design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed induct ors (chip inductors) ? 125 ? e 1 l 2 j 3 d 4 a 5 6 6 8 7 0 8 j 9 f 10 taping f chip inductors product code 11 shape size : mm (inch) da 3225 (1210) inductance tolerance 5% j packaging design no. inductance 39 h 47 h 56 h 68 h 82 h 100 h 390 470 560 680 820 101 e 1 l 2 j 3 f 4 a 5 6 6 8 7 0 8 j 9 fd 10 taping f low distortion type d chip inductors product code 11 shape size : mm (inch) fa 3225 (1210) inductance 39 h 47 h 56 h 68 h 82 h 100 h 390 470 560 680 820 101 inductance tolerance 5% j packaging design no. 7. signal proc essing use (low distortion type) da, fa***d features ? general use wire wound and resin molded chip inductor. ? low distortion type suitable for signal processing. ? 2 line-up of super low distortion series and low distortion type. ? good mounting characteristic. recommended applications ? all kinds of broadband modem, router and stb etc. ? corresponds to sam ic chipset. ? low distortion type storage conditions ? package : normal temperature (?5 to 35 c), normal humidity (85 %rh max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause de w. ? operating temp erature : ?20 to +85 c storage period ? solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. even if storage conditions are within speci? ed limits, solderability may be reduced with the passage of time. therefore, please control the storage conditions and try to use the product within 6 months of receipt. explanation of part numbers ? super low distortion type eljda eljfa sep. 2010 00
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed induct ors (chip inductors) ? 126 ? 0.6 0.2 3.2 0.3 2.2 0.2 2.5 0.2 1.9 0.1 marking 1.9 to 2.4 4.0 to 4.6 1.6 to 2.0 recommended land pattern in mm (not to scale) dimensions in mm (not to scale) da/fa***d y type 3225(1210) standard packing quantity 2000 pcs./reel standard parts(super low distortion type) ? 1 : self resonant frequency ? 2 : dc resistance standard parts(low distortion type) ? 1 : self resonant frequency ? 2 : dc resistance part no. inductance q srf ? 1 (mhz) min. r dc ? 2 ( ) max. dc current (ma) max. (h) tolerance (%) test freq. (mhz) min. test freq. (mhz) eljda390jf 39 j : 5 % 2.52 21 2.52 11 5.2 110 eljda470jf 47 10 5.9 105 eljda560jf 56 8.5 6.5 100 eljda680jf 68 7.5 9.0 85 eljda820jf 82 19 7 10.0 80 eljda101jf 100 0.796 24 0.796 7 13.0 70 part no. inductance q srf ? 1 (mhz) min. r dc ? 2 ( ) max. dc current (ma) max. (h) tolerance (%) test freq. (mhz) min. test freq. (mhz) eljfa390jfd 39 j : 5 % 2.52 30 2.52 12 6.0 105 ELJFA470JFD 47 12 6.7 100 eljfa560jfd 56 12 7.0 95 eljfa680jfd 68 12 9.0 85 eljfa820jfd 82 10 12.0 75 eljfa101jfd 100 0.796 20 0.796 10 14.0 70 packaging methods please see page 127 soldering conditions please see page 128 safety precautions please see page 129 sep. 2010 00
|
