uts hi seal description dynamic ip68/ip69k - waterproof connec - tors in mated and unmated condition uts hi seal connector is a range of light- weight industrial plastic circular connec- tors compatible with mil-dtl-26482 connectors. it offers dynamic ip68/ip69k water protection in both mated & unma- ted conditions . available : ? in 5 shell sizes, ? up to 21 contact arrangements ? with multiple polarization options. connectors are standard supplied with preassembled handsolder contacts. for dispsolder or crimp contacts, please consult factory. applications uts hi seal connector is suitable for a broad range of applications, such as ? wet & submerged environments ? instrumentation ? meteorological measurement system ? traffc control ? videosurveillance ? tunnel fans ? water measurement and there is more. benefts protection of electronics inside the equipments/boxes in case of maintenance, unmated conditions or cable damage fully intermateable and interchangeable with existing solutions ? design based on mil-dtl-26482 connectors or equivalents such as : bs 9522 f0017, nfc93422, he301b, vg 95328. ideal for indoor / outdoor applications ? dynamic ip68/69k water protection (during vibration and cable mouvements) ? corrosion resistance operational safety - esd ? plastic shells rapid and secure locking system ? bayonet connector suitable for overmoulding ? sealed insulator and contacts respect for environment ? rohs compliant visual identifcation ? coloured rings
uts hi seal technical characteristics environmental ? operating temperature -40c to + 105c ? sealing (mated/unmated) dynamic ip68 - under water for 1 week, 1 bar dynamic ip69k per din 40050 ? salt spray 500 hours ? uv resistance 1000 hours per iso4892 ? rohs compliant & conform to the chinese standard sj/t1166- 2006 (chinese rohs equivalent) material ? housing + backshell thermoplastic ul94-v0 ? insert elastomer ? contacts copper alloy - gold plated other platings on request mechanical ? durability 250 matings & unmatings ? vibration resistance per cei 60512-4 ? thermal shock per mil-std1344 method 1003 electrical ? current per contact size 16: 13a size 20: 7.5a ? insulation resistance 5000 m ? under 500vcc at 25c ? test potential 500 v between contacts size 20 2300 v between contacts size 16 ? operating voltage 1500 veff between contacts size 20 2300 veff between contacts size 16 according to mil-dtl-26482 contacts arrangements size 8 2 contacts : 2 ? 1 (#20) 3 contacts : 3 ? 1 (#20) 3a/98 contacts : 3 ? 1 (#20) 4 contacts : 4 ? 1 (#20) 33 contacts : 3 ? 1 (#20) size 10 6 contacts : 6 ? 1 (#20) 7 contacts : 7 ? 1 (#20) 98 contacts : 6 ? 1 (#20) 3 contacts : 3 ? 1.6 (#16) 8 contacts : 8 ? 1 (#20) 10 contacts : 10 ? 1 (#20) 14 contacts : 14 ? 1 (#20) 2 contacts : 2 ? 1.6 (#16) 12 contacts : 8 ? 1 (#20) 4 ? 1.6 (#16) 15 contacts : 14 ? 1 (#20) 1 ? 1.6 (#16) 18 contacts : 18 ? 1 (#20) 19 contacts : 19 ? 1 (#20) 5 contacts : 5 ? 1.6 (#16) size 18* 11 contacts : 11 ? 1.6 (#16) 32 contacts : 32 ? 1 (#20) 30 contacts : 29 ? 1 (#20) 1 ? 1.6 (#16) size 12 size 14 * please consult factory
uts hi seal insert orientation* (viewed from front face of male insert) normal w x y z * 8-98 layout, w and x non standard ortientations / 10-7 & 12-14 layouts, x non standard orientation range presentation square fange receptacle with handsolder contacts part numbers shell size a max. b c max. ? d e f g h ? i ? j male contact female contact uts0 8e - - p uts0 8e - - s 8 21.50 2.30 11.70 11.92 15.10 20.55 3.20 10.67 14.50 11.50 uts0 10e - - p uts0 10e - - s 10 21.50 2.30 11.50 14.93 18.30 23.80 3.20 14.30 17.80 15.10 uts0 12e - - p uts0 12e - - s 12 21.50 2.30 11.50 19.00 20.60 26.20 3.20 17.50 22.20 18.20 uts0 14e - - p uts0 14e - - s 14 21.50 2.30 11.50 22.17 23.00 28.60 3.20 20.70 25.50 21.4 uts0 18e - - p* uts0 18e - - s* 18 21.50 2.50 11.50 28.52 27.00 33.30 3.20 27.00 31.80 27.80 ?d 0.15 c shell e 0.25 e 0.25 j i ?g 0.1 b a h f 0.25 e 0.25 e 0.25 f 0.25 4 holes ?g 0.1 connector family uts uts 7 6 - jc 8 8 e e 2 2 p s - - body variation 6 = cable plug + backshell / 7 = jam nut receptacle / 0 = square flange receptacle backshell : jc = backshell (only for plug) shell size : 8, 10, 12, 14, 18 contact type e = handsolder contacts / r = crimp contacts* / d = pc tail contacts* insert arrangement - see previous page contact gender : p = pin contacts / s = socket contacts insert rotatioon : no digit = normal / w, x, y, z = different orientations - see below how to order * please consult factory angle in degree shell sizes 8 10 12 14 18 layouts layouts layouts layouts layouts 2 3 3a (98)* 4 33 6 7* 98 3 8 10 2 14* 5 12 15 18 19 11 32 30 w 58 60 60 45 90 90 90 90 - 90 60 - 45 40 43 17 15 30 62 85 180 x 122 210 210 - - - - 180 - 112 155 - - 92 90 110 90 165 119 138 193 y - - - - - - - 240 180 203 270 - - 184 - 155 180 315 241 222 285 z - - - - - - - 270 - 292 295 - - 273 - 234 270 - 340 265 350 note : all dimensions are in mm / * please consult factory panel cut out
uts hi seal for further information, visit our website www.souriau-industrial.com or contact us at contactindustry@souriau.com jam nut receptacle with handsolder contacts part numbers shell size ? a b max. c max. d e f ? g tightening torque male contact female contact uts7 8e - - p uts7 8e - - s 8 12.00 19.30 3.20 24.00 19.30 13.75 14.60 2 nm uts7 10e - - p uts7 10e - - s 10 14.90 19.30 3.20 27.00 22.20 16.50 17.70 3 nm uts7 12e - - p uts7 12e - - s 12 19.00 19.30 3.20 31.80 27.00 21.20 22.50 4 nm uts7 14e - - p uts7 14e - - s 14 22.20 19.30 3.20 34.90 30.20 24.30 25.70 5 nm uts7 18e - - p* uts7 18e - - s* 18 28.50 19.30 3.20 41.30 36.60 30.60 32.00 5 nm cable plug with handsolder contacts part numbers shell size ? a max. b min. capacity c standard seal capacity c reducing seal hexagon male contact female contact uts6 jc 8e - - p uts6 jc 8e - - s 8 22.50 50.00 2.5 / 6.5 1.5 / 5 16 uts6 jc 10e - - p uts6 jc 10e - - s 10 26.70 63.20 2.5 / 8 1.5 / 5 18.5 uts6 jc 12e - - p uts6 jc 12e - - s 12 30.15 66.70 5 / 12 3 / 9 24 uts6 jc 14e - - p uts6 jc 14e - - s 14 35.10 71.50 7 / 14 5 / 12 26 uts6 jc 18e - - p* uts6 jc 18e - - s* 18 42.00 81.30 9 / 18 7 / 16 33 ? a coupling nut backshell body capacity c hexagon backshell plug insert b backshell nut several accessories are available, please refer to the uts catalogue. note : all dimensions are in mm / * please consult factory insert nut (see tightening torque) shell c max. panel thickness b max. thread oring a 0.15 e 0.3 d 0.25 g 0.20 f 0.20 panel cut out indutshsfl01en ? copyright souriau - all information in this publication presents only general particulars and shall not form part of any contract. all rights reserved to souriau for changes without prior notifcation or public announcement.
|