unisonic technologies co., ltd 2nnpp06 power mosfet www.unisonic.com.tw 1 of 6 copyright ? 2012 unisonic technologies co., ltd qw-r502-781.b 60v complementary enhancement mode mosfet h-bridge (n-channel/p-channel) ? description the utc 2nnpp06 is a complementary enhancement mode mosfet h-bridge, it uses utc advanced technology to provide customers low on resistance, low gate charge and low threshold voltage. the utc 2nnpp06 is universally applied in dc-ac inverters and dc motor control. ? features * n-channel - r ds(on) = 0.25 ? @v gs = 10v, i d =1.8a - r ds(on) = 0.35 ? @v gs =4.5v, i d =1.3a * p-channel - r ds(on) = 0.4 ? @v gs = -10v, i d =-0.9a - r ds(on) = 0.6 ? @v gs =-4.5v, i d =-0.8a * high switching speed * low gate charge (n:-ch ty p.=3.2nc, p-ch: typ.=5.1nc) ? symbol sop-8 ? ordering information ordering number package packing lead free halogen free 2nnpp06l-s08-r 2nnpp06g-s08-r sop-8 tape reel 2nnpp06l-s08-t 2NNPP06G-S08-T sop-8 tube
2nnpp06 power mosfet unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r502-781.b ? pin configuration
2nnpp06 power mosfet unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r502-781.b ? absolute maximum ratings parameter symbol ratings unit n-channel p-channel gate-source voltage v gss 20 20 v drain-source voltage v dss 60 -60 v drain current continuous v gs =10v, t a =25c, t 10 sec i d 1.8 -1.42 a pulsed v gs =10v, t a =25c (note 1) i dm 7.1 -6.03 a power dissipation t a =25c p d 0.87 w derating 6.94 mw/c junction temperature t j -55~+150 c storage temperature range t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient (note 1) ja 144 c/w notes: 1. pulse width 300 s; duty cycle 2%. the pulse current is limited by the maximum junction temperature. ? electrical characteristics (t a =25c, unless otherwise specified) for n-channel parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =250a, v gs =0v 60 v drain-source leakage current i dss v ds =60v, v gs =0v 0.5 a gate-source leakage current forward i gss v gs =+20v, v ds =0v +100 na reverse v gs =-20v, v ds =0v -100 na on characteristics gate threshold voltage v gs ( th ) v ds =v gs , i d =250a 1 3 v static drain-source on-state resistance (note 1) r ds(on) v gs =10v, i d =1.8a 0.25 ? v gs =4.5v, i d =1.3a 0.35 ? dynamic parameters input capacitance (note 3) c iss v gs =0v, v ds =25v, f=1.0mhz 166 pf output capacitance (note 3) c oss 19.5 pf reverse transfer capacitance (note 3) c rss 8.7 pf switching parameters total gate charge (note 3) q g v gs =10v, v ds =30v, i d =1.8a 3.2 nc gate to source charge (note 3) q gs 0.67 nc gate to drain charge (note 3) q gd 0.82 nc turn-on delay time (note 2, 3) t d ( on ) v dd =30v, i d =1a, r g 6 ? , v gs =10v 1.8 ns rise time (note 2, 3) t r 1.4 ns turn-off delay time (note 2, 3) t d ( off ) 4.9 ns fall-time (note 2, 3) t f 2.0 ns source- drain diode ratings and characteristics maximum body-diode continuous current i s t a =25c (note 2) 1.8 a maximum body-diode pulsed current i sm t a =25c (note 3) 7.1 a drain-source diode forward voltage(note 1) v sd i s =0.45a, v gs =0v 0.8 0.95 v
2nnpp06 power mosfet unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r502-781.b ? electrical characteristics(cont.) (t a =25c, unless otherwise specified) for p-channel parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =-250a, v gs =0v -60 v drain-source leakage current i dss v ds =-60v, v gs =0v -0.5 a gate-source leakage current forward i gss v gs =+20v, v ds =0v +100 na reverse v gs =-20v, v ds =0v -100 na on characteristics gate threshold voltage v gs ( th ) v ds =v gs , i d =-250a -1 -3 v static drain-source on-state resistance (note 1) r ds(on) v gs =-10v, i d =-0.9a 0.4 ? v gs =-4.5v, i d =-0.8a 0.6 ? dynamic parameters input capacitance (note 3) c iss v gs =0v, v ds =-25v, f=1.0mhz 141 pf output capacitance (note 3) c oss 13.1 pf reverse transfer capacitance (note 3) c rss 10.8 pf switching parameters total gate charge (note 3) q g v gs =-10v, v ds =-30v, i d =-0.9a 5.1 nc gate to source charge (note 3) q gs 0.7 nc gate to drain charge (note 3) q gd 0.7 nc turn-on delay time (note 2, 3) t d ( on ) v dd =-30v, i d =-1a, r g 6 ? , v gs =-10v 1.6 ns rise time (note 2, 3) t r 2.3 ns turn-off delay time (note 2, 3) t d ( off ) 13 ns fall-time (note 2, 3) t f 5.8 ns source- drain diode ratings and characteristics maximum body-diode continuous current i s t a =25c (note 2) -1.42 a maximum body-diode pulsed current i sm t a =25c (note 3) -6.03 a drain-source diode forward voltage (note 1) v sd i s =-0.8a, v gs =0v -0.85 -0.95 v notes: 1. measured under pulsed conditions. pulse width 300 s; duty cycle 2%. 2. switching characteristics are inde pendent of operating junction temperature 3. for design aid only, not subject to production testing
2nnpp06 power mosfet unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r502-781.b ? test circuits and waveforms 50k ? 300nf dut v ds 12v charge q gs q gd q g gate charge test circuit gate charge waveforms v gs v gs 200nf same type as dut 3ma 10v
2nnpp06 power mosfet unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r502-781.b ? typical characteristics drain current, i d (a) drain current, -i d (a) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
