thin-film cascadable amplifier 5 to 1000 mhz technical data features ? frequency range: 5 to 1000 mhz ? high gain: 23.0 db (typ) ? medium output power: +14.0 dbm (typ) ? temperature compensated ? surface mount option applications ? if/rf amplification ? output stage description the 1021 series is a two-stage bipolar rf amplifier built on a thin-film substrate. active bias and resistive feedback provide for stability over temperature and bias voltage variations. input/ output blocking capacitors couple the rf through the amplifier while a low vswr is maintained through the use of inductive tuning. the 1021 series amplifiers are available in three packages: the to-8 hermetic case, the connectored tc-1 package or the surface mount planarpak pp-38. uto/utc 1021 series pin configuration utoto-8u ground case ground v + rf out rf in utctc-1 rf v + in rf out weight: (typical) uto2.1 grams; utc 21.5 grams; ppa0.5 grams schematic maximum ratings parameter maximum dc voltage +17 volts continuous rf input power +13 dbm operating case temperature C55 to +115 c storage temperature C62 to +150 c r series burn-in temperature +115 c rf out rf in v+ thermal characteristics 1 q jc 105/75 c/w 2 active transistor power dissipation 230/460 mw 2 junction temperature above case temperature 24/34 c 2 mtbf (mil-hdbk-217e, a uf @ 90 c) 575,400 hrs. notes: 1. values refer to first and second stages, respectively.
2 electrical specifications (measured in 50 w system @ +15 vdc nominal unless otherwise noted) symbol unit t c = e55 to +85 c 5-1000 21.0 1.0 5.0 +11.0 2.0:1 2.0:1 ? ? ? ? mhz db db db dbm ? ? dbm dbm dbm ma t c = 0 to 50 c guaranteed specifications typical t c = 25 c 5-1000 23.0 0.7 3.8 +14.0 <1.6:1 <1.6:1 +25.0 +30.0 +40.0 85 5-1000 22.0 1.0 4.5 +12.0 2.0:1 2.0:1 ? ? ? ? characteristic frequency range small signal gain (min.) gain flatness (max.) noise figure (max.) power output @ +1 db comp. (min.) input vswr (max.) output vswr (max.) two tone 3rd order intercept point two tone 2nd order intercept point one tone 2nd harmonic intercept point dc current bw gp ? nf p 1db ? ? ip 3 ip 2 hp 2 i d typical performance over temperature (@ +15 vdc unless otherwise noted) key: +25 c +85 c -55 c 24 gain, db 0 gain frequency, mhz 200 23 400 800 1000 22 20 600 noise figure, db frequency, mhz noise figure 4 0 200 3 400 800 1000 2 1 600 21 16 power output
@ 1 db gain
compression, dbm power output frequency, mhz 0 vswr input vswr frequency, mhz vswr output vswr frequency, mhz 200 2.0 1.75 1.5 1.25 1.0 0 200 400 600 12 1000 15 400 800 600 800 13 1000 2.0 0 200 600 1.0 1.75 400 800 1.5 1000 1.25 14 30 ip 3 , dbm third-order intercept point frequency, mhz 0 second-order intercept point frequency, mhz second-harmonic intercept point frequency, mhz 200 70 60 50 40 30 0 200 400 600 22 1000 28 400 800 600 800 24 1000 60 0 200 600 20 50 400 800 40 1000 30 26 20 ip 2 , dbm hp 2 , dbm
3 automatic network analyzer measurements frequency vswr gain phase phase group delay vswr isolation mhz in db degrees dev ns out db numerical readings bias = 15.00 volts 100.0 1.23 23.92 e19.76 e1.86 .00 1.46 39.57 200.0 1.29 23.86 e38.37 e.30 .53 1.47 38.06 300.0 1.32 23.81 e58.28 e.05 .55 1.50 38.34 400.0 1.33 23.86 e77.78 .60 .56 1.53 38.86 500.0 1.33 24.06 e97.55 .99 .53 1.57 39.30 600.0 1.33 24.08 e117.37 1.32 .56 1.62 40.29 700.0 1.37 24.08 e137.82 1.02 .58 1.69 41.20 800.0 1.46 23.88 e158.85 .17 .59 1.75 42.65 900.0 1.60 23.79 179.93 e.87 .57 1.80 44.65 1000.0 1.75 23.77 158.44 e2.20 .60 1.80 46.55 1100.0 1.92 23.89 137.08 ? .63 1.74 47.79 1200.0 2.05 23.50 113.77 ? .67 1.57 45.26 1300.0 1.94 22.61 89.77 ? .61 1.41 44.27 1400.0 1.81 21.46 68.99 ? .55 1.32 43.97 1500.0 1.75 20.55 50.19 ? .52 1.29 45.01 (typical production unit @ +25 c ambient) linearization range: 100.0 to 1000.0 mhz s-parameters s 21 100.0 .185 146.0 23.784 e18.6 e38.957 6.3 .127 171.9 200.0 .196 121.9 23.853 e36.4 e38.320 e7.7 .130 172.8 300.0 .208 101.8 23.911 e55.6 e38.914 e13.9 .144 166.8 400.0 .217 82.3 24.117 e74.8 e38.946 e21.9 .157 156.7 500.0 .214 60.7 24.500 e94.9 e39.187 e30.0 .174 142.7 600.0 .204 33.0 24.667 e115.4 e40.060 e39.4 .194 126.6 700.0 .203 e1.5 24.741 e137.0 e41.302 e46.9 .214 110.3 800.0 .218 e37.0 24.566 159.8 e43.007 e53.4 .235 54.0 900.0 .249 e67.7 24.335 177.3 e44.784 e54.5 .249 79.7 1000.0 .277 e93.1 24.053 154.6 e47.587 e41.4 .248 65.2 1100.0 .297 e116.5 23.828 132.8 e47.857 e23.1 .227 45.2 1200.0 .299 e143.5 23.064 109.9 e44.830 e21.8 .181 31.5 1300.0 .255 e172.2 21.912 87.4 e43.135 e30.0 .137 18.9 1400.0 .204 158.6 20.568 68.2 e42.697 e40.6 .110 6.5 1500.0 .169 127.2 19.516 50.7 e42.957 e43.3 .108 e9.7 bias = 15.00 volts frequency mhz mag ang db ang db ang mag ang s 11 s 22 s 12
4 product options uto e 509r screening option
blank = no screening
r = r-series screening
for more information on r-series screening,
see reliability screening, pub. 5963-3240e. model number prefix
uto-
utm-
ppa- model number utc ?509-1 connector option
for tc-1 case the only connector option
available is the -1. the -1 option consists
of a sma female connector on both the
input and output (see note). model number prefix
utc- model number note: r-series screening is not available in the tc-1 case as the case is non-hermetic. case drawings to-8u .031 .031 .50
dia .450
dia max .175 .017 0. 185
0.015 +.002 - 001 .150
typ .300
typ ground case
ground v .150
typ 3 4 2 1 45 + rf in approximate weight 2.1 grams rf out glass ring
.060 dia typ
(3x) notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010
gnd .350 .890 .460 .310 dc input .38
(2) pl .24 .19 sma jack (female)
(2) pl .180 .640 .905 .095 .250 .570 2-56 unc-2b x .15 deep
threaded insert
(4) pl .460 .310 .350 1.000 .820 product marking
area typical weight with connectors = 21.5 grams
rf .100 v + in rf out notes: 1. the tc-1 case is a non-hermetic case.
2. the only connector option available for the tc-1 case is the ?, sma female connectors at both input and output ports.
agc (if required) .890 .500 notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010 case drawings tc-1 contact teledyne cougar: 408-522-3838 408-522-3839 fax cougaramps@cougarcorp.com check for updates: www.teledyne-cougar.com
|
