www.pairuigroup.com page: 1 / 3 date:12/17/2013 dc-dc converter dip-package DMV-5W series, 5watt, 4:1 input range features: 3 years warranty 1500vdc isolation voltage metal case with low ripple and noise operating temperature range -40c to +85c short circuit and input under voltage protection model input voltage (vdc) output voltage (vdc) output current (ma) efficiency typ. dmv5w-1811 18(9~36) 3.3 1000 82% dmv5w-1812 5 1000 82% dmv5w-1813 9 550 82% dmv5w-1814 12 410 82% dmv5w-1815 15 330 82% dmv5w-1816 24 210 82% dmv5w-1821 3.3 500 82% dmv5w-1822 5 500 82% dmv5w-1823 9 275 82% dmv5w-1824 12 205 82% dmv5w-1825 15 165 82% dmv5w-1826 24 100 82% dmv5w-3611 36(18~72) 3.3 1000 82% dmv5w-3612 5 1000 82% dmv5w-3613 9 550 82% dmv5w-3614 12 410 82% dmv5w-3615 15 330 82% dmv5w-3616 24 210 82% dmv5w-3621 3.3 500 82% dmv5w-3622 5 500 82% dmv5w-3623 9 275 82% dmv5w-3624 12 205 82% dmv5w-3625 15 165 82% dmv5w-3626 24 100 82% notes: other input and output models may available on reques t.
www.pairuigroup.com page: 2 / 3 date:12/17/2013 dc-dc converter dip-package DMV-5W series, 5watt, 4:1 input range electrical output voltage accuracy --- vo1, vo2 : 1.0%, 3.0% line regulation nominal load, full voltage vo1, vo2 : 0.2%, 1.5% load regulation 20% ~ 100% full load vo1, vo2 : 0.5%, 4.0% dynamic response (transient/recovery time) 5%-50%-75% load capability ?vo1/?t: 4.0%/500s ripple and noise 20mhz bm, full load vo5.0v, 50mvp-p vo48v, 180mvp-p other, 100mvp-p operating frequency typical value 300khz typ./330khz max. turn-on delay time typical value 200ms isolation voltage (<0.5ma/min) input to output 1500vdc input to case 500vdc efficiency nominal input, full load vo5.0v, 80% typ. vo>5.0v, 82% typ. operating temperature range --- -40c to +85c storage temperature range --- -55c to +120c short circuit protection --- auto-recovery input under voltage protection when input voltage is lower than the low terminal input voltage auto-recovery relative humidity --- 10%-90% max. mtbf bellcore tr-332, 25c 2x10 5 hrs notes: unless otherwise specified, all the parameters of th e test conditions are as follows: ambient temperature 25 , the nominal input voltage, pure resistive nominal load. mechanical connection pin # single dual 1 -vin -vin 2 +vin +vin 3 +vo +vo1 4 no pin com 5 gnd -vo2 note: * unit is mm(inch).
www.pairuigroup.com page: 3 / 3 date:12/17/2013 dc-dc converter dip-package DMV-5W series, 5watt, 4:1 input range temperature profile notes recommended test and application circuit fuse: depends on the actual input current; tvs: depends on the actual input voltage; recommended capacitor: c1,c2,c5,c8, about 0.1uf; c6: 22uf -100uf; c7, c9: 10uf/10ma.
|
