-30v ac or dc*, spdt electromechanical relay output, qd base (use mbcc-512 cable) otb series momentary action opto-touch qd models require model mbcc-512 cable (p/n 25496, purchase separately). model otbvn6(l)qd requires mbcc-412 cable (p/n 25226, purchase separately). model otbvp6(l)qd requires mbcc-412 cable (p/n 25226, purchase separately). quick disconnect (qd) option (order model mbcc-412 or mbcc-512 mini-type cable) sjt-type cable, 12 foot lengths cable connector end view, mbcc-412 cable connector end view, mbcc-512 cable connector, side view cable (p/n 25226), for dc-only models cable (p/n 25496), for ac and ac/dc models (mbcc-412 and mbcc-512 cable) hookup information and model listing ac and ac/dc models (see page 5 for ordering information) add "l" to specify lexan upper housing (others are polysulfone); "qd" in model suffix indicates quick disconnect base. (+) (-) *20-30v dc power may be applied without regard to polarity the model smb30s swivel-mount bracket (p/n 33204) is a versatile means for mounting a banner opto-touch optical touch button. the smb30s lets you ergonomically position the opto-touch on most machinery for maximum operator comfort and convenience. the smb30s mounts by its base. its swivel ball locks snugly in place when its two clamping bolts are tightened. bracket material is black valox . hardware is stainless steel, and mounting bolts are included. the photo shows a model smb30s bracket with an opto-touch attached. hookup information and model listing 10-30v dc models (see page 5 for ordering information) add "l" to specify lexan upper housing (others are polysulfone); "qd" in model suffix indicates quick disconnect base. (+) (-) otba5 models: 105 to 130vac otbb5 models: 210 to 250v ac otbvr81 models: 20 to 30v ac or dc*
otb series momentary action opto-touch safety instruction a field cover has been supplied with this opto-touch. it should be installed, as shown in the drawing at the right, to minimize the possibility of unintended switch operation. if this cover is missing or has become lost or damaged, contact banner immediately at (612) 544-3164 for a no-charge replacement. ! 3 opto-touch base 4-pin qd base (dc models) opto-touch base 5-pin qd base (ac and ac/dc models) dimensions (see also qd base, shown above) opto-touch field covers (see drawing, below) are designed to prevent inadvertent activation of opto-touchs due to objects (loose clothing, debris, etc.) which might accidentally block their sensing beam. field covers are constructed of rugged polycarbonate-pet polyester blend, which is capable of absorbing high impacts (even at low temperatures). this material is highly resistant to abrasion and to damage by most chemicals. every opto-touch is supplied with a black field cover, as standard. field covers are available separately in four colors, which can be used to differentiate touch button functions when several touch buttons are in use: black model otc-1-bk, p/n 30221 red model otc-1-rd, p/n 30977 yellow model otc-1-yw, p/n 30978 green model otc-1-gn, p/n 30979 opto-touch field covers valox and lexan are registered trademarks of general electric company.
use of opto-touch optical touch buttons for two-hand machine trip controls requirements for anti-tiedown circuitry two-hand trip control has been a popular means for actuation of single-stroke presses and other single-cycle machinery for many years. optical touch buttons (otbs) provide an ergonomic (stress-free) alternative to conventional mechanical push buttons used as actuators in two-hand trip controls. osha requirement for anti-tiedown control use of otbs for two-hand trip machine actuation must include "anti-tiedown" control to prevent any means of defeating one or both actuators to create a one-hand trip. federal law mandates the use of anti-tiedown control when two-hand trip actuators are used for cycle initiation of a single stroke part revolution clutched mechanical power press. osha code of federal regulation, 7-1-92 edition, cfr title 29, part 1910.217 (b) (6) (i) states: "a two-hand trip shall have the individual operator?s hand controls protected against unintentional operation and have the individual operator?s hand controls arranged by design and construction and/or separation to require the use of both hands to trip the press and use a control arrangement requiring concurrent operation of the individual operator?s hand controls. " concurrent or "synchronous" actuation of two-hand trips is the most popular approach to anti-tiedown control. european standard pren 574, titled "safety of machinery - two-handed control device", defines synchronous actuation as follows: "6.7 synchronous actuations in synchronous actuation an output signal shall be generated only when both control actuating devices are actuated - in a time which is less than or equal to 0.5 seconds... ... if the control actuating devices are not actuated synchronously the output signal shall be prevented and it shall be necessary to release both control actuating devices and to reinitiate both input signals." important application information note: in addition to the standards and regulations mentioned above, there are numerous regulations and machine safety standards that apply to specific industries. for assistance in obtaining copies of any of these standards, contact banner at the address or numbers listed at the bottom of page 6 . 4 ! ! warning ! in the united states, the functions that a two-hand control device is intended to perform are regulated by the occupational safety and health administration (osha). whether or not any particular two-hand control system installation meets all applicable osha requirements depends upon the details of how the two-hand control device is applied, installed, operated, and maintained. when properly installed, a two-hand control device using opto-touch otb series optical touch buttons can provide protection only for the hands of the machine operator, and is not a point of operation personnel guarding device, as defined by osha regulations. it is necessary to install point of operation guarding devices, such as safety light curtains and/or hard guards, to protect personnel from dangerous machine motion. warning! never use an opto-touch optical touch button as an actuator in an emergency stop (e-stop) circuit. e-stop actuators must be purely mechanical devices that require no power to operate. opto- touch optical touch buttons require power to operate and must not be used as e-stop actuators under any circumstances.
otba5 otbb5 otbvr81 otbvn6 otbvp6 otba5qd otbb5qd otbvr81qd otbvn6qd otbvp6qd otba5l otbb5l otbvr81l OTBVN6L otbvp6l otba5lqd otbb5lqd otbvr81lqd OTBVN6Lqd otbvp6lqd 27986 27987 33080 28591 28589 28149 28150 34078 28585 28590 32167 32254 34040 33706 34110 32255 32256 34041 35057 34997 35058 35062 35066 35070 35074 35059 35063 35067 35071 35075 35060 35064 35068 35072 35076 35061 35065 35069 35073 35077 35078 35082 35086 35090 35094 35079 35083 35087 35091 35095 35080 35084 35088 35092 35096 35081 35085 35089 35093 35097 35098 35102 35106 35110 35114 35099 35103 35107 35111 35115 35100 35104 35108 35112 35116 35101 35105 35109 35113 35117 220/240v ac 20-30v ac or dc 10-30v dc spdt relay npn (sinking) pnp (sourcing) attached 6-foot cable quick disconnect 120v ac opto-touch optical touch buttons part numbers - momentary action models model black cover red cover yellow cover green cover lexan? upper housing polysulfone upper housing important application information prevention of false actuation any anti-tiedown control must be designed to prevent accidental actuation. anti-tiedown circutry must be designed to ignore fa lse input signals. false signals include (but are not limited to) voltage transients, contact "bounce", and emi or rfi "noise". if a plc or any other solid-state controller is used to provide anti-tiedown, the design must assure that short duration signals (typically any signals less than a few milliseconds) are ignored. there are several manufacturers of anti-tiedown logic modules which include circuitry to minimize the possibility of false actuation. definitions: two-hand trip (control): a control that requires the operation of two separate control actuating devices by a machine operator's hands for initiation of a machine cycle. anti-tiedown (control): a two-hand trip control configured so that both of the operator's hands must be removed and then reapplied to the control actuating devices to start another machine cycle. (also called "anti-defeat " control.) 5 ordering information: opto-touch optical touch buttons are shipped with a black field cover, as standard. a black field cover will be received if the opto-touch is ordered by its model number (only). red, yellow, or green field cover may be specified instead by ordering the opto-touch using the appropriate 5-digit part number from the table, below. field covers may also be ordered separately (page 3). note: banner optical touch buttons are manufactured and sold under license for u. s patent #4,939,358.
banner engineering corp. 9714 tenth ave. no. minneapolis, mn 55441 telephone: (612)544-3164 fax (applications): (612)544-3573 banner engineering corp limited warranty banner engineering corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. banner engineering corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period.this warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the banner product. this limited warranty is exclusive and in lieu of all other warranties whether express or implied (including, without limitation, any warranty of merchantability or fitness for a particular purpose), and whether arising under course of performance, course of deal- ing or trade usage. this warranty is exclusive and limited to repair or, at the discretion of banner engineering corp., replacement. in no event shall banner engineering corp. be liable to buyer or any other person or entity for any extra costs, expenses, losses, loss of profits, or any incidental, consequential or special damages resulting from any product defect or from the use or inability to use the product, whether arising in contract or warranty, statute, tort, strict liability, negligence, or otherwise. banner engineering corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by banner engineering corp.
|
