1 technical data sheet sma female bulkhead connector crimp/solder (captive contact) attachment for rg316, rg174, rg188, .235 inch d hole confguration connector sma female connector interface type rg316,rg174,rg188 cable attachment method (shield/contact) crimp/solder (captive contact) body style straight mount method bulkhead electrical specifcations impedance, ohms 50 mechanical specifcations size length, in [mm] 1.152 [29.26] width/dia., in [mm] 0.312 [7.92] . weight, lbs [g] 0.013 [5.9] connector type sma female contact material and plating beryllium copper , gold body material and plating brass, nickel dielectric type ptfe compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level sma female bulkhead connector crimp/solder (captive contact) attachment for rg316, rg174, rg188, .235 inch d hole from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma female bulkhead connector crimp/solder (captive contact) attachment for rg316, rg174, rg188, .235 inch d hole PE4187 url: http://www.pasternack.com/sma-female-standard-rg316-rg174-rg188-connector-PE4187-p.aspx PE4187 PE4187 rev sma female bulkhead connector crimp/solder (captive contact) attachment for rg316, rg174, rg188, .235 inch d hole
? 2013 pasternack enterprises all rights reserved 2 PE4187 rev scale n/a dwg title cad file 147 fscm no. 53919 rev. - 042309 size a PE4187 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown. do not nick center conductor. tin center conductor. 2. slide ferrule (1) & clamp nut (2) over cable. flair braid & slide wedge assembly (3) under braid with center conductor protruding through hole in insulator. slide ferrule (1) over braid & against clamp nut. 3. solder contact to center conductor. clean. insert cable assembly into body & tighten. assembly procedures contact: solder ferrule: .128" hex crimp tool crimp size required sma female bulkhead connector crimp/solder (captive contact) attachment for rg316, rg174, rg188, .235 inch d hole PE4187 cad drawing
|